FantasticSearch | E-commerce Search Demo

Scroll to: Top Results

E-commerce Search Demo

AI Assisted Filters

Positive filters:

Negative filters:

Category filter:

Parameters

Query:

Positive filters:

Negative filters:

Category filters: All

AI Assist: ON

Page: 1

Products

Time taken: 3 Max score: 1000.000 Total hits: 600 Full time: 0.0 s
Showing 1-10 of 600 products

B001VEJE7Y Availability: Currently unavailable Score: 1000.000 Category: Tools Rating: 5 Votes: 3 Find similar products Carter Products 50009306 1/2-Inch-by-93-1/2-Inch AccuRight Bandsaw Blade. From the Manufacturer AccuRight band saw blades are designed specifically to help you work faster, and with greater accuracy. AccuRight sets new standards for durability; smooth, straight cuts; and the ability to shape precise contours. AccuRight blades work well in a wide range of material; hardwoods, softwoods, and some plastics. They feature a milled tooth, hard-edge flex back design and are available in sizes to fit almost all bandsaws on the market today, from home craftsman to industrial models. Select the blade based on type of cut needed. Thickness of material dictates TPI (Tooth Per Inch) requirements. The general rule of thumb is to use a blade with enough TPI to have at least 3 to 6 teeth in the material when cutting, but no more than 12 and no less than 3. EX: 1-Inch thick stock should use a 6 or 10 TPI. 3 TPI and less would give too rough a cut and could cause chipping in some woods. 14 TPI and higher would not remove sawdust adequately and thus would burn as it cuts, increasing the heat in the blade and reducing its useful life. Type of Cut determines blade width; i.e. the tighter the radius to the curve the smaller the blade needs to be. 1/8-Inch and below Best for tight radius scroll work (excellent choice for thin material when used with the Carter Stabilizer) 3/16-Inch to 3/8-Inch Cutting curves and light resaw with smaller saws (12-Inch) 3/16-Inch to 1/4-Inch excellent with Carter Stabilizer. 1/2-Inch to 1-Inch Resaw and large contours (most 14-Inch saws will only be able to tension a 1/2-Inch with just the stock spring so we recommend a Carter Cobra Coil to anyone with a 14-Inch saw ordering 1/2-Inch or larger blades. Blade length can be determined be looking in your saws user manual or on the saw itself. Most commercially available 14-Inch saws use 93-1/2-Inch standard blades or 105-Inch for saws with the riser block installed. Please confirm your blade size before ordering.	B006QXRF30 Availability: Currently unavailable Score: 10.000 Category: Tools Rating: 3 Votes: 1 Find similar products Magnate M72C18R14 Carbon Steel Bandsaw Blade, 72 Long - 1/8 Width, 14 Raker Tooth. Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal ( i.e. aluminum, copper and brass ) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel ( don't cut hard steel ), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 24 raker to cut 1/16 to 1/4 thick material, * 18 raker to cut 1/8 to 3/8 thick material,* 14 raker to cut 3/16 to 7/16 thick material,* 10 raker to cut 1/4 to 5/8 thick material,* 6 Hook to cut 3/8 to 2 thick material,* 4 Hook to cut 3/4 to 4-1/2 thick material,* 3 Hook to cut 1 to 6 thick material,* 2 Hook to cut 2 to 12 thick material. All Magnate bandsaw blades are welded and fabricated in the USA. The coils/material are USA brands but may not be made in the USA. All band saw blades’ pictures depict a general bandsaw blade and thus may look different from each particular item. Warning: For packaging purposes, this blade is folded into a coiled position which is similar to a spring and may pop open when being coiled or uncoiled. Wear heavy duty leather gloves and eye/body protection while using extreme care when coiling or uncoiling a blade. Failure to exercise the proper care could result in serious bodily injury. See your bandsaw owner's manual for further safety instructions. Please refer to your owner's/operation manual to make sure the blade's length, width and thickness can fit your bandsaw machine.
