FantasticSearch | E-commerce Search Demo

Scroll to: Top Results

E-commerce Search Demo

AI Assisted Filters

Positive filters:

Negative filters:

Category filter:

Parameters

Query:

Positive filters:

Negative filters:

Category filters: All

AI Assist: ON

Page: 1

Products

Time taken: 3 Max score: 1000.000 Total hits: 100 Full time: 0.0 s
Showing 1-10 of 100 products

B0056GPVB6 Availability: Currently unavailable Score: 1000.000 Category: Electronics Rating: 4.7 Votes: 61 Find similar products Goldring 1042 Moving Magnet Phono Cartridge. Goldring 1042 This is a cartridge for the audiophile who demands the ultimate sonic performance from their system, together with the convenience of a user replaceable stylus. The 1042 uses a nude, natural-diamond stylus with a Gyger S profile. This is a revolutionary line-contact type which is shaped to more closely resemble the record cutting head than any previous design. The stylus profile is the main factor governing overall sound quality in a cartridge and the shape of the Gyger S with its 6 µm radius allows it to trace the smallest groove detail with complete fidelity. Mid-range tonality is incredibly accurate and precise with high frequency sibilance banished. The extended side wall contact of the Gyger-S diamond also gives the 1042 unsurpassed resolution of the fine groove modulations, producing an exceptionally detailed, smooth and musical sound. Low Mass Pocan Body The 1000 series uses a strong one piece body which holds the fixed parts securely in place. Made from a special type of ultra-rigid, glass reinforced polyester called Pocan, the body can be tightly bolted to the head shell for maximum efficiency and optimum sound quality. The user replaceable stylus carrier slots tightly into the body with a locating pin preventing unwanted vibrations which would otherwise colour the sound. An integral mu-metal can keeps the generator parts shielded from hum-inducing stray magnetic fields. Because Pocan has a high strength-to-mass ratio, the overall mass of the G1000 series cartridges is kept below 6.5 g. Low mass and moderate compliance keep the natural arm/cartridge resonance within safe limits for easy matching to a wide range of tonearms. High Efficiency Magnetic Circuit Finely etched mu-metal is laminated to form the pole pieces around which are fitted two formerless coils of four thousand turns each. This unique design reduces mass and also makes for a very efficient magnetic circuit producing a higher than average output. This construction also reduces the loss at high frequencies inherent in conventional designs, making for a smooth and extended frequency response. Reduced Moving Mass The 1000 series uses a unique ultra-low-mass, micro-miniature Alnico V magnet made to a tolerance that can be achieved by no other manufacturer worldwide. Welded to the magnet is a gold plated nickel tie-bar which provides an earth path for vinyl static charge build up and stabilses the cantilever in unwanted vibrational modes. The whole ultra-low-mass assembly is then mounted in a special butyl rubber polymer with optimised damping characteristics. Expert Adjustment The correct setting of stylus azimuth (or horizontal tracking angle) is essential for the maintenance of a proper stereo sound stage. Azimuth is the term used to describe the angle that the vertical centre-line of the stylus makes with the record surface and this must be exactly perpendicular to the record groove. This is not usually a user adjustable parameter on most budget decks and so it is vital that the cartridge leaves the factory with the azimuth precisely set. Badly adjusted azimuth can cause uneven channel balance and increased crosstalk between channels which would severely degrade the stereo image. Specifications Frequency Response 20 Hz-20 kHz +/- 3 dB Channel Balance within 2 dB @ 1 kHz Channel Separation better than 25 dB @ 1 kHz Sensitivity 6.5 mV +/-1.5 dB, 1 kHz @ 5 cm/sec Static Compliance 24 mm/N (lat); 16 mm/N (vert) Equivalent tip mass 0.45 mg Vertical Tracking Angle 24 ° Stylus Profile Gyger S Stylus Type Replaceable Load Resistance 47 kΩ Load Capacitance 150-200 pF Internal Inductance 570 mH Internal Resistance 660 Ω Cartridge Mass 6.3 g Cartridge Mass (inc. fixings) 7.6 g Fixing Centre 0.5 (12.7 mm) Playing Weight 1.5 - 2.0 g (1.7 g nom.) Replacement stylus 1042 - D42.	B01M6ZKLWZ Availability: Currently unavailable Score: 5.464 Category: Electronics Rating: 3.9 Votes: 6 Find similar products Pro-Ject Classic Sub-Chassis Turntable with 9 Carbon/Aluminum Tonearm (Eucalyptus). Offering a Classic Look and Innovative High-End TechnologyThe Classic Sub-Chassis Turntable with 9 Carbon/Aluminum Tonearm makes use of a traditional frame design which was established by the famous turntable manufacturers of the 50’s and 60’s. It also uses a compact simple and elegant form factor and incorporates a combination of approved belt drive design using a low-noise AC motor with an ultra-precision-frequency DC-driven AC generator for ultimate speed stability at both 33 and 45 rpm. An advanced aluminum and MDF subchassis is suspended by six TPE balls to effectively decouple the completely redesigned 9” composite carbon fiber/aluminum tonearm and TPE-damped aluminum platter from ambient vibrations.FeaturesHeight-adjustable decoupling feetPrecision balanced TPE-damped aluminum platter with felt matMetal/MDF sandwich chassis floating on TPE suspension9 carbon fiber/aluminum tonearm with MM and MC capabilityPrecision Japanese ball bearing at base of tonearmIntegrated central vertical cable outlet for unhindered arm movementUltra low-friction Zircon pinpoint cardan tonearm bearingsAzimuth and VTA both fully adjustableTPE-dampened counterweight with chrome finishFactory installed and adjusted Ortofon 2M silver phono cartridgeClassic wooden chassis available in 3 matte finishes: walnut rosenut and eucalyptus wood grain What's in the Box:Classic Sub-Chassis TurntableDust coverPower supplySpecificationsDrive principle: Belt drivePlatter: 11.8 aluminumMains bearing: Stainless steelWow & flutter: 33rpm: ±0.03% 45rpm: ±0.05%Speed variance: 33rpm: ±0.10% 45rpm: ±0.11% Signal-to-noise: - 71dBEffective arm length: 9.06Effective arm mass: 0.48 oz.Overhang: 0.71Tracking force: 10 - 30mNPower connection: 110/120 or 230/240V - 50 or 60HzPower consumption: 5 watt max/<0.5 watt standbyDimensions (W x H x D): 18.1 x 5.2 x 13.8Weight: 22.5 lbs.
B01JJ73E7U Price: $12.11 Score: 5.291 Category: Electronics Rating: 4.4 Votes: 19 Find similar products DETROLA KM-837 KM837 Phonograph Turntable Stylus Needle 793-D7M. .	B005DL0S08 Availability: Currently unavailable Score: 4.950 Category: Electronics Rating: 3.3 Votes: 8 Find similar products Phobya G-Silent 18 Black 700rpm 180 x 180 x 25 Tower Complete Another – Component (180 x 25 x 180 mm). .
B08KZW8Y7D Availability: Currently unavailable Score: 4.902 Category: Electronics Rating: 5 Votes: 1 Find similar products Vipxyc LP Record Clamp, 50/ 60Hz Bubble Level Speed Detection Turntable Record Clamp 7mm Diameter of Spindle Hole Fit Well with Most of Existing Turntable(Silver). products description: This is a great record stabilizer for LP record player, which will efficiently keep the disc from shaking and reducing vibration with stabilizing rotational speed. Perfect for maintaining stability, and improving acoustic quality. Made of high quality aluminum alloy, durable to use. Feature: For eliminating vibration, stabilizing rotational speed, and maintaining horizontal level of Turntable.Realistic sound reproduction and lower noise provide you a pure and excellent enjoyment in music.Spindle hole is suitable for spindle diameter up to 7mm, fit well with most of existing turntable.Manufactured from high-quality aluminum alloy, makes the surface glossy and beautiful, durable to use.Built-in 50/ 60Hz high precision bubble level, show you the rotation speed of the disc. Spec: Color: Silver, Black (Optional) Material: Aluminum Alloy Diameter: Approx. 