FantasticSearch | E-commerce Search Demo

Scroll to: Top Results

E-commerce Search Demo

AI Assisted Filters

Positive filters:

Negative filters:

Category filter:

Parameters

Query:

Positive filters:

Negative filters:

Category filters: All

AI Assist: ON

Page: 1

Products

Time taken: 3 Max score: 1000.000 Total hits: 600 Full time: 0.0 s
Showing 1-10 of 600 products

B0017HHM4C Availability: Currently unavailable Score: 1000.000 Category: Tools Rating: 5 Votes: 6 Find similar products PanaVise 310 Surface Plate Base Mount. Product Description PanaVise is a major manufacture of Vises and Work Holding Tools. PanaVise's Tilt, Turn & Rotate technology has been applied to the product line, allowing for maximum efficiency and many different uses! All PanaVise Products are covered by a Limited Lifetime Warranty! Introducing the Panavise 310 SURFACE PLATE BASE MOUNT, When you need a portable, stable vise! This unique Base Mount features a precision cast iron flat surface (Blanchard ground): ideal for layout work! Compatible with the 201 PV Jr. Vise, 300 and 305 Bases. Square surface: 10.75-Inch x 10.75 (273.1mm x 273.1mm). Includes four non-marring, anti-skid pads. Height: 1.25 (31.8mm), Weight: 10.0 lbs. (4.5kg). Limited Lifetime Warranty! From the Manufacturer The PanaVise 310 surface plate base mount is an effective vise mounting solution that provides dependable portable stability for a variety of PanaVise work-holding products, as well as an extended level work area for items and additional tools. The base mount is forged in a single piece of precision cast iron (Blanchard ground), measures 10-3/4 x 10-3/4 across its top surface, is 1-1/4 tall, and weighs 10 lb. Three pre-drilled holes are aligned in a triangle pattern in one of its corners. This hole pattern makes the PanaVise 310 compatible with the PanaVise 201 PV Jr. vise, the PanaVise 300 and 305 bases, and associated vise combination products. The combination of the corner orientation of this mounting position, along with the 10 lb. weight of the base provides the dependable, non-tipping stability sufficient for most small-medium sized vise applications. The slightly raised position onto four legs provides convenient gripping points for manuveuring the base, and allows flipping to add or remove compatible work-holding tools. Four non-marring, anti-skid pads are included for the bottom of the legs to prevent scratching of work surfaces. Specifications Construction: Precision cast iron flat surface (Blanchard ground) Construction: Precision cast iron flat surface (Blanchard ground) Surface dimensions: 10-3/4 x 10-3/4 (273.1 mm x 273.1 mm) Surface dimensions: 10-3/4 x 10-3/4 (273.1 mm x 273.1 mm) Height: 1-1/4 (31.8 mm) Height: 1-1/4 (31.8 mm) Weight: 10 lb. (4.5 kg) Weight: 10 lb. (4.5 kg) Pre-drilled tool mounting holes: Yes, triangular pattern Pre-drilled tool mounting holes: Yes, triangular pattern Non-marring pads included: Yes Non-marring pads included: Yes Compatibility (PanaVise models): 201 PV Jr. vise, 300 and 305 bases Compatibility (PanaVise models): 201 PV Jr. vise, 300 and 305 bases Limited Lifetime Warranty All PanaVise products are warranted against defective materials and/or workmanship to all original consumer owners from the date of original consumer purchase for the lifetime of ownership by the original consumer owner. In the event of defective materials and/or workmanship, PanaVise Products, Inc. will, without charge, repair or replace, at its option, the defective product within 60-days from the receipt of the defective product. The Warranty does not apply to damage not resulting from defective materials and/or workmanship while in the possession of the original consumer or to unreasonable use by the original consumer, which includes but is not limited to improper installation, or failure to provide reasonable and necessary maintenance. About PanaVise Founded in 1957 by tool and die maker Otto Colbert and currently headquartered in Reno, Nevada, PanaVise is a leader in work-holding products. Over the years, a natural outgrowth of this expertise has been continued development of other items which hold things securely and offer a wide range of motion. Important areas in which this has been applied include, electronics, CCTV camera mounts, and audio/video mounts, earning PanaVise the nickname the the hold it anywhere you want it company.	