E-commerce Search Demo
AI Assisted Filters
Parameters
Query:
Category filters: All
AI Assist: ON
Page: 1
Products
Time taken: 3 Max score: 1000.000 Total hits: 600 Full time: 0.0 s
Showing 1-10 of 600 products
![]() B005ZXAR7S Availability: Currently unavailable Score: 1000.000 Category: Tools Rating: 4 Votes: 2 Find similar productsTrojan Masonry Sealer - 15 YR WARRANTY - Made in USA - 1 Gal. A penetrating polyester formula that permanently waterproofs and preserves concrete, brick, stucco and all masonry surfaces with only one application. It is non-flammable, non-toxic and non-caustic. As Trojan has very low VOC (volatile organic compounds) it can be used safely inside as well as outside on new or old masonry. Trojan dries clear with no sheen and comes with a Ten Year Waterproofing Warranty. Made in USA. | ![]() B0C4ZGFYHX Price: $26.29 Score: 9.346 Category: Tools Rating: 4.3 Votes: 533 Find similar productsEco Advance Concrete/Masonry Siloxane Waterproofer Concentrate - Makes 1 Gallon. 16 ounce container of concentrate makes 1 gallon of commercial-grade water proofer when mixed with clean water. this easy-to-use spray-on formula provides long-lasting protection for virtually any concrete/masonry surface including: concrete, brick, masonry, natural stone, artificial stone, pavers, stucco, split-face block, etc. This product differs from most water proofers because of its vapor transmission abilities which allow for long-term product and substrate performance. this allows substrates to still cure and prevents moisture from being trapped which can lead to a rapid degradation of the substrate. |
![]() B07CZ5K7Z4 Price: $54.98 Score: 9.009 Category: Tools Rating: 4.3 Votes: 172 Find similar productsDurable Water Repellent Penetrating Sealer: Concrete Driveways, Brick, Masonry, Pavers. Protects Surface up to 10 Years. Black Diamond Stoneworks. (1 Gallon). Black Diamond Stoneworks Durable Water Repellent is innovative, penetrating heavy duty hard surface sealer that will protect all hard surfaces from the damaging effects of water penetration, from wind-driven rain, saltwater, pool water with chemicals or anywhere you have water or moisture. Use on all hard surfaces including, concrete, grout, stucco, split-faced block, brick, pavers, man-made stone, natural stone etc. May darken some surfaces. Always Test in an inconspicuous location to confirm desired results before proceeding. Directions: Apply using a brush, roller or low-pressure pump sprayer. The substrate should be clean and free of any contaminants (dust, dirt, oil, grease, curing compounds, paint/coatings, efflorescence, etc.) before applying Durable Water Repellent. Apply one heavy coat keeping surface wet with the Durable Water Repellent for 3-5 minutes. Wipe surface COMPLETELY dry. DO NOT allow the product to puddle on the surface or it will dry tacky, brush or roll the surface to keep this from occurring. Two coats can be applied wet-on-wet to ensure the best performance and coverage. Wait for approximately 15-20 minutes in between coats. Do not allow second coat to pool or puddle on the treated surface. A minimum of 24 hours should be allowed before treated surface comes in contact with water. Maximum water repellency will occur approximately 48—72 hours after application, depending on the curing conditions. Durable Water Repellent can last up to ten years in some applications but we recommend to re-apply after 5 years to ensure the best results. Coverage: 100-200 sq. ft. per gallon. | ![]() B008LVG5EU Price: $58.99 Score: 8.403 Category: Tools Rating: 2 Votes: 1 Find similar productsStone Technologies Corp Non Gloss Natural Finish Invisible Solvent Based Concrete Brick Paver Sealer X-3S (1 Quart). Concrete Sealer X-3S is a solvent based non-flammable and virtually odorless version of Concrete Sealer X-3. Concrete Sealer X-3S is a special blend of polysiloxanes which cross link below the surface of the concrete making the concrete surface water repellent and stain resistant allowing spills to be removed more easily. Concrete Sealer X-3S can be applied on all types of decorative and stained pavers, aggregate driveways and walkways, bricks, clay tiles, sandstone, limestone, marble, granite, slate and any natural stones. |
