FantasticSearch

Rules on data to be monitored and reported pursuant to Articles 13a and 13b PART A: DATA TO BE MONITORED AND REPORTED BY MEMBER STATES (a) vehicle identification numbers of all new heavy-duty vehicles as referred to in Article 2 that are registered in the Member State territory;

(b) manufacturer name;

(c) make (trade name of manufacturer);

(d) the code for the bodywork as specified in entry 38 of the certificate of conformity, including, where applicable, the supplementing digits referred to in Appendix 2 of Annex I to Regulation (EU) 2018/858;

(e) in the case of the heavy-duty vehicles referred to in Article 2(1), first paragraph, point (a) or (b), the information on the powerplant specified in entries 23, 23.1 and 26 of the certificate of conformity;

(f) the maximum speed of the heavy-duty vehicle as specified in entry 29 of the certificate of conformity;

(g) the stage of completion, as indicated in the chosen model of the certificate of conformity in accordance with point 2 of Annex VIII to Commission Implementing Regulation (EU) 2020/683 ();

(h) the vehicle category as specified in entry 0.4 of the certificate of conformity;

(i) the number of axles, as specified in entry 1 of the certificate of conformity;

(j) the TPMLM, as specified in entry 16.1 of the certificate of conformity;

(k) the imprint of the cryptographic hash of the manufacturer’s records file as specified in entry 49.1 of the certificate of conformity; for heavy-duty vehicles registered until 30 June 2025 Member States may report only the first 8 characters of the cryptographic hash;

(l) the specific CO2 emissions as specified in entry 49.5 of the certificate of conformity;

(m) the average payload value as specified in entry 49.6 of the certificate of conformity;

(n) the date of registration;

(o) the TPMLM of the combination for a heavy-duty vehicle of category N3 in an extra heavy combination (EHC) referred to in Article 3, point (25), as specified in entry 16.4 of the certificate of conformity or individual vehicle approval certificate;

(p) for special purpose vehicles, their designation as specified in entry 51 of the certificate of conformity;

(q) the number of powered axles, as specified in entry 3 of the certificate of conformity;

(r) for heavy-duty vehicles approved under Article 2(3), point (b), of Regulation (EU) 2018/858, the information that the heavy-duty vehicle was designed and constructed or adapted for use by civil protection services, fire services and forces responsible for maintaining public order;

(s) for heavy-duty vehicles registered for use by civil protection services, fire services or forces responsible for maintaining public order, the confirmation that the vehicle is registered for use by civil protection services, fire services or forces responsible for maintaining public order and that it fulfils the conditions set out in Article 3a(5) of this Regulation. For all heavy-duty vehicles, including individually approved heavy-duty vehicles, the corresponding information shall be the information as to be provided in the EU certificate of conformity or EU individual vehicle approval certificate or the national individual approval certificate in accordance with the templates laid down in Implementing Regulation (EU) 2020/683 regardless of any national exemptions applicable under Article 45(1) of Regulation (EU) 2018/858. PART B: DATA TO BE REPORTED BY MANUFACTURERS AND OTHER ENTITIES

In accordance with Article 13b of this Regulation, each reporter shall report the following data for those heavy-duty vehicles for which it is obliged to produce a Manufacturer’s Records File (MRF) or Vehicle Information File (VIF) in accordance with Regulation (EU) 2017/2400 and Implementing Regulation (EU) 2022/1362. For heavy-duty vehicles referred to in Part A, points (p) and (q), of Annex IV, the manufacturer referred to in Article 7a shall also inform the Commission in accordance with Article 2(4) and (5), if a heavy-duty vehicle which would otherwise be exempted from the obligations laid down in Article 3a is not exempted from those obligations. PART C: AIR DRAG VALUE (CDXA) RANGES FOR THE PURPOSE OF PUBLICATION IN ACCORDANCE WITH ARTICLE 13c For the purpose of making the CdxA value specified in data entry 23 publicly available in accordance with Article 13c, the Commission shall use the ranges defined in the following table containing the corresponding range for each CdxA value: