FantasticSearch | E-commerce Search Demo

Scroll to: Top Results

E-commerce Search Demo

AI Assisted Filters

Positive filters:

Negative filters:

Category filter:

Parameters

Query:

Positive filters:

Negative filters:

Category filters: All

AI Assist: ON

Page: 1

Products

Time taken: 3 Max score: 1000.000 Total hits: 600 Full time: 0.0 s
Showing 1-10 of 600 products

B000NW44XE Availability: Currently unavailable Score: 1000.000 Category: Tools Rating: 3.4 Votes: 10 Find similar products DELTA BC50 Biesemeyer Commercial Table Saw Fence System. Amazon.com The DELTA BC50 Left Handed Biesemeyer Commercial Table Saw Fence System can be used with almost any table saw. The fence is 42 inches long and 2-1/2 inches high. The fence body is easy gliding and can handle cut-off work, precision ripping, and squaring cuts. Made of 9-ply Finland birch and high-impact laminates, the fence system is strong enough for commercial use. It has a three-point locking system, as well as a hairline pointer with built-in steel tape. The Fence System includes a T-square fence, front and rear guide rails, front guide tube, and mounting hardware. From the Manufacturer Delta BC50 Left Handed Biesemeyer Commercial Table Saw Fence System.	B0007SXH2S Price: $595.9 Score: 17.544 Category: Tools Rating: 2.8 Votes: 17 Find similar products DELTA BC30 30 Inch Commercial Biesemeyer Table Saw Fence. Amazon.com The DELTA BC30 30-inch Commercial Biesemeyer Table Saw Fence features a three-point locking system and hairline pointer that lets you do precise table saw work to within 1/64 of an inch. This commercial 30-inch Biesemeyer Table Saw Fence can be mounted on almost any table saw. It has a built-in steel tape. The fence body glides easily and can rip to either side of the blade, making it great for repetitive cut-off work, precise ripping, and squaring cuts. It has a built-in steel tape, and is built out of nine-ply Finland birch with high-impact laminates and fit to solid steel tubing for durability. From the Manufacturer Delta BC30 30-Inch Commercial Biesemeyer Table Saw Fence.
B000EZXYWW Availability: Currently unavailable Score: 6.494 Category: Tools Rating: 5 Votes: 1 Find similar products Exaktor EX26 Table Saw Open Grid Sliding System With Guide Rails, Fence, Table Assembly, Extension Bars & Blocks. From the Manufacturer The Exaktor EX26 Sliding Table has an open grid table with 48 long guide rails that allow for crosscuts up to 36. A unique Quick Release Bracket is shipped with the sliding table. Shop built panels can be inserted between the grids in the table to provide an enclosed surface if desired. By loosening two locking levers the sliding table can be easily removed from your table saw and, with optional Back Plates, attached to your spindle shaper, router table and/or band saw. To provide solid support for your work, the sliding table travels on eight sealed bearings rolling on Stainless Steel Guide Rails. There's no trouble with paint chipping or corrosion. Front and rear adjustable Wiper Brushes keep sawdust from gathering on the bearings, saving you maintenance and down time. The sliding table comes complete with a 45 crosscut Fence, two movable Flip-up Work Stops, two telescopic Extension Bars & Blocks. One bar can be extended from the left end of the crosscut fence to support work pieces up to 84 long. The other extension bar at the front of the Sliding Table provides additional support when crosscutting panels up to 36 wide, 26 clearing the saw blade. The EX26 weighs 98 lb. and is shipped in two cartons. The EX26 can be upgraded with 74 long guide rails to cross cut up to a 60 wide panel.	B0000223LG Availability: Currently unavailable Score: 6.135 Category: Tools Rating: 4.2 Votes: 84 Find similar products Jet 708718R Band Saw Rip Fence With Resaw Guide. Product description Jet 708718r Jrf-14r Rip Fence W/resaw F/14 Bandsaw Amazon.com The costs and inaccessibility of the most popular species of wood are on the rise so it is important to get the most from each piece of stock you cut. Reduce the amount of cuttings lost by installing a Jet Tools Rip Fence Assembly with Resaw for your 14-inch band saw. The Jet Tools 708718R provides a guide for ripping stock up to 12 inches. Features positive locking slides along a 28-1/2-inch rail with low-friction plastic contact points. A sturdy painted aluminum fence includes a 6-by-1-inch diameter resaw attachment. Reduce the amount of waste for each cut. --C. Dwight Barnett.
B00WMLYQSC Price: $206.5 Score: 6.135 Category: Tools Rating: 4.4 Votes: 126 Find similar products Kreg PRS1015 Precision Router Table Fence. .	B07CK5WPHZ Availability: Currently unavailable Score: 5.952 Category: Tools Rating: 5 Votes: 1 Find similar products Folding Outfeed Table, 32-1/8 Length, 31-3/4 Width, 1 Height. Specification: Item: Folding Outfeed Table Item: Folding Outfeed Table For Use With: Industrial Cabinet Saws, Professional Cabinet Saws, Contractor Saws For Use With: Industrial Cabinet Saws, Professional Cabinet Saws, Contractor Saws Requires: ICS, PCS, CNS Requires: ICS, PCS, CNS Length: 32-1/8 Length: 32-1/8 Width: 31-3/4 Width: 31-3/4 Height: 1 Height: 1 Thickness: 1 Thickness: 1 Material: Steel Material: Steel Features: Engineered From Steel for Maximum Carrying Capacity, The Outfeed Table is Sized to Match The Width of Your Cast Iron Table and Wings, The Table is Designed for Easy Adjustability and Maximum Glide with Strategically Placed Rollers for Smooth Operation, The Folding Outfeed Table Quickly Stows for An Easy Move Features: Engineered From Steel for Maximum Carrying Capacity, The Outfeed Table is Sized to Match The Width of Your Cast Iron Table and Wings, The Table is Designed for Easy Adjustability and Maximum Glide with Strategically Placed Rollers for Smooth Operation, The Folding Outfeed Table Quickly Stows for An Easy Move Includes: (3) Roller Bars Includes: (3) Roller Bars.