78mm Diameter of Handheld Part: Approx. 65mm Diameter of Spindle Hole: Approx. 7mm Height: Approx. 34mm Weight: 280g Package List: 1 * Record Stabilizer (Record is NOT included.).	B00GA7SYH8 Price: $19.7 Score: 4.902 Category: Electronics Rating: 4.1 Votes: 52 Find similar products Dayton Audio ND25FN-4 1 Silk Dome Neodymium Tweeter Element 4 Ohm. Quick Overview Compact soft dome tweeter element with high output and smooth, low-distortion sound. The high-strength neodymium motor features an aluminum heat sink for cool operation and reduced power compression. Product Highlights 1 treated silk dome diaphragm Faceplate-free design enables versatile custom mounting High-strength neodymium motor with heatsink and ferrofluid cooling Extremely smooth and extended treble response beyond 22kHz Perfect for use with a waveguide or custom mounting plate Product Manuals / Spec Sheets / Downloads Dayton Audio ND25FN-4 Specification Sheet Dayton Audio ND25FN-4 Data Files AddThis Sharing Buttons Share to FacebookFacebook Share to TwitterTwitter Share to MoreAddThis 2 Product Description Dayton Audio’s ND25FN-4 is a versatile 1” tweeter element for use in highly customized applications requiring smooth, clean treble output. The treated silk dome diaphragm delivers excellent detail and smoothness, while the high-strength neodymium magnet enables high output from an extremely compact size. The rear-mounted heatsink and ferrofluid-filled magnetic gap provide improved heat dissipation from the compact motor structure, for reduced power compression at high levels. A copper pole cap further reduces distortion and inductance effects. This element is identical to the round-faceplate ND25FA-4 model, but with no faceplate installed. It’s perfect for installation into a waveguide or a custom mounting plate, or in limited clearance applications such as automotive A-pillars. Simply bond the unit in place from behind, and prepare to be surprised at the clean, detailed output! Product Details Speaker Series ND Series Model Number ND25FN-4 List Price $19.99 Color Black Unit of Measure Each UPC 848791000867 Warranty - Parts 5 Years Warranty - Labor 5 Years Product Shipping Weight (lbs.) 0.13 Speaker Type Tweeter Power Handling (RMS) 20 watts Power Handling (max) 40 watts Continuous Program Power -- Impedance 4 ohms Sensitivity 90 dB @ 2.83V/1m Frequency Response 2 500 - 20 Voice Coil Diameter 25 mm Magnet Weight -- DC Resistance (Re) 3.3 ohms Voice Coil Inductance (Le) 0.05 mH Resonant Frequency (Fs) 1 290 Hz Mechanical Q (Qms) 4.61 Electromagnetic Q (Qes) 2.54 Total Q (Qts) 1.64 Diaphragm Mass Inc. Airload (Mms) -- Moving Mass Of Diaphragm (Mmd) -- Mechanical Compliance of Suspension (Cms) -- Surface Area Of Cone (Sd) 7.5 cm² Volume of Displacement (Vd) -- BL Product (BL) -- Compliance Equivalent Volume (Vas) -- Maximum Linear Excursion (Xmax) -- Drivers Mechanical Losses (Rms) -- Cone / Diaphragm Material Treated Silk Dome Entry / Exit Diameter -- Surround Material Treated Silk Voice Coil Wire Material Copper Voice Coil Former Kapton® Basket/Frame Material -- Magnet Material Neodymium Overall Outside Diameter 41 mm Overall Depth 21 mm Baffle Cutout Diameter 34 mm # Mounting Holes 4 Mounting Hole Diameter -- Bolt Circle Diameter -- Product Weight -- Cone / Dome Diameter 1.
