FantasticSearch | E-commerce Search Demo

Scroll to: Top Results

E-commerce Search Demo

AI Assisted Filters

Positive filters:

Negative filters:

Category filter:

Parameters

Query:

Positive filters:

Negative filters:

Category filters: All

AI Assist: ON

Page: 1

Products

Time taken: 3 Max score: 1000.000 Total hits: 100 Full time: 0.0 s
Showing 1-10 of 100 products

B00N0RIEQ2 Availability: Currently unavailable Score: 1000.000 Category: Electronics Rating: 4.1 Votes: 9 Find similar products Semlos Esata Ii Sata Ii IDE 3.5 to Pci-e Pci Express Card Adapter Converter Jmb363 Cd-ROM Drive to Turn The Mainboard. ATA 66/100/133 IDE full support SATA support Serial ATA 1.0 and Serial ATA 2.0 specifications SATAII support Native Command Queue (NCQ) Hookup to support Hot Plug (Hot plug-in) Support RAID 0, RAID 1, RAID 0 + 1 and JBOD Ultra ATA full support Ultra DMA mode 0 to 6, the DMA mode 0-2 and PIO mode 0 to 4 Ltra ATA transfer rate of up to 133 MB/SEC, SATAII transfer rate of up to 3.0 Gb/s support more than 160 Gb hard drive Provide RAID Configurer tool software, support RAID 0 RAID 1 RAID 0 + 1 JBOD array pattern Support se Windows 98/98 / ME / 2000 / XP MAC OS.	B017VQSU5W Availability: Currently unavailable Score: 9.901 Category: Electronics Rating: 5 Votes: 11 Find similar products Ableconn SAT-IDE40 IDE Device to SATA Motherboard Mini Vertical Adapter - IDE PATA to SATA Motherboard Converter. The Ableconn SAT-IDE40 allows you to install an existing IDE drive to the newer SATA host controller. It's the easiest and cost effective solution to keep existing IDE/ATAPI devices to work with newer motherboards or systems without legacy IDE interface. Features * Connector: - 1 x IDE (40-pin, PATA) Female (direct attach to IDE drive) - 1 x SATA (7-pin, Data) (to be connected with a SATA cable to motherboard) - 1 x SP4 (4-pin; small drive power) Male * Chipset: Silicon Image SiI3811 * Data transfer rate: - Up to 133MBps * Software: - OS independent; No driver installation required - Support Windows, Macs, and Linux * Supports and attaches any type of ATAPI, ATA/133, ATA/100, ATA/66, ATA/33, EIDE and IDE storage device (DVD, DVD-RAM, MO, CD-ROM, CD-RW, Hard Disk, ….) * 48 bits LBA can Break Capacity-Limit to Support HDD larger than 137GB * Mini vertical Board * Compliant with Serial ATA 1.0a specifications * SATA transfer rate 1.5Gbps * Supports Spread Spectrum in receiver * Compliant with ATA specifications * Compatible with Ultra ATA 133 * Automatically decode the ATAPI command to know the UDMA direction. * Bootable. Plug and Play and Hot swappable. The device can be removed and added without system shutdown or reboot. * Fully RoHS compliant * Made in Taiwan Package Contents * Ableconn SAT-IDE40 IDE Device to SATA Adapter * 1 x Y Power Cable (LP4 Molex to LP4 +SP4).
B000GPMJ7Q Availability: Currently unavailable Score: 9.259 Category: Electronics Rating: 3.7 Votes: 5 Find similar products IDE to SATA Converter - Converts IDE Drive to SATA Interface. Connect a IDE hard drive to your motherboard's SATA controller with this A-SATA2IDE-20330 IDE to SATA converter! It features the JMicron JM20330 chipset and supports 3.5 IDE hard drives and 5.25 optical drives. It's compliant with IDE specification and supports up to UDMA/133 drives! Get your A-SATA2IDE-20330 IDE to SATA converter today!.	B07H8W568W Price: $12.99 Score: 8.333 Category: Electronics Rating: 4.4 Votes: 17 Find similar products Mini PCI-e mSATA SSD to IDE 2.5 5V 44pin Adapter Card. Application : PA6008B sintech mSATA SSD to 44pin IDE adapter connects mini pci-e Msata SSD as 2.5 IDE HDD. It may be used in any application where 2.5 IDE SSD drive may be used: 1. Notebook, except some for IBM laptop. 2. MIDTablet PC 3. Internet Appliances 4. Kiosks 5. Industrial Computers 6. Routers 7. Firewalls Support Storage Device : for Intel mSATA series SSD and compatible Storage Device for Samsung PM800 series SSD and compatible Storage Device for Toshiba mSATA SSD and compatible Storage Device Package included: 1 X Adapter Card.
