E-commerce Search Demo
AI Assisted Filters
Parameters
Query:
Category filters: All
AI Assist: ON
Page: 1
Products
Time taken: 3 Max score: 1000.000 Total hits: 600 Full time: 0.0 s
Showing 1-10 of 600 products
![]() B00FKFJZM4 Price: $115.03 Score: 1000.000 Category: Tools Rating: 1 Votes: 1 Find similar products(Package Of 2) Pentek PCF1-10MB Deionization Water Filter (9-3/4 x 2-2/3). Water Filter Housings for the Pentek Deionization PCF1-10MB filter: Pentek 155273 PCF1-10MB D.I. Resin filter fits in standard and Slim Line housings for 10 inch Standard water filters. Fits in Culligan / USFilter / Ametek / American Plumber / Pentek10 Standard Water Filter System . .Pentek PCF1-10MB Deionization Filter Cartridge Specs: Dimensions:9-3/4 x 2-2/3 (248 mm x 68 mm) Capacity Grains (mg TDS as CaCO3):270 (17,500) Initial ΔP (psi) @ Flow Rate (gpm): 1.5 psi @ 0.25 gpm (0.10 bar @ .95 L/min) Suggested Flow Rate: 0.25 gpm (0.95 L/min) Temperature Rating: 40?F to 100?F (4.4?C to 37.8?C) Pentek PCF1-10MB Deionization Water Filter Materials of Construction: Filter Media:Mixed bed DI resins End Caps, Shell, Pre-Filter, and Post-Filter:Polypropylene Gasket:Buna-N (Package Of 2). | ![]() B01EK73CPS Price: $9.99 Score: 9.174 Category: Tools Rating: 4 Votes: 5 Find similar productsCompatibel to PX05-9 7/8 5 MICRON SEDIMENT WATER FILTER 2 PACK by CFS. Compatible to PX05-9 7/8 5 MICRON SEDIMENT WATER FILTER 2 PACK by CFS 5 Micron sediment filter that consists of thermally-bonded Polypropylene microfibers that create a strong secure cartridge that traps particles throughout its depth. These fit into housings that use 10 x 2.5 filters for many commercial applications, including portable water filtration, chemical filtration, plating baths and amine filtration. They have high dirt-holding capacity which means longer life and fewer change-outs. True-graded density filters matrix combines efficiency, long life and purity to create a high performance depth filter. Contains no wetting agents, solvents, antistatic agents, or binders. The purity and reliability of these cartridges ensure consistent results on a regular basis. In addition, they incinerate down to trace ash for easy disposal. Specifications: Part Numbers: 93023, PX05 or PX05-9-78 Wide chemical compatibility Contains no wetting agents, solvents, antistatic agents or binders High dirt holding capacity, which means longer life and fewer replacements Nominal Dimensions: 10 L x 2 1/2 Diameter Actual Length: 9-7/8 L x 2 1/2 Diameter Micron Rating: 5 micron High flow rate at low pressure dropNSF-certified to standard 42 Replaces the following: American Plumber WP5 Aqua-Pure AP110 Water Filter Aqua-Pure AP010 Water Filter Bunn S5-10 Water Filter Bunn ED-S-1 Water Filter Cornelius COR120 Water Filter Cornelius COR105 Water Filter P5 Water Filter Cuno CFS110 Water Filter Ecolab 9320-1135 Water Filter DEV910908 Water Filter Flotec P5 155014-43 Water Filter SDC-25-1005 Water Filter Liquatec SDF-25-1005 Water Filter Manitowoc K-00173 Water Filter Manitowoc K-00069 Water Filter NuCalgon 4712-87 Water Filter P5 Water Filter Puremark PFS105 Water Filter Selecto 101-230 Water Filter Shurflo 15-052-00 Water Filter Shurflo SF31-SEDS Water Filter Valuetrex VX05-978 Water Filter Any brand names or logos are the registered trademarks of their respective owners. Any use of. |
![]() B00FKFOAQ0 Price: $122.03 Score: 8.850 Category: Tools Rating: 5 Votes: 1 Find similar products(Package Of 4) Pentek DGD-5005-20 Sediment Water Filters (20 x 4.5). Pentek DGD-5005-20 Water Filter Replacement Information: The Pentek DGD-5005-20 water filter is easy to install in whole house systems or commercial water filter systems. Replace the Pentek DGD-5005-20 sediment water filter cartridge every 2 months or 8,000 gallons of water. The filter change interval also depends on your water supply and water usage. Pentek DGD-5005-20 Water Filter Housings: For use in Ametek, US Filter, Culligan 20 Big Blue housings. The following Culligan, Ametek, USFilter, and Plymouth Products model holds the Pentek DGD-5005-20 sediment water filter cartridge: #20 Big Blue. The Pentek DGD-5005-20 Sediment Water Filter Cartridge also fits Cuno AquaPure, Omni, Sears, Fulflo, Teledyne Water Pik, Ace, Master Plumber, Flotec, Honeywell, General Electric, American Plumber, and most other water filter housings for 20 x 4.5 filters. . .Pentek DGD-5005-20 Water Filter Specs: Type:Dual Gradient Density Dimensions:20 x 4 1/2 (254 mm x 114 mm) Pre-Filter Rating (Nominal):50 Post-Filter Rating (Nominal):5 Temperature:40?F to 145?F (4.4?C to 62.8?C) Initial ΔP (psi) @ Flow Rate (gpm):DGD Series Dual Layer Filters Comparison ChartWATER FILTER MODELS RATING (Nominal)10 x 4.5 20 x 4.5 Pre-Filter Post-FilterDGD-2501 DGD-2501-20 25 Fine 1 Extra-FineDGD-5005 DGD-5005-20 50 Medium 5 Medium-FineDGD-7525 DGD-7525-2075 Coarse 25 Fine (Package Of 4). | ![]() B00KUW2J5W Price: $216.99 Score: 8.333 Category: Tools Rating: 5 Votes: 3 Find similar products6 pk Pentek 155273-43 PCF1-10MB Mixed Bed Deionization Resin Water Filter Cartridge, 10 x 2-1/2. . |
