Explore European Union Legislation by Asking a Legal Question
assisted-checkbox
filter-instruction-1
positive-filters
negative-filters
act-filter tabs-all
parameters-title
query
assisted-checkbox: ✅
result-title
total 3
Regulation (EU) No 168/2013 of the European Parliament and of the Council of 15 January 2013 on the approval and market surveillance of two- or three-wheel vehicles and quadricycles Text with EEA relevance article 33 CELEX: 02013R0168-20241127 Conformity of production arrangements
1. An approval authority which grants an EU type-approval shall take the necessary measures to verify, if necessary in cooperation with the approval authorities of the other Member States, that adequate arrangements have been made to ensure that the vehicles, systems, components or separate technical units in production will conform to the approved type. 2. An approval authority which grants a whole-vehicle type-approval shall take the necessary measures to verify that certificates of conformity issued by the manufacturer conform to Article 38. To that end, the approval authority shall verify that a sufficient number of samples of certificates of conformity conform to Article 38 and that the manufacturer has made adequate arrangements to ensure that the data in the certificates of conformity are correct. |
Regulation (EU) No 168/2013 of the European Parliament and of the Council of 15 January 2013 on the approval and market surveillance of two- or three-wheel vehicles and quadricycles Text with EEA relevance article 33 CELEX: 02013R0168-20241127 3. An approval authority which has granted an EU type-approval shall take the necessary measures in relation to that approval to verify, if necessary in cooperation with the approval authorities of the other Member States, that the arrangements referred to in paragraphs 1 and 2 continue to be adequate so that vehicles, systems, components or separate technical units in production will continue to conform to the approved type and certificates of conformity continue to comply with Article 38. 4. In order to verify that a vehicle, system, component or separate technical unit conforms to the approved type, the approval authority which has granted the EU type-approval may carry out any of the checks or tests required for EU type-approval, on samples taken at the premises of the manufacturer, including production facilities. |
Regulation (EU) No 168/2013 of the European Parliament and of the Council of 15 January 2013 on the approval and market surveillance of two- or three-wheel vehicles and quadricycles Text with EEA relevance article 33 CELEX: 02013R0168-20241127 5. When an approval authority which has granted an EU type-approval establishes that the arrangements referred to in paragraphs 1 and 2 are not being applied, deviate significantly from the arrangements and control plans agreed, have ceased to be applied or are no longer considered to be adequate, even though production is continued, it shall take the necessary measures to ensure that the procedure for conformity of production is followed correctly or shall withdraw the type-approval. 6. The Commission shall be empowered to adopt delegated acts in accordance with Article 75 concerning the detailed arrangements with regard to conformity of production. The first such delegated acts shall be adopted by 31 December 2014. |