FantasticSearch

INFORMATION DOCUMENT FOR EC VEHICLE TYPE-APPROVAL in accordance with Annex I to Council Directive 70/156/EEC () relating to EC type-approval of a vehicle with regard to its reusability, recyclability and recoverability The following information, if applicable, must be supplied in triplicate and include a list of contents. Any drawings must be supplied in appropriate scale and in sufficient detail on size A4 or on a folder of A4 format. Photographs, if any, must show sufficient detail.

0. GENERAL 0.1. Make (trade name of manufacturer):… 0.2. Type:… 0.2.0.1. Chassis:… 0.2.1. Commercial name(s) (if available):… 0.3. Means of identification of type, if marked on the vehicle (b):… 0.3.1. Location of that marking:… 0.4. Category of vehicle (c):… 0.5. Name and address of manufacturer:… 0.8. Address(es) of assembly plant(s):… 1. GENERAL CONSTRUCTION CHARACTERISTICS OF THE VEHICLE 1.1. Photographs and/or drawings of a representative vehicle:… 1.2. Dimensional drawing of the whole vehicle:… 1.3. Number of axles and wheels:… 1.3.1. Number and position of axles with double wheels:… 1.3.3. Powered axles (number, position, interconnection):…

1.7. Driving cab (forward control or bonneted)(z):… 3. POWER PLANT (q) (In the case of a vehicle that can run either on petrol, diesel, etc., or also in combination with another fuel, items shall be repeated (+)) 3.1. Manufacturer:… 3.2. Internal combustion engine 3.2.1. Specific engine information 3.2.1.1. Working principle: positive ignition/compression ignition, four-stroke/two stroke 3.2.1.2. Number and arrangement of cylinders:… 3.2.1.3. Engine capacity (s):…cm3 3.2.2. Fuel: diesel oil/petrol/LPG/NG/ethanol: 4. TRANSMISSION (v) 4.2. Type (mechanical, hydraulic, electric, etc.):… 4.5. Gearbox 4.5.1. Type (manual/automatic/CVT (continuously variable transmission)) 4.9. Differential lock: yes/no/optional 9. BODYWORK 9.1. Type of bodywork:… 9.3.1. Door configuration and number of doors:… 9.10.3. Seats 9.10.3.1. Number:… 15. REUSABILITY, RECYCLABILITY and RECOVERABILITY 15.1. Version to which the reference vehicle belongs:…

15.2. Mass of the reference vehicle with bodywork or mass of the chassis with cab, without bodywork and/or coupling device if the manufacturer does not fit the bodywork and/or coupling device (including liquids, tools, spare wheel, if fitted) without driver:… 15.3. Masses of materials of the reference vehicle 15.3.1. Mass of material taken into account at the pre-treatment step (##):… 15.3.2. Mass of material taken into account at the dismantling step (##):… 15.3.3. Mass of material taken into account at the non-metallic residue treatment step, considered as recyclable (##): 15.3.4. Mass of material taken into account at the non-metallic residue treatment step, considered as energy recoverable (##):… 15.3.5. Materials breakdown (##):… 15.3.6. Total mass of materials, which are reusable and/or recyclable:… 15.3.7. Total mass of materials, which are reusable and/or recoverable:… 15.4. Rates 15.4.1. Recyclability rate ‘Rcyc ( %)’:… 15.4.2. Recoverability rate ‘Rcov ( %)’:…