FantasticSearch | E-commerce Search Demo

Scroll to: Top Results

E-commerce Search Demo

AI Assisted Filters

Positive filters:

Negative filters:

Category filter:

Parameters

Query:

Positive filters:

Negative filters:

Category filters: All

AI Assist: ON

Page: 1

Products

Time taken: 3 Max score: 1000.000 Total hits: 600 Full time: 0.0 s
Showing 1-10 of 600 products

B002K5GYIK Price: $32.14 Score: 1000.000 Category: Tools Rating: 4 Votes: 1 Find similar products Magnate M160C1H6 Carbon Steel Bandsaw Blade, 160 Long - 1 Width, 6 Hook Tooth, 0.035 Thickness. Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal ( i.e. aluminum, copper and brass ) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel ( don't cut hard steel ), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 24 raker to cut 1/16 to 1/4 thick material, * 18 raker to cut 1/8 to 3/8 thick material,* 14 raker to cut 3/16 to 7/16 thick material,* 10 raker to cut 1/4 to 5/8 thick material,* 6 Hook to cut 3/8 to 2 thick material,* 4 Hook to cut 3/4 to 4-1/2 thick material,* 3 Hook to cut 1 to 6 thick material,* 2 Hook to cut 2 to 12 thick material. All Magnate bandsaw blades are welded and fabricated in the USA. The coils/material are USA brands but may not be made in the USA. All band saw blades’ pictures depict a general bandsaw blade and thus may look different from each particular item. Warning: For packaging purposes, this blade is folded into a coiled position which is similar to a spring and may pop open when being coiled or uncoiled. Wear heavy duty leather gloves and eye/body protection while using extreme care when coiling or uncoiling a blade. Failure to exercise the proper care could result in serious bodily injury. See your bandsaw owner's manual for further safety instructions. Please refer to your owner's/operation manual to make sure the blade's length, width and thickness can fit your bandsaw machine.	B000YQSNDQ Price: $11.55 Score: 111.111 Category: Tools Rating: 5 Votes: 4 Find similar products Magnate M72C12H3 Carbon Steel Bandsaw Blade, 72 Long - 1/2 Width, 3 Hook Tooth, 0.025 Thickness. Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal ( i.e. aluminum, copper and brass ) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel ( don't cut hard steel ), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 24 raker to cut 1/16 to 1/4 thick material, * 18 raker to cut 1/8 to 3/8 thick material,* 14 raker to cut 3/16 to 7/16 thick material,* 10 raker to cut 1/4 to 5/8 thick material,* 6 Hook to cut 3/8 to 2 thick material,* 4 Hook to cut 3/4 to 4-1/2 thick material,* 3 Hook to cut 1 to 6 thick material,* 2 Hook to cut 2 to 12 thick material. All Magnate bandsaw blades are welded and fabricated in the USA. The coils/material are USA brands but may not be made in the USA. All band saw blades’ pictures depict a general bandsaw blade and thus may look different from each particular item. Warning: For packaging purposes, this blade is folded into a coiled position which is similar to a spring and may pop open when being coiled or uncoiled. Wear heavy duty leather gloves and eye/body protection while using extreme care when coiling or uncoiling a blade. Failure to exercise the proper care could result in serious bodily injury. See your bandsaw owner's manual for further safety instructions. Please refer to your owner's/operation manual to make sure the blade's length, width and thickness can fit your bandsaw machine.
B002Y8J2PU Price: $18.19 Score: 83.333 Category: Tools Rating: 4 Votes: 1 Find similar products Magnate M137C12H6 Carbon Steel Bandsaw Blade, 137 Long - 1/2 Width, 6 Hook Tooth. Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal ( i.e. aluminum, copper and brass ) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel ( don't cut hard steel ), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 24 raker to cut 1/16 to 1/4 thick material, * 18 raker to cut 1/8 to 3/8 thick material,* 14 raker to cut 3/16 to 7/16 thick material,* 10 raker to cut 1/4 to 5/8 thick material,* 6 Hook to cut 3/8 to 2 thick material,* 4 Hook to cut 3/4 to 4-1/2 thick material,* 3 Hook to cut 1 to 6 thick material,* 2 Hook to cut 2 to 12 thick material. All Magnate bandsaw blades are welded and fabricated in the USA. The coils/material are USA brands but may not be made in the USA. All band saw blades’ pictures depict a general bandsaw blade and thus may look different from each particular item. Warning: For packaging purposes, this blade is folded into a coiled position which is similar to a spring and may pop open when being coiled or uncoiled. Wear heavy duty leather gloves and eye/body protection while using extreme care when coiling or uncoiling a blade. Failure to exercise the proper care could result in serious bodily injury. See your bandsaw owner's manual for further safety instructions. Please refer to your owner's/operation manual to make sure the blade's length, width and thickness can fit your bandsaw machine.	B072XDHVBX Price: $14.57 Score: 76.923 Category: Tools Rating: 4.5 Votes: 3 Find similar products Magnate M100.75C12H4 Carbon Steel Bandsaw Blade, 100-3/4 Long - 1/2 Width, 4 Hook Tooth. Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal ( i.e. aluminum, copper and brass ) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel ( don't cut hard steel ), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 24 raker to cut 1/16 to 1/4 thick material, * 18 raker to cut 1/8 to 3/8 thick material,* 14 raker to cut 3/16 to 7/16 thick material,* 10 raker to cut 1/4 to 5/8 thick material,* 6 Hook to cut 3/8 to 2 thick material,* 4 Hook to cut 3/4 to 4-1/2 thick material,* 3 Hook to cut 1 to 6 thick material,* 2 Hook to cut 2 to 12 thick material. All Magnate bandsaw blades are welded and fabricated in the USA. The coils/material are USA brands but may not be made in the USA. All band saw blades’ pictures depict a general bandsaw blade and thus may look different from each particular item. Warning: For packaging purposes, this blade is folded into a coiled position which is similar to a spring and may pop open when being coiled or uncoiled. Wear heavy duty leather gloves and eye/body protection while using extreme care when coiling or uncoiling a blade. Failure to exercise the proper care could result in serious bodily injury. See your bandsaw owner's manual for further safety instructions. Please refer to your owner's/operation manual to make sure the blade's length, width and thickness can fit your bandsaw machine.
B000YQOKEM Availability: Currently unavailable Score: 76.923 Category: Tools Rating: 4.7 Votes: 4 Find similar products Magnate M72C14H6 Carbon Steel Bandsaw Blade, 72 Long - 1/4 Width, 6 Hook Tooth, 0.025 Thickness. Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal ( i.e. aluminum, copper and brass ) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel ( don't cut hard steel ), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 24 raker to cut 1/16 to 1/4 thick material, * 18 raker to cut 1/8 to 3/8 thick material,* 14 raker to cut 3/16 to 7/16 thick material,* 10 raker to cut 1/4 to 5/8 thick material,* 6 Hook to cut 3/8 to 2 thick material,* 4 Hook to cut 3/4 to 4-1/2 thick material,* 3 Hook to cut 1 to 6 thick material,* 2 Hook to cut 2 to 12 thick material. All Magnate bandsaw blades are welded and fabricated in the USA. The coils/material are USA brands but may not be made in the USA. All band saw blades’ pictures depict a general bandsaw blade and thus may look different from each particular item. Warning: For packaging purposes, this blade is folded into a coiled position which is similar to a spring and may pop open when being coiled or uncoiled. Wear heavy duty leather gloves and eye/body protection while using extreme care when coiling or uncoiling a blade. Failure to exercise the proper care could result in serious bodily injury. See your bandsaw owner's manual for further safety instructions. Please refer to your owner's/operation manual to make sure the blade's length, width and thickness can fit your bandsaw machine.	B004CP2A9S Price: $11.55 Score: 71.429 Category: Tools Rating: 3.9 Votes: 7 Find similar products Magnate M67.5C316S6 Carbon Steel Bandsaw Blade, 67-1/2 Long - 3/16 Width, 6 Skip Tooth. Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal ( i.e. aluminum, copper and brass ) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel ( don't cut hard steel ), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 24 raker to cut 1/16 to 1/4 thick material, * 18 raker to cut 1/8 to 3/8 thick material,* 14 raker to cut 3/16 to 7/16 thick material,* 10 raker to cut 1/4 to 5/8 thick material,* 6 Hook to cut 3/8 to 2 thick material,* 4 Hook to cut 3/4 to 4-1/2 thick material,* 3 Hook to cut 1 to 6 thick material,* 2 Hook to cut 2 to 12 thick material. All Magnate bandsaw blades are welded and fabricated in the USA. The coils/material are USA brands but may not be made in the USA. All band saw blades’ pictures depict a general bandsaw blade and thus may look different from each particular item. Warning: For packaging purposes, this blade is folded into a coiled position which is similar to a spring and may pop open when being coiled or uncoiled. Wear heavy duty leather gloves and eye/body protection while using extreme care when coiling or uncoiling a blade. Failure to exercise the proper care could result in serious bodily injury. See your bandsaw owner's manual for further safety instructions. Please refer to your owner's/operation manual to make sure the blade's length, width and thickness can fit your bandsaw machine.
B004DHKFWE Price: $18.57 Score: 66.667 Category: Tools Rating: 5 Votes: 1 Find similar products Magnate M112C34H3 Carbon Steel Bandsaw Blade, 112 Long - 3/4 Width, 3 Hook Tooth. Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal ( i.e. aluminum, copper and brass ) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel ( don't cut hard steel ), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 24 raker to cut 1/16 to 1/4 thick material, * 18 raker to cut 1/8 to 3/8 thick material,* 14 raker to cut 3/16 to 7/16 thick material,* 10 raker to cut 1/4 to 5/8 thick material,* 6 Hook to cut 3/8 to 2 thick material,* 4 Hook to cut 3/4 to 4-1/2 thick material,* 3 Hook to cut 1 to 6 thick material,* 2 Hook to cut 2 to 12 thick material. All Magnate bandsaw blades are welded and fabricated in the USA. The coils/material are USA brands but may not be made in the USA. All band saw blades’ pictures depict a general bandsaw blade and thus may look different from each particular item. Warning: For packaging purposes, this blade is folded into a coiled position which is similar to a spring and may pop open when being coiled or uncoiled. Wear heavy duty leather gloves and eye/body protection while using extreme care when coiling or uncoiling a blade. Failure to exercise the proper care could result in serious bodily injury. See your bandsaw owner's manual for further safety instructions. Please refer to your owner's/operation manual to make sure the blade's length, width and thickness can fit your bandsaw machine.	