FantasticSearch | E-commerce Search Demo

Scroll to: Top Results

E-commerce Search Demo

AI Assisted Filters

Positive filters:

Negative filters:

Category filter:

Parameters

Query:

Positive filters:

Negative filters:

Category filters: All

AI Assist: ON

Page: 1

Products

Time taken: 3 Max score: 1000.000 Total hits: 100 Full time: 0.0 s
Showing 1-10 of 100 products

B0048LYF8U Availability: Currently unavailable Score: 1000.000 Category: Electronics Rating: 3 Votes: 1 Find similar products US- Rack-mountable - Online - Ac 200/208/220/230/240 V - 2.4 Kw - 1 X Manageme. 3000va / 3kva / 2500 Watt On-line, Double-conversion Ups System For Critical Server, Network And Telecommunications Equipment. 2u Rackmount Form Factor With An Installed Depth Of Only 66cm (26 Inches). Full Time Sine Wave 200/208/220/230/240v Output With +/-2% Voltage Regulation. Ups Actively Converts Raw Incoming Ac Power To Dc, Then Re-converts Output Back To Completely Regulated, Filtered Ac Output. Operates Continuously Without Using Battery Power During Brownouts To 120v And Overvoltages To 288v. C20 Inlet Accepts A Wide Variety Of Optional Cordsets. C19 And C13 Output Receptacles. Network Management Interfaces Include Usb Port, Db9 Serial Port And Snmpwebcard Slot. Built-in Db9 Port Offers Both Enhanced Rs-232 Enabled Monitoring Data, Plus Contact Closure Monitoring Ability. Hid-compliant Usb Interface Enables Integration With Built-in Power Management And Auto Shutdown Features Of Windows And Mac Os X. Multi-stage Metered Current Monitoring And Battery Charge Status Leds.	B08MZS2ZC7 Availability: Currently unavailable Score: 7.246 Category: Electronics Rating: 4.3 Votes: 17 Find similar products CyberPower PDU15SW10ATNET Switched ATS PDU, 100-120V, 15A (Derated to 12A), 10 Outlets, RMCARD205 Pre-Installed, 1U Rackmount. The CyberPower PDU15SW10ATNET, a 10-outlet (rear), 1U rackmount switched automatic transfer switch (ATS) power distribution unit (PDU), provides 100-120V 15A output. It distributes unfiltered electrical pass-through to 10 NEMA 5-15R receptacles from redundant NEMA 5-15P plugs. Dual power cords can be plugged into separate power sources to provide redundancy to single-corded connected equipment. If power for the primary source exceeds the lower or upper thresholds, or if power fails, the PDU will switch to the secondary power source to ensure continuous operation. The PDU will switch back to the primary power source when incoming power becomes stable. The PDU15SW10ATNET includes a SNMP/HTTP card (RMCARD205). With the SNMP card and an IP address on the network interface, users have real-time monitoring and outlet control of the PDU. The switched outlet receptacles can be managed individually or collectively. The LCD panel provides local monitoring of the PDU and on/off control for the outlets. It can also be used to measure the electrical current (displayed in amperes) used by connected equipment. The LCD panel also shows input and output voltages, active power consumption levels (displayed in kilowatts), and hardware and firmware versions. Designed for datacenters and other demanding electrical applications, the PDU15SW10ATNET has rugged, industrial-grade metal housing, a 10-foot AC power cord, and a cord retention tray. It can be mounted horizontally and is UL and CSA certified by ETL, and Class A FCC-certified. A three-year warranty covers the PDU and connected equipment for as long as you own the product.
B003XZWOIK Availability: Currently unavailable Score: 7.042 Category: Electronics Rating: 5 Votes: 1 Find similar products Altronix Power Distribution Module PD4ULCB. 4 Output Power Distribution Module - Converts AC or DC power input (28 volts @ 14 amp max.) into four (4) PTC power outputs, UL Recognized.	B0007CO7Z0 Availability: Currently unavailable Score: 6.897 Category: Electronics Rating: 4 Votes: 1 Find similar products APC Smart-UPS RT Tower Isolation/Step-Down Transformer - transformer - 4600 VA ( SURT004 ) (Discontinued by Manufacturer). The Step-Down Transformer converts high voltage output into low voltage output for powering low voltage AC equipment. The product design is consistent with other APC products, so you can be assured of consistent look and feel.
B08JD68VG1 Price: $56.61 Score: 6.711 Category: Electronics Rating: 4.6 Votes: 17 Find similar products MEAN WELL DR-UPS40 40 Amp DC Uninterruptable Power Supply. 40 amp DC uninterruptable power supply battery controller for DIN rail UPS system specifications size (L x W x H) (inches): 4.9 x 2.2 x 4.9 DC input: 24-29v 40a battery input: 21-29v 0-40a, charge current: 2a suitable for 24V system up to 40a parallel connection to DC bus built-in battery Test function battery polarity protection 2-year warranty certifications: CE.	B07NZHNW7D Price: $6.49 Score: 6.623 Category: Electronics Rating: 4.3 Votes: 11 Find similar products 150W DC-DC Step Up Converter 12-32V in to 12-35V Out Adjustable Voltage Power Supply Boost Module. This versatile DC-DC boost power supply / converter module steps up any input voltage from 10V to 32V to any output voltage from 12V to 35V at up to 150W output power and 6A current. It is especially useful for automotive 12V applications, where standard 12V battery power can be boosted to 19V for use as a laptop computer power supply, or to 18V or 24V for other applications requiring higher voltages. Module Specifications: Type: Non-isolated step-up power conversion module Type: Non-isolated step-up power conversion module Input voltage: 10-32V on IN+ and IN- screw terminals Input voltage: 10-32V on IN+ and IN- screw terminals Input Current: 10A (MAX) Input Current: 10A (MAX) Output Voltage: 12V-35V Continuously adjustable on OUT+ and OUT- screw terminals (Output voltage must be greater than input voltage) Output Voltage: 12V-35V Continuously adjustable on OUT+ and OUT- screw terminals (Output voltage must be greater than input voltage) Output Voltage Adjustment: Multi-turn Potentiometer Output Voltage Adjustment: Multi-turn Potentiometer Output Current: 6A (MAX) Output Current: 6A (MAX) Output Power: Natural cooling 100W (MAX), with forced air 150W (MAX) Output Power: Natural cooling 100W (MAX), with forced air 150W (MAX) Conversion efficiency: 94% (Measured with input = 16V, output = 19V 2.5A) Conversion efficiency: 94% (Measured with input = 16V, output = 19V 2.5A) Operating temperature: Industrial grade (-40C to + 85C) If ambient temperature exceeds 40 degrees, derate power or use a cooling fan Operating temperature: Industrial grade (-40C to + 85C) If ambient temperature exceeds 40 degrees, derate power or use a cooling fan Temperature rise at full power: 45C Temperature rise at full power: 45C No-load current: Typical 25mA No-load current: Typical 25mA Short circuit protection: None, please use caution to protect module from overcurrent Short circuit protection: None, please use caution to protect module from overcurrent Input reverse polarity protection: None, please use diode in series with the input to protect against input reverse polarity Input reverse polarity protection: None, please use diode in series with the input to protect against input reverse polarity Indicators: On-board LED illuminates when voltage is applied to the module Indicators: On-board LED illuminates when voltage is applied to the module Size : 65mm x 46.5mm (including heatsinks) x 23mm (2.56in x 1.8in x 0.9in) Size : 65mm x 46.5mm (including heatsinks) x 23mm (2.56in x 1.8in x 0.9in) Weight: 64 grams Weight: 64 grams.
B00RW914DO Availability: Currently unavailable Score: 6.579 Category: Electronics Rating: 4.4 Votes: 2 Find similar products INTegral 203T - 2000VA (2kVA) Line Interactive Desktop UPS. Power Innovations’ INTegral line of backup power systems provide an affordable solution to quality backup power ranging from 650 VA to 10,000 VA. The INTegral incorporates a line-interactive topology coupled with a high quality, pure sine-wave output to ensure that quality power is always available for your equipment. INTegral protects you while remaining cost-effective, efficient, robust, and quiet. INTegral is available in various form factors including 1U and 2U rack mountable and desktop configurations. All INTegral products ranging from 650VA to 5,000VA come with internal batteries to provide backup during utility line interruptions and abnormalities. For larger systems, interruptions that are longer in nature or for applications with extended backup needs, external battery options are also available. By inserting Power Innovations’ UPQnet-agent 9 mini into the INTegral’s intelligent slot, the INTegral line can be monitored and controlled remotely over the internet or by using simple internet protocols (SNMP, MODBUS TCP). Status updates can be sent over email or text messages. All systems are rated for 120VAC, 60Hz.	