B00ZTP7LA8 Price: $23.97 Score: 5.882 Category: Tools Rating: 3.8 Votes: 20 Find similar products Steelex D3702 Straight Edge Saw Guide Rail, 24. From the Manufacturer These 24-Inch Saw Guide Rails provide a wide clamping surface for a variety of front and rear hold-down clamps. Circular saw base plate rides against Saw Guide edge for perfect straight line cuts. Adjustable handles for easy positioning.	B0002ZO7A2 Price: $329.99 Score: 5.780 Category: Tools Rating: 4.6 Votes: 264 Find similar products INCRA MITER5000 Miter 5000 Table Saw Miter Gauge with Sled and Telescoping Fence. Product Description Capitalizing On A Great Idea, The Folks At Incra Have Combined Their Highly Successful Miter 3000 With The Exclusive Angle lock Indexing System With A Sled System For The Table Saw. The Sled With T-Track And Clamping Fixture Secures The Work piece As One Solid Unit For Precision Cross-Cutting At Any Angle. The Right-Hand Portion Of The Sled, Once Cut, Secures To The Right Miter Slot Of Your Table Saw By Means Of A Miter Slider And Functions As A Zero Clearance Cut-Off Table That's Perfectly Aligned With The Main Sled. Since This System Includes Precision Angle Adjustment, Stop Positioner And Clamping Sled For Superior Work piece Control, All Possibility For Cutting Error Has Been Eliminated And Each Cut Is Predictable And Precise. Finally, A Perfect Cross-Cutting System For Your Table Saw. Specifications: , Angle Lock:364 Angle Stops , Indexed Stops: Every 1/2 Degree Over + Or - 90 Degree Range , Special Stops:22-1/2 Degrees & 67-1/2 Degrees , Miter Head: Standard Plus Micro Plate , Glide lock Miter Bar: Width Is Adjustable In 10 Places , 36-64 telescoping Incra-Lock Flip Stop Fence, Incra; Incremental Flip Shop stop Positioner Order The Replacement Panel (H3602) For Maintaining Zero Clearance For Different Blades And Compound Angle Cutting. Amazon.com The Miter 5000 Table Saw Miter Gauge blends the incremental angle control features of the Miter 3000SE with a very special 3-panel Sled for the ultimate miter cutting workstation for the table saw. The sled with two aluminum T-tracks and clamping fixture secures the work piece as one solid unit for precision cross-cutting at any angle. The tracks are embedded in the MDF panel top to secure an included work piece hold-down clamp and to provide absolute rigid support for the 36- to 64-inch telescoping IncraLOCK Cut-off Fence. The right-hand portion of the sled, once cut, secures to the right miter slot of your table saw by means of a miter slider and functions as a zero clearance cut-off table that's perfectly aligned with the main sled. Since this system includes precision angle adjustment, stop positioner and clamping sled for superior work piece control, all possibility for cutting error has been eliminated and each cut is predictable and precise. Also featured with every Miter 5000 is a simple and incredibly useful hold down clamp which locks your work piece onto the sled for maximum accuracy and the cleanest cuts possible. Ten expansion disks adjust both sides of the bar for zero side play, anti-friction travel on all table saws with standard 3/4-by-3/8-inch or near-standard miter gauge channels, including Delta, Craftsman, and imports. This means that all of Incra's incredible precision will actually show up in your work because the bar won't wiggle around in the miter slot. Also included are Special Edition Miter Fence telescopes from 18- to a full 31-inch length. The dual flip shop stop and Incra's patented automatic positioning control also come standard with this model. AngleLOCK Indexing Precision angle indexing teeth are laser cut in solid steel to lock in 364 positive angle stops in 1/2-degree increments over a full 180-degree range. Interlocking grooves in the fence and stop ensure even the sharp edge of mitered work will not push behind the stop. The fence locking bracket creates a monolithic rigid platform and fence when tightened down. Quickly set using the included standard hex tool, this feature takes an already strong platform into the rigidity level expected in any professional machining environment. Amazon.com The Miter 5000 Table Saw Miter Gauge blends the incremental angle control features of the Miter 3000SE with a very special 3-panel Sled for the ultimate miter cutting workstation for the table saw. The sled with two aluminum T-tracks and clamping fixture secures the work piece as one solid unit for precision cross-cutting at any angle. The tracks are embedded in the MDF panel top to secure an included work piece hold-down clamp and to provide absolute rigid support for the 36- to 64-inch telescoping IncraLOCK Cuto-off Fence. The right-hand portion of the sled, once cut, secures to the right miter slot of your table saw by means of a miter slider and functions as a zero clearance cut-off table that's perfectly aligned with the main sled. Since this system includes precision angle adjustment, stop