FantasticSearch

(1) Directive 2009/23/EC of the European Parliament and of the Council of 23 April 2009 on non-automatic weighing instruments has been substantially amended . Since further amendments are to be made, that Directive should be recast in the interests of clarity.

(2) Regulation (EC) No 765/2008 of the European Parliament and of the Council of 9 July 2008 setting out the requirements for accreditation and market surveillance relating to the marketing of products lays down rules on the accreditation of conformity assessment bodies, provides a framework for the market surveillance of products and for controls on products from third countries, and lays down the general principles of the CE marking.

(3) Decision No 768/2008/EC of the European Parliament and of the Council of 9 July 2008 on a common framework for the marketing of products lays down common principles and reference provisions intended to apply across sectoral legislation in order to provide a coherent basis for revision or recasts of that legislation. Directive 2009/23/EC should therefore be adapted to that Decision.

(8) All economic operators intervening in the supply and distribution chain should take appropriate measures to ensure that they only make available on the market non-automatic weighing instruments which are in conformity with this Directive. It is necessary to provide for a clear and proportionate distribution of obligations which correspond to the role of each economic operator in the supply and distribution chain.

(9) In order to facilitate communication between economic operators, market surveillance authorities and end-users, Member States should encourage economic operators to include a website address in addition to the postal address.

(10) The manufacturer, having detailed knowledge of the design and production process, is best placed to carry out the conformity assessment procedure. Conformity assessment should therefore remain solely the obligation of the manufacturer.

(11) It is necessary to ensure that non-automatic weighing instruments from third countries entering the Union market comply with this Directive, and in particular that appropriate conformity assessment procedures have been carried out by manufacturers with regard to those non-automatic weighing instruments. Provision should therefore be made for importers to make sure that the non-automatic weighing instruments they place on the market comply with the requirements of this Directive and that they do not place on the market non-automatic weighing instruments which do not comply with such requirements or present a risk. Provision should also be made for importers to make sure that conformity assessment procedures have been carried out and that marking of non-automatic weighing instruments and documentation drawn up by manufacturers are available for inspection by the competent national authorities.

(12) When placing a non-automatic weighing instrument on the market, every importer should indicate on the non-automatic weighing instrument his name, registered trade name or registered trade mark and the postal address at which he can be contacted. Exceptions should be provided, including for cases where the importer should have to open the packaging only for the purpose of putting his name and address on the instrument.

(13) The distributor makes a non-automatic weighing instrument available on the market after it has been placed on the market by the manufacturer or the importer and should act with due care to ensure that its handling of the non-automatic weighing instrument does not adversely affect the compliance of that instrument.

(14) Any economic operator that either places a non-automatic weighing instrument on the market under his own name or trade mark or modifies a non-automatic weighing instrument in such a way that compliance with this Directive may be affected should be considered to be the manufacturer and should assume the obligations of the manufacturer.

(15) Distributors and importers, being close to the market place, should be involved in market surveillance tasks carried out by the competent national authorities, and should be prepared to participate actively, providing those authorities with all necessary information relating to the non-automatic weighing instrument concerned.

(16) Ensuring traceability of a non-automatic weighing instrument throughout the whole supply chain helps to make market surveillance simpler and more efficient. An efficient traceability system facilitates market surveillance authorities’ task of tracing economic operators who made non-compliant non-automatic weighing instruments available on the market. When keeping the information required under this Directive for the identification of other economic operators, economic operators should not be required to update such information in respect of other economic operators who have either supplied them with a non-automatic weighing instrument or to whom they have supplied a non-automatic weighing instrument.

(17) This Directive should be limited to the expression of the essential requirements as regards metrology and performance in relation to non-automatic weighing instruments. In order to facilitate conformity assessment with those essential requirements as regards metrology and performance, it is necessary to provide for a presumption of conformity for non-automatic weighing instruments which are in conformity with harmonised standards that are adopted in accordance with Regulation (EU) No 1025/2012 of the European Parliament and of the Council of 25 October 2012 on European Standardisation for the purpose of expressing detailed technical specifications of those requirements, in particular as to the metrological, design and construction characteristics.

(18) Regulation (EU) No 1025/2012 provides for a procedure for objections to harmonised standards where those standards do not entirely satisfy the requirements of this Directive.

(19) Assessment of conformity with the relevant metrological and technical provisions is necessary to provide effective protection for users and third parties.

(20) In order to enable economic operators to demonstrate and the competent authorities to ensure that non-automatic weighing instruments made available on the market conform to the essential requirements, it is necessary to provide for conformity assessment procedures. Decision No 768/2008/EC establishes modules for conformity assessment procedures, which include procedures from the least to the most stringent, in proportion to the level of risk involved and the level of safety required. In order to ensure inter-sectoral coherence and to avoid ad-hoc variants, conformity assessment procedures should be chosen from among those modules.

(21) Manufacturers should draw up an EU declaration of conformity to provide information required under this Directive on the conformity of a non-automatic weighing instrument with the requirements of this Directive and of other relevant Union harmonisation legislation.

(22) To ensure effective access to information for market surveillance purposes, the information required to identify all applicable Union acts should be available in a single EU declaration of conformity. In order to reduce the administrative burden on economic operators, that single EU declaration of conformity may be a dossier made up of relevant individual declarations of conformity.

(23) The CE marking and the supplementary metrology marking, indicating the conformity of a non-automatic weighing instrument, are the visible consequence of a whole process comprising conformity assessment in a broad sense. General principles governing the CE marking and its relationship to other markings are set out in Regulation (EC) No 765/2008. Rules governing the affixing of the CE marking and the supplementary metrology marking should be laid down in this Directive.

(24) The conformity assessment procedures set out in this Directive require the intervention of conformity assessment bodies, which are notified by the Member States to the Commission.

(25) Experience has shown that the criteria set out in Directive 2009/23/EC that conformity assessment bodies have to fulfil to be notified to the Commission are not sufficient to ensure a uniformly high level of performance of notified bodies throughout the Union. It is, however, essential that all notified bodies perform their functions to the same level and under conditions of fair competition. That requires the setting of obligatory requirements for conformity assessment bodies wishing to be notified in order to provide conformity assessment services.

(26) If a conformity assessment body demonstrates conformity with the criteria laid down in harmonised standards, it should be presumed to comply with the corresponding requirements set out in this Directive.

(27) In order to ensure a consistent level of conformity assessment quality, it is also necessary to set requirements for notifying authorities and other bodies involved in the assessment, notification and monitoring of notified bodies.

(28) The system set out in this Directive should be complemented by the accreditation system provided for in Regulation (EC) No 765/2008. Since accreditation is an essential means of verifying the competence of conformity assessment bodies, it should also be used for the purposes of notification.

(29) Transparent accreditation as provided for in Regulation (EC) No 765/2008, ensuring the necessary level of confidence in certificates of conformity, should be considered by the national public authorities throughout the Union as the preferred means of demonstrating the technical competence of conformity assessment bodies. However, national authorities may consider that they possess the appropriate means of carrying out that evaluation themselves. In such cases, in order to ensure the appropriate level of credibility of evaluations carried out by other national authorities, they should provide the Commission and the other Member States with the necessary documentary evidence demonstrating the compliance of the conformity assessment bodies evaluated with the relevant regulatory requirements.