![]() B09RQ4PLBN Price: $239.99 Score: 8.333 Category: Tools Rating: 5 Votes: 4 Find similar productsSuper Seal-M Concrete Water Repellent Sealer 5-Gallon, Clear. SuperSeal Brick-M is a water based Silicone Water Repellent made of a special hybrid of Silane and Siloxane. SuperSeal-M provides water repellency to porous construction material such as bricks, stone, concrete blocks, mortar, and grout. It is not suitable for very low-porosity substrates such as polished stone. It will not leave a sheen or wet look. The active ingredients in SuperSeal-M Water Repellent Sealer are a mixture of different-size particles, some larger, some smaller to fill different size voids. This ensures good penetration into porous substrates, resulting in good coverage and durable water repellency. Additionally, the active ingredients in SuperSeal-M Water Repellent can chemically react with the substrate, ensuring long-lasting performance. Water Beads up fast on substrates treated with SuperSeal-M Water Repellent Sealer. The product's excellent water repellent and fast beading action are immediately apparent. What you will not see is any change in the substrates appearance. | ![]() B0118FWCG0 Availability: Currently unavailable Score: 7.692 Category: Tools Rating: 4 Votes: 195 Find similar productsSiloxa-Tek 8505 Ultra Concentrate (1 Gallon Makes 5 GALLONS) - Penetrating Concrete Sealer, Water, Salt & Oil Repellent. . |
![]() B008LVET02 Price: $269 Score: 7.692 Category: Tools Rating: 5 Votes: 2 Find similar productsStone Technologies Corp Water & Stain Repellent, Salt & Chlorine Water Resistant, Fish Ponds, Swimming Pool, Concrete Sealer X-3 5 Gallons. Concrete Sealer X-3 is a water-based special blend of polysiloxanes/silanes which crosslink below the surface of the concrete. This makes the concrete surface water and stain repellent allowing the removal of spills more easily. Application of the sealer is either alone or on top of Concrete Sealer X-1 or Concrete Sealer X-2. This will provide double protection of the concrete with both deep sealing and a repellent finish. Concrete Sealer X-3 is for all types of decorative and stained concrete pavers, concrete aggregate driveways and concrete walkways, bricks, clay tiles, mortar, grout and any natural stones. Use this sealer for above grade plaster and stucco to provide a breathable barrier against water, stains and acids. The sealer will also seal swimming pools and fish ponds to prevent water escaping through the concrete capillaries and pores. It is also used in dog kennels and agricultural institutions to provide stain resistance which assists in the maintenance of these enclosures. This concrete sealer leaves an invisible or natural finish (no sheen) after application and the surface will not be slippery. Concrete Sealer X-3 has also been proven as an effective anti-graffiti barrier. It prevents paints, aerosols and crayons from adhering to the wall and allowing easy removal if they do. Concrete Sealer X-3 is perfect for use in concrete ponds, swimming pools, holding tanks and water features. This sealer is a ready to use sealer and does not require the addition of an activator. This means that it does not have a limited pot life unlike some competitive sealers and it has a shelf life of at least 6 months. | ![]() B008VTP9XU Price: $269 Score: 7.634 Category: Tools Rating: 2.6 Votes: 4 Find similar productsLastiSeal Concrete Stain & Sealer (5-gal.) - Waterproofs & Stains Concrete in One Step! (Dark Grey). Unique, state-of-the-art waterproofing concrete sealer and concrete stain in one! Waterproofs concrete to protect against water, efflorescence, spalling, salts, and freeze-thaw. Spectacular semi-translucent variegated look, similar to acid staining but many more colors. Penetrates deep into concrete (2”-4”), strengthens and waterproofs. It’s like filling the pores with