B0009E65GA Availability: Currently unavailable Score: 8.197 Category: Electronics Rating: 2.6 Votes: 10 Find similar products Sabrent SBT-SRD2 Silicon Image Serial ATA 2-Port RAID PCI Controller Host Card Adapter. Product Description SABRENT SBT-SRD2 Serial ATA (SATA) 2 Port RAID PCI Controller Host Card Add 2 internal SATA Ports to your computer! Add Reliable 1,500Mbps of Serial ATA 2 Ports and RAID 0, RAID 1 to your system This PCI Host Adapter can upgrade your desktop computer to have dual Serial ATA RAID Channels. The board provides a 32bit, 33/66 MHz PCI interface on the host side and dual, fully compliant Serial ATA ports on the device side to access Serial ATA hard disk drive. Striping (RAID 0) and Mirroring (RAID 1) improve the data performance and provide the data redundancy. Specifications: Provides 2 Brackets to Support Low profile PCI and Regular size PCI in one card Breaks Capacity-Limit to Support HDD larger than 137GB Dual high speed Serial ATA interface ports, each supporting 1st generation Serial ATA data rates 1.5Gb/s Fully compliant with Serial ATA 1.5G specifications Provides RAID 0 (Stripping) to greatly increase the performance of data transfer by simultaneously writing data to 2 drives Provides RAID 1 (Mirroring) to protect the data from a disk failure by writing identical data on 2 drives Supports Spread Spectrum in receiver Independent 256-byte FIFOs (32 bit * 64 deep) per Serial ATA channel for host reads and writes Compliant with PCI Specification, revision 2.2 Integrated PCI DMA engines 32 bit, 33/66MHz fully compliant PCI host interface Complete with drivers for Windows 98, Windows Millennium, Windows NT 4.0, Windows 2000 and XP Acts as NON-RAID when not BIOS configured RAID RAID 0 PERFORMANCE Supports RAID 0 (striped), RAID 1 (mirror) Supports co-exist RAID set and Non-RAID HDD Allows HDDs with different sizes to be configured in a RAID set Requirements: Pentium or equivalent PC with one available 32-Bit PCI slot Windows 98SE / Me / NT4.0 / 2000 / XP/NT 4.0, Windows Server 2003, Linux, Novell Netware Package Content: Serial ATA 2 Port RAID PCI Controller Card Drivers on CD Quick Installation guide Amazon.com With the Sabrent SBT-SRD2 Silicon Image Serial ATA 2-Port RAID PCI Controller Host Card Adapter, it is easy to add Serial ATA (SATA) ports and RAID 0 and RAID 1 to your system. The card provides a 32-bit 33/66 Mhz PCI interface on the host side and two fully compliant Serial ATA ports on the device side. This permits you to connect two SATA drives for RAID 0 (striping) and RAID 1 (mirroring). RAID 0 increases performance by writing data to multiple drives simultaneously and RAID 1 protects data from failure by writing data to both drives so there is a backup in case one drive fails. Hard drives larger than 137 GB are supported and the Serial ATA interface has transfer rates of 1.5 Gbps. The card requires Windows 98SE, Windows ME, Windows NT 4.0, Windows 2000, Windows XP, or Windows Server 2003, or Linux or Novell Netware. Drivers for Windows operating systems are included. What's in the Box SBT-SRD2 serial ATA 2-port RAID PCI controller host card adapter, low profile PCI bracket, drivers CD-ROM, quick installation guide.	B00LM3HW5K Availability: Currently unavailable Score: 8.130 Category: Electronics Rating: 2.5 Votes: 2 Find similar products SATA III 3 to M.2 (NGF) SSD Converter Adapter Connector Card. Description: AD905A is SATA III to M.2(NGFF) Storage adapter, providing one 7+15pin connector on the host connection and one 67pin B key M.2 connector on the SSD storage devices connections. When assembled, it can operate in a variety of operating systems. Such as DOS, Windows 95, 98, XP, 2000, Vista, Win 7, Linux, Unix, and so on. AD905A adapter allows the installation of SSD as system disk, boot the operating system directly, without having to install any drivers, but does not affect the execution speed of the SSD storage devices. Features: Brand new and high quality. Size:10.5cm x 4.5cm x 0.5cm-4.13inch x 1.77inch x 0.19inch. Suport the following form factor M.2(NGFF) SSD: Type 2230-D2-B-M: 30mm(L) x 22mm(W) Type 2242-D2-B-M: 42mm(L) x 22mm(W) Type 2260-D2-B-M: 60mm(L) x 22mm(W) Type 2280-D2-B-M: 80mm(L) x 22mm(W Package Included: 1 x SATA 3 to M.2 NGF SSD Adapter NO Retail Box. Packed Safely in Bubble Bag.