B0011WMF5O Price: $12.53 Score: 9.804 Category: Tools Rating: 5 Votes: 4 Find similar products Magnate M103C14H4 Carbon Steel Bandsaw Blade, 103 Long - 1/4 Width, 4 Hook Tooth. Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal ( i.e. aluminum, copper and brass ) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel ( don't cut hard steel ), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 24 raker to cut 1/16 to 1/4 thick material, * 18 raker to cut 1/8 to 3/8 thick material,* 14 raker to cut 3/16 to 7/16 thick material,* 10 raker to cut 1/4 to 5/8 thick material,* 6 Hook to cut 3/8 to 2 thick material,* 4 Hook to cut 3/4 to 4-1/2 thick material,* 3 Hook to cut 1 to 6 thick material,* 2 Hook to cut 2 to 12 thick material. All Magnate bandsaw blades are welded and fabricated in the USA. The coils/material are USA brands but may not be made in the USA. All band saw blades’ pictures depict a general bandsaw blade and thus may look different from each particular item. Warning: For packaging purposes, this blade is folded into a coiled position which is similar to a spring and may pop open when being coiled or uncoiled. Wear heavy duty leather gloves and eye/body protection while using extreme care when coiling or uncoiling a blade. Failure to exercise the proper care could result in serious bodily injury. See your bandsaw owner's manual for further safety instructions. Please refer to your owner's/operation manual to make sure the blade's length, width and thickness can fit your bandsaw machine.	B004DHKFWE Price: $18.57 Score: 9.804 Category: Tools Rating: 5 Votes: 1 Find similar products Magnate M112C34H3 Carbon Steel Bandsaw Blade, 112 Long - 3/4 Width, 3 Hook Tooth. Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal ( i.e. aluminum, copper and brass ) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel ( don't cut hard steel ), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 24 raker to cut 1/16 to 1/4 thick material, * 18 raker to cut 1/8 to 3/8 thick material,* 14 raker to cut 3/16 to 7/16 thick material,* 10 raker to cut 1/4 to 5/8 thick material,* 6 Hook to cut 3/8 to 2 thick material,* 4 Hook to cut 3/4 to 4-1/2 thick material,* 3 Hook to cut 1 to 6 thick material,* 2 Hook to cut 2 to 12 thick material. All Magnate bandsaw blades are welded and fabricated in the USA. The coils/material are USA brands but may not be made in the USA. All band saw blades’ pictures depict a general bandsaw blade and thus may look different from each particular item. Warning: For packaging purposes, this blade is folded into a coiled position which is similar to a spring and may pop open when being coiled or uncoiled. Wear heavy duty leather gloves and eye/body protection while using extreme care when coiling or uncoiling a blade. Failure to exercise the proper care could result in serious bodily injury. See your bandsaw owner's manual for further safety instructions. Please refer to your owner's/operation manual to make sure the blade's length, width and thickness can fit your bandsaw machine.
B000R8INQ8 Price: $20.07 Score: 9.804 Category: Tools Rating: 5 Votes: 1 Find similar products Magnate M123C34H4 Carbon Steel Bandsaw Blade, 123 Long - 3/4 Width, 4 Hook Tooth. Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal ( i.e. aluminum, copper and brass ) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel ( don't cut hard steel ), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 24 raker to cut 1/16 to 1/4 thick material, * 18 raker to cut 1/8 to 3/8 thick material,* 14 raker to cut 3/16 to 7/16 thick material,* 10 raker to cut 1/4 to 5/8 thick material,* 6 Hook to cut 3/8 to 2 thick material,* 4 Hook to cut 3/4 to 4-1/2 thick material,* 3 Hook to cut 1 to 6 thick material,* 2 Hook to cut 2 to 12 thick material. All Magnate bandsaw blades are welded and fabricated in the USA. The coils/material are USA brands but may not be made in the USA. All band saw blades’ pictures depict a general bandsaw blade and thus may look different from each particular item. Warning: For packaging purposes, this blade is folded into a coiled position which is similar to a spring and may pop open when being coiled or uncoiled. Wear heavy duty leather gloves and eye/body protection while using extreme care when coiling or uncoiling a blade. Failure to exercise the proper care could result in serious bodily injury. See your bandsaw owner's manual for further safety instructions. Please refer to your owner's/operation manual to make sure the blade's length, width and thickness can fit your bandsaw machine.	