B08M9JCT9R Price: $213.99 Score: 4.854 Category: Electronics Rating: 5 Votes: 3 Find similar products IMAGE DYNAMICS IDQS8 8 125W RMS Shallow Mount SUBWOOFER Speaker (IDQS8-D2 \| 125W RMS). IDQS8 D2 \| 8 125W RMS Dual 2-Ohm Shallow Subwoofer FEATURES: SPECIFICATIONS: Features: High Excursion Design allows acoustically linear bass output at all rated power levels. Parabolic Santoprene Surround to ensure cone linearity and control. Poly/Mica Cone for strong and distortion free bass reproduction while still reproducing all the musical nuances. Nomex Spider for consistent control throughout the piston range and life of the woofer. Poly Carbonate Neck Joint allows the woofer to handle more raw power without any mechanical failure or flex and isolate the heat from the BASV voice coil former from the cone. American Made Flat Wound Extended Voice Coil gives our woofers higher magnetic flux (strength) and more voice coil “traction” in the magnetic gap with over 1.75” of linear travel in the magnetic gap. Extended Y-35 Motor Structure allows the voice coil to move freely without any mechanical bottoming out while producing a very powerful flux field. Field Replaceable Cone Assembly can be changed in 10 minutes with only 16 screws and alignment shims that come with our recone kits. Parameters: Power Handling: 125W RMS 250W Peak VC Impedance: 2-Ohms + 2-Ohms Test Impedance: 1-Ohm Driver Displacement: 0.03 Fs: 53 Hz SD: 213.82 sqCM Vas: 5.379 Ltr Cms: 98.67 M/N Mms: 92.033 g BL: 5.109 Qms: 3.607 Qes: 1.346 Qts: 0.98 No: 0.0683% Spl: 82 dB Xmax: 7mm Voice Coil: 1.5 Voice Coil Height: 0.87 Voice Coil Type: Kapton Former Voice Coil Wire: Copper DC Resistance: 1.15 Ohms Voice Coil Induct at 1kHz: 0.37 MH Frequency Response: 50-500Hz Resonant Freq: 53 Fs Hz HE-Magnetic Gap Height: 0.314 Motor Structure: 21.69 oz Mounting Depth: 3.11 Cutout Diameter: 7.18.	B00GB96TG8 Price: $14.98 Score: 4.808 Category: Electronics Rating: 4.7 Votes: 31 Find similar products Dayton Audio ND25FA-4 1 Soft Dome Neodymium Tweeter. Quick Overview Compact, ultra-smooth soft dome tweeter with excellent detail and high power handling. The small faceplate and tiny neodymium motor make it easy to keep center-to-center distance to a minimum for improved off-axis response, and the exceptionally flat response above 3kHz makes crossover design an absolute breeze! Product Highlights Exceptionally flat treble response with low distortion Compact round faceplate design is simple to install High-strength neodymium motor with heatsink and ferrofluid cooling 1 diameter voice coil for good off-axis dispersion Clean, modern styling and appearance Product Manuals / Spec Sheets / Downloads Dayton Audio ND25FA-4 Specification Sheet Dayton Audio ND25FA-4 Data Files AddThis Sharing Buttons Share to FacebookFacebook Share to TwitterTwitter Share to MoreAddThis Product Description This tweeter is smooth! The Dayton Audio ND25FA-4 is a 1” soft-dome tweeter that combines an exceptionally flat response above 3 kHz with a compact round faceplate for a clean, modern appearance that integrates easily into any design. The tiny yet powerful neodymium motor structure features an aluminum heatsink and ferrofluid cooling for low power compression and improved long-term power handling. A copper pole cap within the motor further reduces distortion and inductance effects. Choose the ND25FA-4 when you need detail that that doesn’t become fatiguing or shrill at high volumes, for a highly refined presentation. The compact faceplate allows for close center-to-center spacing of drivers, making these tweeters perfect for line array use or D’Appolito (MTM) configurations with wide dispersion. Product Details Speaker Series ND Series Model Number ND25FA-4 List Price $22.99 Color Black Unit of Measure Each UPC 848791000850 Warranty - Parts 5 Years Warranty - Labor 5 Years Product Shipping Weight (lbs.) 0.2 Speaker Type Tweeter Power Handling (RMS) 20 watts Power Handling (max) 40 watts Continuous Program Power -- Impedance 4 ohms