B000YAX13Y Price: $22.79 Score: 7.874 Category: Electronics Rating: 4.5 Votes: 322 Find similar products StarTech.com 1 Port PCI Express IDE Controller Adapter Card - Storage Controller - ATA - 133 MBps - PCIe x1 (PEX2IDE). This PCI Express IDE Controller Adapter Card provides a cost-effective way to use legacy drives with modern computers, by converting a PCI Express port into an IDE port. Providing data burst transfer rates of up to 133MBps and support for PIO 0/1/2/3/4 and UDMA 33/66/100/133 operating modes, the IDE controller card offers an efficient way to add an IDE channel with support for two IDE drives on the same channel. A complete dual profile solution, the PCI Express IDE controller card provides both standard and low profile brackets for adapting to slimline or small form factor system applications.	B08BZD978H Availability: Currently unavailable Score: 7.813 Category: Electronics Rating: 3.9 Votes: 24 Find similar products JMT 39 Pin IDE to SATA Connector SATA IDE Adapter 3.5 HDD IDE/PATA Hard Disk Adapter Converter Card with Data Power Cable. Specification: Product size: 62.2CM Product village materials: using PCB double-layer circuit board Scope of use: used for IDE optical drives, burners, 3.5-inch hard drives, recorder hard drives Compatible system: compatible with windowsXp\win7\win8 32-bit\64-bit system Features: 1.Transform the IDE hard disk of the recorder to SATA and connect it to the SATA port of the motherboard. 2. Convert 3.5-inch IDE hard disk to SATA, and connect it to the SATA port of the motherboard 3. IDE optical drive to SATA, connected to the motherboard SATA port 4. Transfer the IDE burner to SATA, then connect it to the SATA port of the motherboard 5. You can transfer the desktop 3.5-inch IDE hard disk to the SATA recorder (please format the hard disk on the computer first). 6. The transferred hard disk can be used as a master disk or a slave disk (need to reinstall the system, refresh in BIOSS, etc.). 7. The transferred optical drive can be used as a system. 8. The adapter card supports a parallel port hard disk with a maximum capacity of 1000G. 9. For IDE devices that use adapter cards, the jumper cap must be inserted in the MASTER position. 10. Compatible with SATA 1 generation, SATA 2 generation, SATA 3 generation 11. Plug and play, no driver required Packsge list: IDE to SATA adapter card 1 Power cord * 1.
B00Y8NQ3W4 Availability: Currently unavailable Score: 7.752 Category: Electronics Rating: 2 Votes: 1 Find similar products SEDNA - PCI Express 2 Port USB 3.0 + 1 Port PeSATA Adapter with Low Profile Bracket - (NEC/Renesas uPD720202 chipset) - SATA Power Connector. Features and specifications : 2 x USB 3.0 Port support transfer speed up to 5Gbps (1 external + 1 internal) 1 x PeSATA / USB 2.0 Combo Port (External) Low Profile bracket to fit HTPC or slim PC case USB 3.0 : Support Windows 8 UASP No driver needed for Windows 8 (do not install driver in Windows 8) Fully compliant with PCI Express Base Specification Revision 2.0 Single-lane (x1) PCI Express Throughput Rates Up to 4.8Gbps Compliant with Universal Serial Bus 3.0 Specification Revision 1.0 Fully compatible with USB2.0 , USB 1.1 Transfer Rate: 5Gbps 480Mbps, 12Mbps NEC uPD720202 Chipset Built-in SATA Power Connector PeSATA : This 2 ports can be connected as eSATA, PeSATA, or USB 2.0. Combine with our Power over ESATA cable (not included in package) , both 2.5 and 3.5 HDD can be supported without power supply from other sources. Specifications : Connect direct to SATA Hdd Data transfer up to 6Gbps (SATA III, depends on your mother board SATA port specification), and 480Mbps (USB 2.0) Supports WinXP, Win Vista and windows 7/8 Package contents : 1 x PCIE USB 3.0 / PeSATA adapter 1 x Driver CD 1 x Low Profile bracket.	B002R0DZWG Availability: Currently unavailable Score: 7.634 Category: Electronics Rating: 2.5 Votes: 3 Find similar products Syba 2 x ATA/133 IDE PCI ITE Chipset SY-PCI45004. Compliant with UDMA 5 ATA/100 or UDMA 6 ATA/133 Specification. Compliant with ATA/ATAPI-5 or ATA/ATAPI-6 Specification. Supports maximum data transfer rate of 100MB/s or 133MB/s. Compliant with PCI Specification Revision 2.1 & 2.2. Compliant with PCI IDE Controller Revision 1.0. Compliant with Programming interface for Bus Master IDE Controller Revision 1.0. Two independent Ultra ATA channels with 128/256 bytes buffer per channel. Connect up to four IDE/ATA devices (coexist with On-board IDE ports), ATA-2, IDE and ATAPI devices. Supports Ultra and Multi-Word DMA timing modes. Enhanced data integrity of transferred data with CRC (Cyclical Redundancy Check) protection and verification. Built-in 80pin detect circuitry.