B0096TPOMU Price: $36.29 Score: 9.804 Category: Tools Rating: 5 Votes: 3 Find similar products Timber Wolf Bandsaw Blade 137 x 1/4 x 6 TPI x .025 Thickness. Blade Specificaitons: 137 x 1/4 x 6TPI x .025, .042 kerf; 6.5 degree tooth angle; 5/8 cut radius. Cutting Applications: curve, template and pattern cutting or ripping and crosscutting. Timber Wolf PC (Positive Claw) tooth-style blades are primarily used in kiln dry wood applications. They feature the great finish of a skip tooth blade at sixty percent of the feed speed capabilities of a hook tooth blade. The PCs gullet shape and depth increase sawdust removal and cutting speed, while the milled teeth help to reduce consumption of horsepower. The PC also features Timber Wolfs unique 6.5-degree rake angle and special 5-tooth set pattern. All of this means you get a long-lasting cutting blade that glides through the wood and produces an excellent finish. Available in 3/16 to 1 widths and 2, 3, 4 and 6 TPI. Suffolk Machinery Corporation, the maker of Timber Wolf band saw blades, manufactures some of the finest woodworking, metal cutting and saw mill blades in the world. They are made from premium Swedish silicon steel and the highest quality alloys. The blade teeth are milled into a piece of strip steel to produce a finished, razor sharp edge without having to stamp or grind the teeth. Finally, the blades are induction hardened, which allows for more precise hardness throughout the blade. The result is a blade with the perfect balance of steel, width, and thickness, with precision set teeth. What this means for you is a superior cutting blade engineered for exceptional performance and long production life. Made in the USA.
B001J8L80S Availability: Currently unavailable Score: 9.804 Category: Tools Rating: 5 Votes: 1 Find similar products SuperCut B92.5G12H3 Carbide Impregnated Bandsaw Blade, 92-1/2 Long - 1/2 Width; 3 Hook Tooth. This premium blade was designed with the professional and serious woodworker in mind. It is truly a unique blade featuring many new advances in blade design. Made from the toughest alloys, the teeth are precision ground and razor sharp, not punched or milled like traditional blades. During the manufacture of this blade, the teeth are impregnated with Carbide particles which greatly improve the cutting life of the blade. The teeth also feature a new aggressive tooth design and set. The sides of the blade are polished smooth and the back of the blade is rounded to allow it to feed and turn with less heat and chatter. This blade is manufactured to the industry's highest standards. No less than 30 inspections and tests insure this is the best blade for the discriminating woodworker. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed: 92-1/2 inch ( 7 ft. 8-1/2 inch, 7' 8-1/2 ) bandsaw blades suit the following models: Jet J-8203K; Powerline Mark 1; Shopcraft 28-283F; ; MIT 5125; American Industrial AMT 4113; Enco 505-1372 (models 8201, 8203, 8201VS and 8203VS), 199-9013, 199-9011, 199-9001; Dayton 3Z981; Central Machinery 32206-OCEA, 32208-OCEA, 5687-OCEA, 2146-3BMF, 00580-OCEA; Nu-Mark 14; United 14; Wilton Tradesman 8201, 8203, 8201VS, 8203VS; Grizzly G0580X; G0555X (92-1/2 to 93-1/2); 14 Ohio Forge; Builders Square; Delco 14; Duracraft 14; Buffalo 14; If in doubt, to determine bandsaw blade length: 1 - Check the owner's manual of your bandsaw machine for specifications - not only the length, but also the range of the width and thickness.2 - If the owner's manual is not available, refer to previous invoices.3 - Cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. This method will provide the most possible accurate length.4 - Upon requested, Magnate makes blades of any length and types to fit your brand and model.	B001J8LUP6 Price: $11.91 Score: 9.615 Category: Tools Rating: 4.6 Votes: 23 Find similar products SuperCut B56.875W38R24 Three Wheeler Bandsaw Blade, 56-7/8 Long - 3/8 Width, 24 Raker Tooth. 