B000JV9IRG Price: $27.43 Score: 6.711 Category: Tools Rating: 4.4 Votes: 52 Find similar products PANAVISE 337 Fixturing Head,Grey. Product Description Fixturing Head , Bench Vise, Cast Aluminum Material, For Use With Mfg. No. 305, 300, 380, Includes (6) Slots: 7/16 W x 1-3/16 in. L, (6) 1/4 in. Bolt Holes Evenly Spaced on 4-3/8 in. Circle From the Manufacturer The PanaVise 337 is a universal fixturing head designed for small-medium vise applications involving objects with flat surfaces. Compatible with all PanaVise 300 series bases by way of its 5/8 shaft, its level 5-3/8 diameter head allows users to raise items up off of work benches, securing them through any stable combination of the six slots or six holes forged into its flat upper surface. Slots measure 7/16 (w) x 1-3/16 (l), while holes are 1/4. Both are evenly spaced around a 4-3/8 bolt circle diameter of the head. Together, this makes the PanaVise 337 suitable for any vise applications in which an object can be screwed or bolted into place. This includes everything from maintenance of small engines, to woodworking projects. Specifications Head surface diameter: 5-3/8 (136.5 mm) Head surface diameter: 5-3/8 (136.5 mm) Bolt circle diameter: 4-3/8 (111.1 mm) Bolt circle diameter: 4-3/8 (111.1 mm) Securing openings Slots: 6 - 7/16 (11.1 mm) (w) and 1-3/16 (30.2 mm) (l)Bolt holes: 6 - 1/4 (6.3 mm) Securing openings Slots: 6 - 7/16 (11.1 mm) (w) and 1-3/16 (30.2 mm) (l) Slots: 6 - 7/16 (11.1 mm) (w) and 1-3/16 (30.2 mm) (l) Bolt holes: 6 - 1/4 (6.3 mm) Bolt holes: 6 - 1/4 (6.3 mm) Shaft diameter: 5/8 Shaft diameter: 5/8 Shaft length: 4-1/8 Shaft length: 4-1/8 Height: 3-3/4 Height: 3-3/4 Weight: 11-1/2 oz Weight: 11-1/2 oz Limited Lifetime Warranty All PanaVise products are warranted against defective materials and/or workmanship to all original consumer owners from the date of original consumer purchase for the lifetime of ownership by the original consumer owner. In the event of defective materials and/or workmanship, PanaVise Products, Inc. will, without charge, repair or replace, at its option, the defective product within 60-days from the receipt of the defective product. The Warranty does not apply to damage not resulting from defective materials and/or workmanship while in the possession of the original consumer or to unreasonable use by the original consumer, which includes but is not limited to improper installation, or failure to provide reasonable and necessary maintenance. About PanaVise Founded in 1957 by tool and die maker Otto Colbert and currently headquartered in Reno, Nevada, PanaVise is a leader in work-holding products. Over the years, a natural outgrowth of this expertise has been continued development of other items which hold things securely and offer a wide range of motion. Important areas in which this has been applied include, electronics, CCTV camera mounts, and audio/video mounts, earning PanaVise the nickname the the hold it anywhere you want it company.
B000FN3TUA Price: $34.99 Score: 6.211 Category: Tools Rating: 4.3 Votes: 28 Find similar products PANAVISE 304 Low Profile Head. Product Description PanaVise is a major manufacture of Vises and Work Holding Tools. PanaVise's Tilt, Turn & Rotate technology has been applied to the product line, allowing for maximum efficiency and many different uses. Introducing the Panavise 304 Low PROFILE HEAD, popular for jewelry making, watch repair and lapidary work! This unique Head can be positioned more closely to the work surface and is perfect for use under a magnifying light. When used with a 305 Low Profile Base, you can create a very Low-profile Vise. Features steel jaws. Throat depth: 1.375-inch (34.9mm)Length: 7.75 (196.8mm), Weight: 1.4 lbs. (0.6kg). From the Manufacturer The PanaVise 304 low-profile vise head is work-holding tool head designed to maximize clear visibility of work items by bringing them as close as possible to the work bench surface. The 304 head has a lateral-oriented shaft and is compatible with all PanaVise 300 series work-holding tool bases. It ships with steel jaw pads designed to tolerate high heat environments, while supplying secure holding power. Low-profile orientation designed for detailed work. View larger. The Right Vise Head for Detailed Work The PanaVise 304 low-profile vise head is a specialized work-holding tool accessory designed for detail-oriented work such as jewelry making, watch repair and lapidary. Its shaft diameter is 5/8 (15.9 mm) which makes it compatible with the full product line of PanaVise 300 series bases. Unlike most other vise heads, the shaft of the PanaVise 304 low-profile vise head extends to the side of the vise jaws, instead of from its bottom. When used with a PanaVise 300 series base, which feature 90-degree head tilt functionality, the lateral shaft orientation enables the head to maintain a profile just above the work bench surface. This alignment brings held items closer to the user and makes it easier to position them under magnifying lights commonly used in detail-oriented work. The vise head is 7-3/4 (196.8 mm) tall, weighs 1.4 lb. (0.6 kg), with a throat depth of 1-3/8 (34.9 mm). Its jaw openings are lined with steel jaw pads, designed to securely hold items in high heat environments. Jaw pads designed for other purposes are also available for additional purchase and are swapped in using two mounting screws. Compatible with all PanaVise 300 series bases (base, base mount sold separately). View larger. Key Features Low-profile vise head suitable for detail