FantasticSearch

(1) Council Directive 89/686/EEC was adopted in the context of establishing the internal market, in order to harmonise health and safety requirements for personal protective equipment (PPE) in all Member States and to remove obstacles to trade in PPE between Member States.

(2) Directive 89/686/EEC is based on the ‘new approach’ principles, as set out in the Council Resolution of 7 May 1985 on a new approach to technical harmonisation and standards . Thus, it sets only the essential requirements applying to PPE, whereas technical details are adopted by the European Committee for Standardisation (CEN) and the European Committee for Electrotechnical Standardisation (Cenelec) in accordance with Regulation (EU) No 1025/2012 of the European Parliament and of the Council . Conformity with the harmonised standards so set, the reference numbers of which are published in the Official Journal of the European Union, provides a presumption of conformity with the requirements of Directive 89/686/EEC. Experience has shown that those basic principles have worked well in that sector and should be maintained and even further promoted.

(3) Experience with the application of Directive 89/686/EEC has shown inadequacies and inconsistencies in the product coverage and conformity assessment procedures. In order to take account of that experience and to provide clarification in relation to the framework within which products covered by this Regulation may be made available on the market, certain aspects of Directive 89/686/EEC should be revised and enhanced.

(4) Since the scope, the essential health and safety requirements and conformity assessment procedures have to be identical in all the Member States there is almost no flexibility in transposing a directive based on the new approach principles into national law. Directive 89/686/EEC should therefore be replaced by a regulation, which is the appropriate legal instrument for imposing clear and detailed rules which do not give room for divergent transposition by Member States.

(5) Regulation (EC) No 765/2008 of the European Parliament and of the Council lays down rules on the accreditation of conformity assessment bodies, provides a framework for the market surveillance of products and for controls on products from third countries, and lays down the general principles of the CE marking.

(6) Decision No 768/2008/EC of the European Parliament and of the Council lays down common principles and reference provisions intended to apply across sectoral legislation. In order to ensure consistency with other sectoral product legislation, it is appropriate to align certain provisions of this Regulation to that Decision, in so far as sectoral specificities do not require a different solution. Therefore, certain definitions, the general obligations of economic operators, the presumption of conformity, EU declaration of conformity, rules on CE marking, requirements for conformity assessment bodies and notification procedures, the conformity assessment procedures and the provisions concerning procedures to deal with PPE presenting a risk should be adapted to that Decision.

(7) Regulation (EU) No 1025/2012 provides for a procedure for objections to harmonised standards where those standards do not entirely satisfy the requirements of this Regulation.

(8) This Regulation covers PPE which is new to the Union market when it is placed on the market; that is to say it is either new PPE made by a manufacturer established in the Union or PPE, whether new or second-hand, imported from a third country.

(9) This Regulation should apply to all forms of supply, including distance selling.

(10) Some products on the market that provide a protective function to the user are excluded from the scope of Directive 89/686/EEC. In order to ensure as high a level of protection for the user of those products as for the user of PPE covered by Directive 89/686/EEC, the scope of this Regulation should include PPE for private use against heat, in line with similar PPE for professional use which is already covered by Directive 89/686/EEC. Artisanal decorative products do not claim to fulfil a protective function, are by definition not personal protective equipment and are therefore not concerned by that inclusion. Clothing intended for private use with reflective or fluorescent elements included for reasons of design or decoration is not personal protective equipment and is therefore not covered by this Regulation. As for products intended for private use to protect against atmospheric conditions that are not of an extreme nature or to protect against damp and water, including but not limited to seasonal clothing, umbrellas and dishwashing gloves, those should also fall outside of the scope of this Regulation. It is also appropriate to clarify the list of excluded PPE set out in Annex I to Directive 89/686/EEC by adding a reference to products covered by other legislation and therefore excluded from the scope of this Regulation.

(11) Economic operators should be responsible for the compliance of PPE with the requirements of this Regulation, in relation to their respective roles in the supply chain, so as to ensure a high level of protection of public interests, such as health and safety, and the protection of users, and to guarantee fair competition on the Union market.

(12) All economic operators intervening in the supply and distribution chain should take appropriate measures to ensure that they make available on the market only PPE which is in conformity with this Regulation. This Regulation should provide a clear and proportionate distribution of obligations which correspond to the role of each economic operator in the supply and distribution chain.

(13) In order to facilitate communication between economic operators, national market surveillance authorities and consumers, Member States should encourage economic operators to include a website address in addition to the postal address.

(14) The manufacturer, having detailed knowledge of the design and production process, is best placed to carry out the conformity assessment procedure. Conformity assessment should therefore remain solely the obligation of the manufacturer.

(15) It is necessary to ensure that PPE from third countries entering the Union market complies with the requirements of this Regulation and, in particular, that appropriate conformity assessment procedures have been carried out by manufacturers. Provision should therefore be made for importers to make sure that PPE they place on the market complies with the requirements of this Regulation and that they do not place on the market PPE which does not comply with such requirements or which present a risk. Provision should also be made for importers to make sure that the conformity assessment procedures have been carried out and that the CE marking and technical documentation drawn up by manufacturers are available for inspection by the competent national authorities.

(16) The distributor makes PPE available on the market after it has been placed on the market by the manufacturer or the importer and should act with due care to ensure that its handling of PPE does not adversely affect the compliance of the PPE.

(17) When placing PPE on the market, every importer should indicate on the PPE his name, registered trade name or registered trade mark and the postal address at which he can be contacted. Exceptions should be provided for in cases where the size or nature of the PPE does not allow it. This includes cases where the importer would have to open the packaging to put his name and address on the PPE.

(18) Efforts should be made by economic operators to ensure that all relevant documentation, such as the user's instructions, whilst ensuring precise and comprehensible information, are easily understandable, take into account technological developments and changes to end-user behaviour, and are as up to date as possible. When PPE is made available on the market in packages containing multiple units, the instructions and information should accompany each smallest commercially available unit.

(19) Any economic operator who either places PPE on the market under his own name or trademark or modifies a product in such a way that compliance with the requirements of this Regulation may be affected should be considered to be the manufacturer and should assume the obligations of the manufacturer.

(20) Distributors and importers, being close to the market place, should be involved in market surveillance tasks carried out by the competent national authorities, and should be prepared to participate actively, providing those authorities with all necessary information relating to the PPE concerned.

(21) Ensuring traceability of PPE throughout the whole supply chain helps to make market surveillance simpler and more efficient. An efficient traceability system facilitates the market surveillance authorities' task of tracing economic operators who made non-compliant PPE available on the market. When keeping the information required under this Regulation for the identification of other economic operators, economic operators should not be required to update such information in respect of other economic operators who have either supplied them with PPE or to whom they have supplied PPE.

(22) In order to simplify and adapt certain essential safety requirements of Directive 89/686/EEC to the current practice, the requirement to label PPE protecting against harmful noise with a comfort index should be removed as experience has shown that it is not possible to measure and establish such an index. As regards mechanical vibrations, it is appropriate to remove the requirement not to exceed the limit values set by Union legislation on the exposure of workers to vibrations since the use of PPE alone is not able to achieve this objective. As regards PPE protecting against radiation, it is no longer necessary to require that the instructions for use supplied by the manufacturer indicate transmission curves, since the indication of the protection factor is more useful and is sufficient for the user.