3-Wheeler 56-7/8 x 3/8 24R Blade breakage and poor blade performance are common problems with small 2 or 3 tabletop bandsaws. These problems are caused by the extreme flexing of the blade caused by the small size of the wheels that the blade runs on and the high speeds normally used. These 3 wheeler blades are specially designed for 2 or 3 three wheeler tabletop bandsaw to cut wood or non ferrous metals only . 3 wheeler blades will not stand up to ferrous metals. The different type of tooth patterns along with their functions are described below: (The width of blades do not play a role in the type of material being cut): 6 Hook - for cutting wood ; 14 Raker - for cutting nonferrous metals between 3/16 to 7/16 thick; 24 Raker - for cutting nonferrous metals between 1/8 to 3/16 thick; Note: As a rule for optimum cutting, 3 teeth need to touch the metal at one time. For example, cutting a material that is 1/8 thick aluminum would be best suited by a blade with 24 teeth. (3 teeth / 24 teeth/inch =1/8 inch ).
B000YQOKEM Availability: Currently unavailable Score: 9.615 Category: Tools Rating: 4.7 Votes: 4 Find similar products Magnate M72C14H6 Carbon Steel Bandsaw Blade, 72 Long - 1/4 Width, 6 Hook Tooth, 0.025 Thickness. Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal ( i.e. aluminum, copper and brass ) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel ( don't cut hard steel ), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 24 raker to cut 1/16 to 1/4 thick material, * 18 raker to cut 1/8 to 3/8 thick material,* 14 raker to cut 3/16 to 7/16 thick material,* 10 raker to cut 1/4 to 5/8 thick material,* 6 Hook to cut 3/8 to 2 thick material,* 4 Hook to cut 3/4 to 4-1/2 thick material,* 3 Hook to cut 1 to 6 thick material,* 2 Hook to cut 2 to 12 thick material. All Magnate bandsaw blades are welded and fabricated in the USA. The coils/material are USA brands but may not be made in the USA. All band saw blades’ pictures depict a general bandsaw blade and thus may look different from each particular item. Warning: For packaging purposes, this blade is folded into a coiled position which is similar to a spring and may pop open when being coiled or uncoiled. Wear heavy duty leather gloves and eye/body protection while using extreme care when coiling or uncoiling a blade. Failure to exercise the proper care could result in serious bodily injury. See your bandsaw owner's manual for further safety instructions. Please refer to your owner's/operation manual to make sure the blade's length, width and thickness can fit your bandsaw machine.	B000YQSNDQ Price: $11.55 Score: 9.615 Category: Tools Rating: 5 Votes: 4 Find similar products Magnate M72C12H3 Carbon Steel Bandsaw Blade, 72 Long - 1/2 Width, 3 Hook Tooth, 0.025 Thickness. Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal ( i.e. aluminum, copper and brass ) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel ( don't cut hard steel ), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 24 raker to cut 1/16 to 1/4 thick material, * 18 raker to cut 1/8 to 3/8 thick material,* 14 raker to cut 3/16 to 7/16 thick material,* 10 raker to cut 1/4 to 5/8 thick material,* 6 Hook to cut 3/8 to 2 thick material,* 4 Hook to cut 3/4 to 4-1/2 thick material,* 3 Hook to cut 1 to 6 thick material,* 2 Hook to cut 2 to 12 thick material. All Magnate bandsaw blades are welded and fabricated in the USA. The coils/material are USA brands but may not be made in the USA. All band saw blades’ pictures depict a general bandsaw blade and thus may look different from each particular item. Warning: For packaging purposes, this blade is folded into a coiled position which is similar to a spring and may pop open when being coiled or uncoiled. Wear heavy duty leather gloves and eye/body protection while using extreme care when coiling or uncoiling a blade. Failure to exercise the proper care could result in serious bodily injury. See your bandsaw owner's manual for further safety instructions. Please refer to your owner's/operation manual to make sure the blade's length, width and thickness can fit your bandsaw machine.