oriented work like jewelry making, watch repair, and lapidary Low-profile vise head suitable for detail oriented work like jewelry making, watch repair, and lapidary Compatible with PanaVise 300 series bases Compatible with PanaVise 300 series bases Utilizes the adjustability of PanaVise 300 series bases to position item as close as possible to the work surface and user Utilizes the adjustability of PanaVise 300 series bases to position item as close as possible to the work surface and user Traditional outer jaw screw mechanism with sliding handle Traditional outer jaw screw mechanism with sliding handle Removable steel jaw pads designed for firmly holding objects in a high heat environment Removable steel jaw pads designed for firmly holding objects in a high heat environment Additional jaw pad replacements are available Additional jaw pad replacements are available Specifications Length: 7-3/4 (196.8 mm) Length: 7-3/4 (196.8 mm) Weight: 1.4 lb. (0.6 kg) Weight: 1.4 lb. (0.6 kg) Throat depth: 1-3/8 (34.9 mm) Throat depth: 1-3/8 (34.9 mm) Shaft diameter: 5/8 (15.9 mm) Shaft diameter: 5/8 (15.9 mm) Steel jaw pads Dimensions: 2-1/2 (63.5 mm) (w) x 1/2 (12.6 mm) (h)Heat tolerance: designed for firmly holding objects in a high heat environment Steel jaw pads Dimensions: 2-1/2 (63.5 mm) (w) x 1/2 (12.6 mm) (h) Dimensions: 2-1/2 (63.5 mm) (w) x 1/2 (12.6 mm) (h) Heat tolerance: designed for firmly holding objects in a high heat environment Heat tolerance: designed for firmly holding objects in a high heat environment What's in the Box? PanaVise 304 low-profile head PanaVise 304 low-profile head User's manual and warranty information User's manual and warranty information Limited Lifetime Warranty All PanaVise products are warranted against defective materials and/or workmanship to all original consumer owners from the date of original consumer purchase for the lifetime of ownership by the original consumer owner. In the event of defective materials and/or workmanship, PanaVise Products, Inc. will, without charge, repair or replace, at its option, the defective product within 60-days from the receipt of the defective product. The Warranty does not apply to damage not resulting from defective materials and/or workmanship while in the possession of the original consumer or to unreasonable use by the original consumer, which includes but is not limited to improper installation, or failure to provide reasonable and necessary maintenance. About PanaVise Founded in 1957 by tool and die maker Otto Colbert and currently headquartered in Reno, Nevada, PanaVise is a leader in work-holding products. Over the years, a natural outgrowth of this expertise has been continued development of other items which hold things securely and offer a wide range of motion. Important areas in which this has been applied include, Electronics, CCTV Camera Mounts, and Audio/Video Mounts, earning PanaVise the nickname the the hold it anywhere you want it company.	B00JDQA1OW Availability: Currently unavailable Score: 5.747 Category: Tools Rating: 4.6 Votes: 61 Find similar products Wilton WIL10300 Mounting Bracket (for All Terrain Vise). We see a future built on great brands, great products and great people. In every facet of our business we leverage the strengths of our global infrastructure to maximize the benefits of all three.
B0B54J119F Price: $118.23 Score: 5.682 Category: Tools Rating: 4.6 Votes: 95 Find similar products WEN Bench Vise, 6-Inch, Cast Iron with Swivel Base (BV456). Remember when your bench had a vise on it? Keep your workpieces secure with the WEN 6-Inch Bench Vise. Our crosscut non-slip 6-inch jaws open up to a spacious 6-5/8 inches, keeping your workpieces perfectly still for sawing, drilling, polishing, grinding, or whatever else you need to get done. Made from heavy duty powder-coated 36,000 PSI cast iron, the WEN Bench Vise grips tightly onto your workpieces, providing over 3700 pounds of clamping force. The swiveling base pivots over 125 degrees to meet the needs of any project, with three 12 mm mounting holes to attach to the table of your choice. Onboard 4.3 by 3.6-inch anvil provides metalworkers an aid for forging tools. And because its a WEN product, your bench vise comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line, all to make sure you remember WEN.	