![]() B0057FSNJ8 Price: $41.79 Score: 8.000 Category: Tools Rating: 4.1 Votes: 3 Find similar productsPentek RFC-93 Radial Flow Water Filters - 9-.75 in. x 2-.75 in. Radial Flow Carbon Water Filter Cartridges RFC-93 filters produce healthier, better-tasting drinking water Provides effective chlorine taste & odor reduction (based on manufacturer's internal testing) Unique design reduces carbon fines.This RFC-93 cartridge filter offers sediment-filtration, as well as taste , odor, and chlorine taste and odor reduction in one product. 1 GPM flow rate. Pentek RFC-93 provides effective chlorine taste Pentek RFC-93 filter media: Granular Activated Carbon Pentek RFC-93 dimensions: 9 3/4 x 2 3/4 Pentek RFC-93 flow rate: 0.60 psi at 1 gpm Pentek RFC-93 fits housings that hold 10 water filters Pentek RFC-93 temperature rating 40 to 125 degrees Fahrenheit NSF International Tested and Certified. | ![]() B07GPP1ZZF Availability: Currently unavailable Score: 7.634 Category: Tools Rating: 5 Votes: 1 Find similar productsPentek RFC20-BB Carbon Filter Cartridge, 20 x 4-1/2 (Pack of 2). This Pentek RFC20-BB carbon filter cartridge reduces chlorine taste and odor in residential and commercial drinking water. It is made of granular activated carbon (GAC) media with a spun polypropylene core and polypropylene end caps for strength, and there is a nitrile butadiene rubber (Buna-N) gasket to ensure a watertight seal. The filter has a porous polyethylene 70-micron outer shell to reduce carbon fines and other suspended particles in the filtered water. It will reduce free available chlorine (FAC) at 2 parts per million (ppm) by at least 75% in up to 70,000 gallons at a flow rate of 4 gallons per minute (gpm). The filter has an initial pressure drop of 0.90 pounds per square inch (psi) at a recommended flow rate of 4 gpm, and operates over a temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C). This carbon filter cartridge is used for treatment of residential and commercial drinking water. |
![]() B00JXCAAME Availability: Currently unavailable Score: 7.576 Category: Tools Rating: 4.6 Votes: 8 Find similar productsPurenex 2PP-10,1MIC 1 Micron Sediment Filtration Replacement Cartridges, 2-Pack. Product Description Product Description This is a 2 filters set for a standard Reverse Osmosis Water Filtration Unit or any type of Water Filtration Unit with 10 housing. The specifications of the set are as follows: 2 of Melt-blown Polypropylene Sediment filters - Sediment filter is often the first filter installed in the Reverse Osmosis circuit. Sediment filters are made of fine melted polypropylene, which is then blown and spun in a cylinder-like form. The main function of a sediment filter is to remove large and fine particles from a drinking water, such as sand, dirt, silt and rust particles. Removal of such particles allows for a better performance of all the following filters, such as Carbon Block or GAC filters. Micron rating: 1 Micron. Dimensions: 9.75 x 2.5 Lifetime: Replace two or three times a year, depending on the water quality.. All Filters are individually wrapped and sealed. All filters meet NSF Standards and Regulations. Filters will fit any Residential Reverse Osmosis Unit that features standard 10 filter housing. From the Manufacturer This is a 2 filters set for a standard Reverse Osmosis Water Filtration Unit or any type of Water Filtration Unit with 10 housing. The specifications of the set are as follows: 2 of Melt-blown Polypropylene Sediment filters - Sediment filter is often the first filter installed in the Reverse Osmosis circuit. Sediment filters are made of fine melted polypropylene, which is then blown and spun in a cylinder-like form. The main function of a sediment filter is to remove large and fine particles from a drinking water, such as sand, dirt, silt, and rust particles. Removal of such particles allows for a better performance of all the following filters, such as Carbon Block or GAC filters. Micron rating: 1 Micron. Dimensions: 