B01F334BH6 Price: $71.99 Score: 6.579 Category: Electronics Rating: 4.3 Votes: 47 Find similar products PoE Texas GPOE-8A-48v60w \| 8 Port Gigabit Passive PoE Injector for PoE Cameras, IP Phones and WiFi Access Points \| Includes 48 Volt 60 Watt Power Supply. Instantly add PoE to any gigabit switch. This device will provide power and data for up to 8 Power over Ethernet devices like Phones, Cameras, Access Points and more. Power and data will be sent on Mode A (pins 1,2 3,6). The kit includes a 48v 60w UL power supply with 60 watts of available power for all devices combined. Product Features Extend power up to 328 ft (100 meters) 10/100/1000 Gigabit data capability Provides power for 8 PoE devices with 60 watts total power Use to power IEEE 802.3af Passive Mode A Operation on pins (-1,2 +3,6)- Always on Power Shielded RJ45 ports - 8 data (LAN) in, 8 Data + Power (PoE) out 650mA self resetting fuse per port Instantly adds PoE to any network switch or router Power supply included 48 volts DC, 1.25 amps, 60 watts 110 to 220 volt AC operation 90% efficient UL, CE and FCC approved Applications: IP phones WiFi Access points IP Cameras Other 802.3af Devices Devices labeled 12 volt, POE (please see our video on this topic) USB, 5v and 12v , non-poe devices - please see our active splitters Other products from PoE Texas GPOE-4A-48v48w - 4 port version GPOE-8A-48v120w - with 120 watts available GPOE-8B-24v60w - for 24v passive PoE applications GPOES-8-7AB-48v60w - with integrated switch POE-8-48v60w - 8-port injector for 10/100 Mbps data speed GPOE-12AB-48v120w - 12 port injector with 120 watts available POE-Tester-GEN2 - Handheld voltmeter to display power used by a device.
B00AR0AAN0 Availability: Currently unavailable Score: 6.536 Category: Electronics Rating: 5 Votes: 1 Find similar products SRM-30 Astron Rack Mount Switching Power Supply, Rack Mount, Switching, 30 A Peak. .	B01MRNQPPC Availability: Currently unavailable Score: 6.369 Category: Electronics Rating: 1 Votes: 1 Find similar products 45W DC Power Distribution. Eliminate wall warts and other power clutter in your AV, networking or security installations with DC Power Distribution, the perfect power solution for build areas with a multitude of devices in 5V and 12V voltages. With ultimate flexibility built in, these DC Power Distribution solutions provide support and availability for multiple industry standard voltages as well as mounting options allowing the units to be placed within a typical rack unit, small enclosure or wall box. This space-saving solution is intuitive to install with a color-coded screw terminal connector platform that manages the multiple voltage options and easy to identify polarity labeling. Simply streamline the install by allowing leads to be trimmed to length and by reducing design modifications contributing to additional labor costs with DC Power Distribution. Package Contents: Multi-Mount 17-Outlets PDU Flexible Mounting Hardware Color-coded Screw Terminal Connectors to Connect Devices 1 x 6ft IEC Power Cord Product Type: PDU Input Voltage: 120 V AC Output Voltage: 12 V DC Output Voltage: 5 V DC Output Voltage: 120 V AC Product Type: PDU Input Voltage: 120 V AC Manufacturer Part Number: PD-DC-45 Limited : 3 Year Output Voltage: 12 V DC Output Voltage: 5 V DC Output Voltage: 120 V AC Form Factor: Rack-mountable Input Receptacles: 1 x NEMA 5-15P Input Current: 12 A Output Receptacles: 2 x USB Output Receptacles: 3 x NEMA 5-15R/20R Output Receptacles: 12 x Screw Terminal Protection Type: Overload Protection Protection Type: Overcurrent Protection Form Factor: Rack-mountable Input Receptacles: 1 x NEMA 5-15P Input Current: 12 A Manufacturer: Legrand Group Product Name: Multi-Mount 17-Outlets PDU Output Receptacles: 2 x USB Output Receptacles: 3 x NEMA 5-15R/20R Output Receptacles: 12 x Screw Terminal Protection Type: Overload Protection Protection Type: Overcurrent Protection Brand Name: Middle Atlantic Input Voltage Range: 100 V AC - 132 V AC Brand Name: Middle Atlantic Input Voltage.