B0011WMF5O Price: $12.53 Score: 58.824 Category: Tools Rating: 5 Votes: 4 Find similar products Magnate M103C14H4 Carbon Steel Bandsaw Blade, 103 Long - 1/4 Width, 4 Hook Tooth. Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal ( i.e. aluminum, copper and brass ) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel ( don't cut hard steel ), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 24 raker to cut 1/16 to 1/4 thick material, * 18 raker to cut 1/8 to 3/8 thick material,* 14 raker to cut 3/16 to 7/16 thick material,* 10 raker to cut 1/4 to 5/8 thick material,* 6 Hook to cut 3/8 to 2 thick material,* 4 Hook to cut 3/4 to 4-1/2 thick material,* 3 Hook to cut 1 to 6 thick material,* 2 Hook to cut 2 to 12 thick material. All Magnate bandsaw blades are welded and fabricated in the USA. The coils/material are USA brands but may not be made in the USA. All band saw blades’ pictures depict a general bandsaw blade and thus may look different from each particular item. Warning: For packaging purposes, this blade is folded into a coiled position which is similar to a spring and may pop open when being coiled or uncoiled. Wear heavy duty leather gloves and eye/body protection while using extreme care when coiling or uncoiling a blade. Failure to exercise the proper care could result in serious bodily injury. See your bandsaw owner's manual for further safety instructions. Please refer to your owner's/operation manual to make sure the blade's length, width and thickness can fit your bandsaw machine.
B000R8INQ8 Price: $20.07 Score: 58.824 Category: Tools Rating: 5 Votes: 1 Find similar products Magnate M123C34H4 Carbon Steel Bandsaw Blade, 123 Long - 3/4 Width, 4 Hook Tooth. Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal ( i.e. aluminum, copper and brass ) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel ( don't cut hard steel ), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 24 raker to cut 1/16 to 1/4 thick material, * 18 raker to cut 1/8 to 3/8 thick material,* 14 raker to cut 3/16 to 7/16 thick material,* 10 raker to cut 1/4 to 5/8 thick material,* 6 Hook to cut 3/8 to 2 thick material,* 4 Hook to cut 3/4 to 4-1/2 thick material,* 3 Hook to cut 1 to 6 thick material,* 2 Hook to cut 2 to 12 thick material. All Magnate bandsaw blades are welded and fabricated in the USA. The coils/material are USA brands but may not be made in the USA. All band saw blades’ pictures depict a general bandsaw blade and thus may look different from each particular item. Warning: For packaging purposes, this blade is folded into a coiled position which is similar to a spring and may pop open when being coiled or uncoiled. Wear heavy duty leather gloves and eye/body protection while using extreme care when coiling or uncoiling a blade. Failure to exercise the proper care could result in serious bodily injury. See your bandsaw owner's manual for further safety instructions. Please refer to your owner's/operation manual to make sure the blade's length, width and thickness can fit your bandsaw machine.	B0010QQKBQ Price: $9.79 Score: 55.556 Category: Tools Rating: 3.4 Votes: 22 Find similar products Magnate M70.5C14R24 Carbon Steel Bandsaw Blade, 70-1/2 Long - 1/4 Width, 24 Raker Tooth. Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal ( i.e. aluminum, copper and brass ) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel ( don't cut hard steel ), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 24 raker to cut 1/16 to 1/4 thick material, * 18 raker to cut 1/8 to 3/8 thick material,* 14 raker to cut 3/16 to 7/16 thick material,* 10 raker to cut 1/4 to 5/8 thick material,* 6 Hook to cut 3/8 to 2 thick material,* 4 Hook to cut 3/4 to 4-1/2 thick material,* 3 Hook to cut 1 to 6 thick material,* 2 Hook to cut 2 to 12 thick material. All Magnate bandsaw blades are welded and fabricated in the USA. The coils/material are USA brands but may not be made in the USA. All band saw blades’ pictures depict a general bandsaw blade and thus may look different from each particular item. Warning: For packaging purposes, this blade is folded into a coiled position which is similar to a spring and may pop open when being coiled or uncoiled. Wear heavy duty leather gloves and eye/body protection while using extreme care when coiling or uncoiling a blade. Failure to exercise the proper care could result in serious bodily injury. See your bandsaw owner's manual for further safety instructions. Please refer to your owner's/operation manual to make sure the blade's length, width and thickness can fit your bandsaw machine.