epoxy! Limited 15-year Waterproofing Warranty. No film, not shiny or slippery. Beautify dull outdoor concrete like concrete driveways, sidewalks, patios, and pool decks. Stain indoor concrete floors like in basements, slab-on-grade floors, hallways, dining rooms, lobbies, offices. You can add a glossy clear coating (acrylic, urethane, epoxy) for luster and protection. Environment-friendly – waterborne, no acids, ultra-low VOCs. No strong odors. Easy application with a pump-up garden sprayer. The concrete must be clean, thoroughly dry, and POROUS! The surface should absorb water, not bead. If the surface is too tight, the stain pigments will not penetrate and easily wash off, e.g. hard-troweled concrete, stamped, burnished or polished concrete, fibercrete, previously sealed or painted concrete. New concrete is too caustic - the pH must be below 9 but above 6. We recommend the safe approach – always ACID-ETCH OR SAND the concrete first. After etching, neutralize the surface with baking soda, ammonia, or an alkaline cleaner. Test the stain first in an inconspicuous area, let it cure for three days and try to rub it off with a wet rag – the stain should not come off. Do not over-apply! One application in a thin glistening film is usually enough. A light second application can be applied later, provided it absorbs. THE CONCRETE PREP AND THE APPLICATION ARE THE RESPONSIBILITY OF THE USER. WE CANNOT GUARANTEE THAT THE STAIN WILL PENETRATE. Shipped in two-packs with two 2.5-gall containers. Coverage per 5 gallons … 1,000–1,150 sq. ft. on indoor poured concrete, 750–1,000 sq. ft. on outdoor poured concrete. |
![]() B008DG7WOA Availability: Currently unavailable Score: 7.519 Category: Tools Rating: 2.4 Votes: 2 Find similar productsA-Tech Paver Sealer WB 5-Gallon: Water-Based Acrylic Semi Gloss Wet Look Sealer for Brick, Stone and Masonry Pavers- Low VOC Eco-Friendly Formula. Since 1998 Applied Technologies has supplied the waterproofing industry with quality materials to pros and DIYers. A-Tech Paver Sealer WB is a water-based acrylic sealer that forms a tough wet look semi-gloss sheen. The color of the paver will be darkened and enhanced. This non-yellowing formula is UV resistant. After drying, the pavers are protected from water, oil, grease and water stains. A-Tech Paver Sealer WB can be used on interior and exterior brick, stone and concrete pavers. A-Tech Paver Sealer WB locks the sand around the pavers in place. 50 State legal Low VOC formula is environmentally friendly. | ![]() B00EVYJBGK Availability: Currently unavailable Score: 7.519 Category: Tools Rating: 5 Votes: 3 Find similar productsAnvil 2350 Wet Look Sealer - Super Clear Gloss Acrylic for Interior/Exterior Stained or Uncoated Concrete - 1 Gallon. USAGE: Anvil #2350 ‘Wet Look’ Sealer combines the extra durability and wet look to stained or uncoated concrete for both interior an exterior applications. Water reducible clear ‘Wet Look’ Sealer is non-yellowing and is low odor. Anvil #2350 ‘Wet Look’ Sealer when applied to a properly prepared surface is highly resistant to the effects of hot automobile tires. Anvil #2350 ‘Wet Look’ Sealer is formulated for use on surfaces such as driveways, garage floors, patios, walkways, sidewalks, decks, pavers, un-glazed tile, brick and stucco. Anvil #2350 ‘Wet Look’ Sealer is milky white when applied, but dries to a natural super clear gloss finish. However, Anvil #2350 ‘Wet Look’ Sealer is not intended for use over wood, metal, granite, terrazzo, marble surfaces or other natural stone products. APPLICATION: Hand stir product thoroughly before application. Sealer should be applied in thin multiple coats by brush, roller, pad or spray. Spray application should be back rolled for uniform film thickness. Avoid heavy application resulting in runs, ponding, flood-coating or puddling. Allow four hours drying time between coats. If relative humidity is high ( >80 % ), allow an extra period of drying time between coats. Two thin coats are recommended depending on the surface and the desired gloss. |