positioner and clamping sled for superior work piece control, all possibility for cutting error has been eliminated and each cut is predictable and precise. Also featured with every Miter 5000 is a simple and incredibly useful hold down clamp which locks your work piece onto the sled for maximum accuracy and the cleanest cuts possible. Ten expansion disks adjust both sides of the bar for zero side play, anti-friction travel on all table saws with standard 3/4-by-3/8-inch or near-standard miter gauge channels, including Delta, Craftsman, and imports. This means that all of Incra's incredible precision will actually show up in your work because the bar won't wiggle around in the miter slot. Also included are Special Edition Miter Fence telescopes from 18- to a full 31-foot length. The dual flip shop stop and Incra's patented automatic positioning control also come standard with this model. AngleLOCK Indexing Precision angle indexing teeth are laser cut in solid steel to lock in 364 positive angle stops in 1/2-degree increments over a full 180-degree range. Interlocking grooves in the fence and stop ensure even the sharp edge of mitered work will not push behind the stop. The fence locking bracket creates a monolithic rigid platform and fence when tightened down. Quickly set using the included standard hex tool, this feature takes an already strong platform into the rigidity level expected in any professional machining environment. From the Manufacturer Capitalizing on a great idea, the folks a incra have combined their highly successful Miter3000 with the exclusive AngleLOCK Indexing System with a sled system for the table saw. The sled with T-track and clamping fixture secures the workpiece as one solid unit for precision cross-cutting at any angle. The right-hand portion of the sled, once cut, secures to the right miter slot of your table saw by means of a miter slider and functions as a zero clearance cut-off table that's perfectly aligned with the main sled. Since this system includes precision angle adjustment, stop positioner and clamping sled for superior workpiece control, all possibility for cutting error has been eliminated and each cut is predictable and precise. Finally, a perfect cross-cutting system for your table saw. Order the replacement Panel for maintaining zero clearance for different blades and compound angle cutting. Please see above for Miter3000 specifications. See more.
B00002234E Availability: Currently unavailable Score: 5.780 Category: Tools Rating: 5 Votes: 1 Find similar products Delta 36-878 5 Horsepower Unisaw with 50D Low Voltage Control. Amazon.com Among serious woodworkers who demand top quality tools in their shop, there's no debating the desirability of a Delta Unisaw. It's one of the few cabinet-style table saws still made in the USA, and the benefits show up in the quality of the tool's workmanship and finish. The Unisaw's smooth operation can be traced to the widely spaced, massive trunions which are machined from fine-grained cast iron and are completely adjustable to ensure the best possible alignment. The heavy cast-iron table adds to the saw's stability and features a 3/8-by-3/4-inch T-slot on each side of the blade. Include the two extension wings and you have a generous cast-iron table surface of 36 by 27 inches. The single-phase, 5-horsepower induction motor is housed in a dust-sealed, fan-cooled enclosure, and power is transferred smoothly and efficiently via a positive-traction three-belt V-drive system. The motor cover has handy storage slots for your miter gauge and table inserts, but more importantly, the inside is designed to maximize the airflow for dust collection and, in conjunction with the redesigned cabinet interior, funnel all the dust efficiently to the 4-inch dust port without a hitch. This model comes with a 50-inch commercial Biesemeyer fence system and accompanying table board. While the basics of this popular fence design have been copied by competing saw and fence manufacturers, there's still nothing quite like the original. The Biesemeyer is made of the heaviest gauge steel we've seen on a T-square type fence, and the fence face itself is made of laminated 9-ply Finland birch, glued solidly in place--a construction method that eliminates warpage in the fence line that the bolts or screws used in competing systems can cause. The fence locks to the front guide rail using Biesemeyer's three-point locking system and automatically aligns the fence parallel to the blade when the lever is tightened down, providing reliable accuracy every time. --Brian Trinen From the Manufacturer Delta 36-878 5 Horsepower Unisaw with 50D Low Voltage Control.	B00GGR3WPQ Price: $1365 Score: 5.714 Category: Tools Rating: 4 Votes: 23 Find similar products Van Mark Trim-A-Table 50 Series Saw Table - TAT50. Long recognized as the top selling saw table in the siding industry, Trim-A-Table carries on a rich tradition of providing installers everywhere with fast and accurate cuts that keep the job site moving right along. We know every moment spent fussing with your saw table is a moment that could've been spent hanging siding. With up to 18 feet of extension support for your materials, you can focus on cutting your rakes and gables, not flip flopping materials to keep them from falling off the end of the table. Only Trim-A-Table has a recessed saw blade track which means you never cut into the table top.