Sensitivity 90 dB @ 2.83V/1m Frequency Response 2 500 - 20 Voice Coil Diameter 25 mm Magnet Weight -- DC Resistance (Re) 3.2 ohms Voice Coil Inductance (Le) 0.03 mH Resonant Frequency (Fs) 1 350 Hz Mechanical Q (Qms) 3.87 Electromagnetic Q (Qes) 2.61 Total Q (Qts) 1.56 Diaphragm Mass Inc. Airload (Mms) -- Moving Mass Of Diaphragm (Mmd) -- Mechanical Compliance of Suspension (Cms) -- Surface Area Of Cone (Sd) 7.5 cm² Volume of Displacement (Vd) -- BL Product (BL) -- Compliance Equivalent Volume (Vas) -- Maximum Linear Excursion (Xmax) -- Drivers Mechanical Losses (Rms) -- Cone / Diaphragm Material Soft Dome Entry / Exit Diameter -- Surround Material -- Voice Coil Wire Material Copper Voice Coil Former Kapton® Basket/Frame Material -- Magnet Material Neodymium Overall Outside Diameter 66 mm Overall Depth 35.9 mm Baffle Cutout Diameter 45 mm # Mounting Holes 4 Mounting Hole Diameter -- Bolt Circle Diameter -- Product Weight -- Cone / Dome Diameter 1.
B002SE1X34 Price: $821.83 Score: 4.785 Category: Electronics Rating: 3.2 Votes: 6 Find similar products Nagaoka MP-500H AUDIO MM Cartridge MP TYPE CARTRIDGE SHELL. .	B0006B4ZS6 Price: $25.93 Score: 4.739 Category: Electronics Rating: 4.5 Votes: 18 Find similar products Dayton Audio ND20FA-6 3/4 Soft Dome Neodymium Tweeter. Quick Overview This versatile tweeter is a huge step above the average budget tweeter. It has the sensitivity, smoothness, and power handling to individually do a two-way with most small woofers. Product Highlights Compact neodymium motors have low stray field Ferrofluid enhances power handling and helps damp resonance Front-mount pressfit design Center-to-center spacing as low as 1-3/4 Extremely flat and extended response Product Manuals / Spec Sheets / Downloads Dayton Audio ND20FA-6 Specification Sheet Dayton Audio ND20FA-6 Data Files AddThis Sharing Buttons Share to FacebookFacebook Share to TwitterTwitter Share to MoreAddThis Product Description Dont let the low price fool you! This versatile tweeter is a huge step above the average budget tweeter. Conceived with line array thoughts in mind, it is finally possible to achieve the inter-driver spacing needed to minimize comb filtering out to nearly 20 kHz. But its uses dont stop at line arrays-- it has the sensitivity, smoothness, and power handling to individually do a two-way with most small woofers. Or, use it in an A-pillar in your car as a great inexpensive component tweeter. Give them a try for your next budget or micro speaker-- you will be pleasantly surprised! Product Details Speaker Series ND Series Model Number ND20FA-6 List Price $19.99 Color Black Unit of Measure Each UPC 844632000874 Warranty - Parts 5 Years Warranty - Labor 5 Years Product Shipping Weight (lbs.) 0.1 Speaker Type Tweeter Nominal Diameter .75 Power Handling (RMS) 15 watts Power Handling (max) 30 watts Continuous Program Power -- Impedance 6 ohms Sensitivity 90 dB @ 1W/1m Frequency Response 3 500 - 25 Voice Coil Diameter 19 mm Magnet Weight -- DC Resistance (Re) 5.2 ohms Voice Coil Inductance (Le) 0.05 mH Resonant Frequency (Fs) 2 005 Hz Mechanical Q (Qms) 1.5 Electromagnetic Q (Qes) 2.88 Total Q (Qts) 0.99 Diaphragm Mass Inc. Airload (Mms) -- Moving Mass Of Diaphragm (Mmd) -- Mechanical Compliance of Suspension (Cms) -- Surface Area Of Cone (Sd) 2.8 cm² Volume of Displacement (Vd) -- BL Product (BL) -- Compliance Equivalent Volume (Vas) -- Maximum Linear Excursion (Xmax) -- Drivers Mechanical Losses (Rms) -- Cone / Diaphragm Material Textile Soft Dome Entry / Exit Diameter -- Surround Material -- Voice Coil Wire Material Copper Voice Coil Former Aluminum Basket/Frame Material -- Magnet Material Neodymium Overall Outside Diameter 45 mm Overall Depth 15 mm Baffle Cutout Diameter 33 mm Mounting Hole Diameter -- Bolt Circle Diameter -- Product Weight -- Cone / Dome Diameter 3/4.