9.75 x 2.5 Lifetime: Replace two or three times a year, depending on the water quality.. All Filters are individually wrapped and sealed. All filters meet NSF Standards and Regulations. Filters will fit any Residential Reverse Osmosis Unit that features standard 10 filter housing. | ![]() B00MPQKID6 Price: $16.31 Score: 7.576 Category: Tools Rating: 4.2 Votes: 30 Find similar productsPentair Pentek CFBC-10 Carbon Water Filter, 10-Inch, Under Sink Modified Molded Fibredyne Carbon Block Replacement Cartridge, 10 x 2.5, 0.5 Micron. Pentair Pentek CFBC-10 Carbon Water Filter, 10-Inch, Under Sink Modified Molded Fibredyne Carbon Block Replacement Cartridge, 10 x 2.5, 0.5 Micron. Pentair Pentek CFBC-10 Carbon Water Filter fits all 10 standard housings and can replace any 10 x 2.5 carbon filter cartridge. Pentair Pentek CFBC-10 is HIGHLY EFFECTIVE at reducing chlorine taste & odor, bad taste and odor, as well as other contaminants for cleaner, clearer, better-tasting water. It has a PROPRIETARY FIBREDYNE TECHNOLOGY which creates a unique filter media that offers the benefits of both a sediment filter and a carbon block into a single cartridge. Pentair Pentek CFBC-10 has additional benefits which include low pressure drop over the life of the cartridge and up to 3X the chlorine taste & odor and dirt holding capacity of traditional carbon blocks. This product has 20,000 GALLON CAPACITY you can replace every 4-5 months or when you notice a drop in water pressure or water quality. |
![]() B097CMSW55 Price: $8.88 Score: 7.463 Category: Tools Rating: 4.7 Votes: 67 Find similar productsPentair Pentek CW-50 Sediment Water Filter, 10-Inch, Under Sink Polypropylene String-Wound Filter Cartridge, 10 x 2.5, 50 Micron. Pentair Pentek CW-50 Sediment Water Filter, 10-Inch, Under Sink Polypropylene String-Wound Filter Cartridge, 10 x 2.5, 50 Micron. Keep your water clean and protect your appliances by removing dirt, sand, silt and particulates. It fits all 10 housing and can replace any 10 x 2.5 sediment filter. Economical solution to reduce fine sediment, including sand, silt, rust and scale particulates. Durable polypropylene cord wound around a rigid polypropylene core in a standard pattern. Suitable for wide range of sediment filtration applications, including municipal and well water as well as many industrial fluids. | ![]() B00BVY6WXS Price: $9.75 Score: 7.463 Category: Tools Rating: 2 Votes: 1 Find similar products10x2.5 1 Micron Grooved Sediment Melt Blown Filters Cartridges (Compatible Replace Aqua-Pure AP1001, Aqua-Pure AP109, Watts FPMBG-1-975). This cartridge replaces: Flow-Pro FPMB10-978 GE Hytrex GX10-10 GE Osmonics MB-10-10 (Part# 1013241) GE Purtrex PX10-10 GE Selex SXA-10 Pentek PD-10-934 Industry Standard Size 10 × 2.5 Sediment Cartridge Features and Benefits Gradient Density, Multi-Layered, Melt Blown Sediment Filter Cartridge. Larger particles are trapped in the outer layers, smaller particles penetrate deeper. Greater dirt holding ability and longer life than non-layered cartridges. Thermally bonded polypropylene micro fibers for purity and chemical compatibility Contains no binders, agents, solvents, antistatic materials or wetting agents Meets FDA requirements for food and beverage contact No leachables or extractables to contaminate No surface binders to reduce flow and increase change-out frequency Cartridges are individually shrink wrapped Micron rating is molded into cartridge Available in wide range of lengths and micron ratings Applications Whole House Sediment Filtration Reverse Osmosis Prefiltration Food and beverages Oil and gas Fine chemicals Electronics Metal finishing Pulp and paper Melt Blown Sediment Filters in all standard 10, 20, and big blue sizes. Available with nominal micron ratings of 0.5, 1, 5, 10, 20, and 50. Ideal for aggressive chemicals and general filtration requirements when depth filtration is required. Each cartridges is individually shrink wrapped. These filters are designed for the removal of dirt, rust and sediment from water. 5 and 20 micron are the most popular sizes for drinking water applications. Consider using a 20 micron cartridge first and then stepping down to a 5 micron cartridge. Cartridges rated for temperatures up to 125 °F. Polypropylene construction for excellent chemical resistance. No binders, additives, or lubricants to leach into the water. 5 GPM max flow rate for 5 micron cartridge, 9-3/4 × 2-1/2 OD. *Depth filtration chart and diagram to right refers to LF-PP gradient density cartridges only. |









