FantasticSearch

1. Conformity to type based on internal production control is the part of a conformity assessment procedure whereby the manufacturer fulfils the obligations laid down in points 2 and 3, and ensures and declares under its sole responsibility that the machinery or related product concerned is in conformity with the type described in the EU type-examination certificate and satisfies the applicable requirements of this Regulation.

2. ManufacturingThe manufacturer shall take all measures necessary so that the manufacturing process and its monitoring ensure conformity of the manufactured machinery or related products with the type described in the EU type-examination certificate and with the applicable requirements of this Regulation.

3. CE marking and EU declaration of conformity 3.1. The manufacturer shall affix the CE marking to all machinery or related products that are in conformity with the type described in the EU type-examination certificate and satisfy the applicable requirements of this Regulation.

3.2. The manufacturer shall draw up an EU declaration of conformity for a machinery or related product model and keep it at the disposal of the national authorities for at least 10 years after the machinery or related product has been placed on the market or put into service. The EU declaration of conformity shall identify the machinery or related product for which it has been drawn up. A copy of the EU declaration of conformity shall be made available to the relevant authorities upon request.

4. Authorised representativeThe manufacturer’s obligations set out in point 3 may be fulfilled by its authorised representative, on its behalf and under its responsibility, provided that they are specified in the mandate.