B006K3GQGS Availability: Currently unavailable Score: 5.650 Category: Tools Rating: 4.2 Votes: 61 Find similar products Yost Vises 936-AS 6 All-Steel Combination Pipe and Bench Vise with 360-Degree Swivel Base. The Yost Vises 936-AS 6 medium-duty all-steel combination pipe and bench vise has a 360-degree swivel base and mounts to a workbench to provide clamping action. The 360-degree swivel base adjusts the direction of the jaws for proper placement. Hand-tightening the two lock knobs on the base secures its position. The body is made of cast steel and has a black painted finish for mild corrosion protection. A flat portion on the body acts as a reinforced anvil and an additional work surface. The top jaws are made of hardened steel and can be replaced when worn, and the built-in pipe jaws are cast steel. Both the top jaws and pipe jaws are grooved for enhanced grip. The jaws draw closer together or farther apart by turning the vise handle clockwise or counterclockwise. The main screw that controls the jaws has been continuous rolled for high strength and is covered by a bar to protect it from damage. A rubber washer on either side of the handle prevents unwanted sliding when turning, and the balls on each end unscrew to enable replacement of the handle if worn. The base has three 0.56-diameter holes for mounting hardware (not included). Specifications Jaw width (nominal)6Jaw opening (nominal)5Throat depth (nominal)2-5/8Pipe capacity1/2 to 1-1/2Overall dimensions6 x 7 x 16 inches (H x W x D)Weight29 lb. H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Vises use the clamping action of jaws to hold a workpiece in place for applications such as drilling and sawing. Vise styles are categorized by how the device is mounted. For example, bench vises mount to a benchtop; drill press vises bolt to a drill press; and woodworking vises fit underneath, on top, or to the side of a workbench. A vise's jaw opening and throat depth should be large enough for the workpiece. Yost Vises manufactures a wide range of vises, including bench-mount, woodworking, and drill-press styles. The company, founded in 1908, is headquartered in Holland, MI.
B07F3B74WN Availability: Currently unavailable Score: 5.556 Category: Tools Rating: 3.7 Votes: 10 Find similar products Machine Vise,6 inch Cross Slide Drill Press Vise Heavy Duty Metal Milling Vice Holder Clamping Bench Mount. .	B0000DD4I7 Availability: Currently unavailable Score: 5.464 Category: Tools Rating: 3.1 Votes: 3 Find similar products Grizzly G5749 Dril Length Press Vise, 2-1/2-Inch. If you use a drill press and value your fingers, you need one of these. Made from high-grade cast iron, these hefty horizontal vises offer support and stability, allowing you to keep your hands well away from fast moving bits and cutters. Includes a sturdy lip along both sides of the base, allowing vise to be mounted to nearly any machine table, using common T-slot clamps. Specifications: Jaw size: 2-5/8 W x 13/16 D Max jaw opening: 2 Height: 2 Base size: 5-1/8 x 5 Slot size: 7/16 Slot spacing: 4 Weight: 2.9 lbs.
B01N6N7HR9 Price: $99.95 Score: 5.464 Category: Tools Rating: 4.7 Votes: 3 Find similar products 3 Screwless Vise with Hold Down Clamps - Height Adjustable Clamps, LittleMachineShop.com (3767). This high precision toolmakers screwless vise has a one-piece body. The body and jaws are hardened to Rc 58-62. All sides are flat, square and parallel to 0.0002. There are horizontal and vertical vees on the inside face of the movable jaw to hold round objects.The jaws are 1.38 deep and open to 3.78 capacity.The vise is 7.28 long, 2.76 tall and 3.00 wide.The pair of clamps is used to mount the screwless vise on your mill table. You furnish 3/8 socket head cap screws of the appropriate length for your mill, and T-slot nuts. These clamps are height-adjustable so they will work with any screwless vise with 8 mm (5/16) or larger holes. You can also use these clamps in the slots that are in the end of most screwless vises.	B00068U7X6 Availability: Currently unavailable Score: 5.405 Category: Tools Rating: 4.6 Votes: 3 Find similar products Palmgren Arbor press, 2 ton. Product Description The Palmgren 2 ton Arbor Press Delivers the heavy force needed for riveting, squeezing, punching, bending, and other pressing applications. Removable machined steel anvil provides accurate work support in four slot positions. Depth stop securely clamps to the ram and withstands full pressure. A lockable fine adjustment adjusting screw accurately limits the depth of the ram stroke. The rugged steel ram is driven by a machined piston and dimensions are 1 ¼ x 1 ¼ inches. Punches or tools may be added to the end of the ram with the aid of a magnetic insert. The ram is reversible with one end solid and the other end with a hole and magnet to hold bits and tools. Sturdy cast-iron construction allows for the rugged strength needed for tougher jobs. The base is pre-drilled for mounting on either a bench or pedestal, and it is also machined to hold the included three bit set. The bit set includes one pointed bit, one round bit, and one square end bit along with a removable steel anvil. The removable anvil has a diameter of 6 ¾ inches. From the Manufacturer Palmgren's 12801 is an incredibly tough vise for tight-clearance applications. Low overall height and four mounting slots provide tool clearance and firm mounting on most machines. Vise has replaceable steel jaw plates. Fixed jaw plate is grooved horizontally and vertically for hold round stock. This vise has a precision ground guide bar for smooth, accurate travel and clamping.