FantasticSearch | E-commerce Search Demo

Scroll to: Top Results

E-commerce Search Demo

AI Assisted Filters

Positive filters:

Negative filters:

Category filter:

Parameters

Query:

Positive filters:

Negative filters:

Category filters: All

AI Assist: ON

Page: 1

Products

Time taken: 3 Max score: 1000.000 Total hits: 600 Full time: 0.0 s
Showing 1-10 of 600 products

B0158W3R86 Price: $24.98 Score: 1000.000 Category: Tools Rating: 4.8 Votes: 47 Find similar products Last4Ever Tip Tool - Nickel. FREE $6.95 LEATHER SHAFT BURNISHER WITH EVERY ORDER Last 4 Ever Tip Tool - Nickel Radius Each tip tool starts as a machined blank cut from a solid piece of bar stock Aluminum. A medium grit abrasive is applied to the concave radius for the tip Shaper, heavy grit abrasive is applied to the flat base to be used as the Scuffing surface and a finer grit abrasive is applied to the Mushroom Repair surface. Finished cow hide is then applied to the remaining surface to be used to Burnish the tip sides following mushroom repair. The burnishing adds to both the appearance and performance of the tip as it hardens the side surface. After glueing, the tools are pressure clamped in a press to provide for superior adhesion. Additional information and instructional videos are available at last4ever web site Also available in Dime radius and a Dual radius tool with both Nickel and Dime radius.	B0765BQYWJ Price: $11.99 Score: 5.650 Category: Tools Rating: 4.3 Votes: 153 Find similar products JC Performance - Hollow Hole Punch Leather Belt Gasket Craft Metal Rubber Vinyl Plastic Tool (9 Pc). 9PC HOLLOW HOLE PUNCH (HEAT TREATED CARBON STEEL) USED FOR: LEATHERCRAFT & TOOLING, TO MAKE CUSTOM GASKETS, WOODCRAFT, LIGHT GAUGE COPPER CRAFT, EYELET SETTING, FLAG MAKING, TARP AND SCREEN REPAIR, INTERIOR AUTOMOTIVE TRIM, ETC. SOME MATERIALS INCLUDE: LEATHER, RUBBER, NYLON, PLASTIC, CARD STOCK, PAPER, WOOD, FABRICS, SCREEN, LIGHT GAUGE SHEET METAL (IE COPPER & ALUMINUM) AND MANY OTHER MATERIALS KNURLED GRIPS KNURLED GRIPS CARBON STEEL CARBON STEEL HARDENED/HEAT TREATED FOR EDGES THAT STAY SHARP HARDENED/HEAT TREATED FOR EDGES THAT STAY SHARP SPUN AND GROUND FROM SOLID STOCK NOT CAST SPUN AND GROUND FROM SOLID STOCK NOT CAST PROVIDES UNIFORM CLEAN HOLES EVERY TIME PROVIDES UNIFORM CLEAN HOLES EVERY TIME FLUTED FOR EASY DISCHARGE OF WASTE FLUTED FOR EASY DISCHARGE OF WASTE NO NEED TO CLEAN OUT EACH TIME, YOU CAN KEEP ON PUNCHING WITHOUT STOPPING NO NEED TO CLEAN OUT EACH TIME, YOU CAN KEEP ON PUNCHING WITHOUT STOPPING 9DIFFERENT SIZES 9DIFFERENT SIZES EACH PUNCH MARKED BY SIZE EACH PUNCH MARKED BY SIZE INCLUDES 2.5mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm INCLUDES 2.5mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm USAGE: 1. IT'S BEST TO USE A MEDIUM DENSITY PIECE OF WOOD OR PLASTIC AS A BACKER. TO PROTECT YOUR WORK SURFACE AND EXTEND THE LIFE OF THE TOOL. 2. GENTLY SCORE A CIRCLE USING THE PUNCH (TWIST CLOCKWISE AND COUNTER CLOCKWISE) MAKE SURE THIS IS WHERE YOU WANT YOUR HOLE 3. HIT THE BUTT OF THE HOLE PUNCH WITH A STANDARD HAMMER 4. SOME MATERIALS WILL REQUIRE A HARDER BLOW THAN OTHERS. VERY EASY TO USE.
B07JVVTS1B Price: $36.5 Score: 5.495 Category: Tools Rating: 4.7 Votes: 3 Find similar products StewMac No-Chip Tuner Hole Countersink. New and improved! Much sharper for a cleaner cut and better results. Install tuner bushings without chipping the finish Tuner bushings need a snug fit, and that can create a problem: pressing in the bushing forces the surrounding lacquer to lift up and chip away. The solution is simple: ever-so-slightly cut away the lacquer around the peghole, then press the bushing in. That's what the No-Chip Countersink does: it's a precision cutter that removes just the right amount of finish. Typical countersinks have one or two cutting edges and they chatter and gouge the wood. This reamer features two dozen tiny cutters with a smooth, controllable action. It's a quick and delicate operation, and you don't even need a drill: turn the bit with your fingertips. Protects the finish around any screw hole The No-Chip Countersink also cleans up holes for mounting screws and body bushings. Use it when installing string trees or cover plates. It was designed by Don MacRostie, in the StewMac R&D Department. How to use the No-Chip Countersink Use your fingertips; no drill is needed. Use your fingertips; no drill is needed. Only bevel the edge by a few thousandths of an inch. Look closely at your bushing and be sure that the bevel you create will be hidden by the flange. Only bevel the edge by a few thousandths of an inch. Look closely at your bushing and be sure that the bevel you create will be hidden by the flange. Center the reamer in the peghole and rotate by 1/4 turn or less; the cutters are sharp and work fast. Center the reamer in the peghole and rotate by 1/4 turn or less; the cutters are sharp and work fast. Dimensions: 24 cutters at a 45-degree angle 24 cutters at a 45-degree angle Shank: 1/4 (25.4mm) Shank: 1/4 (25.4mm) Diameter: 0.600 (15.24mm) Diameter: 0.600 (15.24mm) Length: 1.555 (39.50mm) Length: 1.555 (39.50mm) Hardened steel.	B001BNTIRG Availability: Currently unavailable Score: 5.348 Category: Tools Rating: 3.9 Votes: 18 Find similar products SE 2 Mushroom Polishing Muslin Buff with 1/4 Shank - CBM202S. The SE 2 Mushroom Polishing Muslin Buff with 1/4 Shank is ideal for smoothing out rough surfaces and polishing flat, interior, and irregular surfaces. Our 2 mushroom shaped polishing buff has a 1/4 round diameter shank that continues with a hex shape so it does not slip on your drill. It is great for polishing multiple surfaces including aluminum, ceramics, jewelry, plastic, stainless steel, and more. The multiple layers of muslin material polishes hard-to-reach areas with each rotation. The muslin is a flexible and soft material that is perfect for final finishing work. Our muslin buff can conform to whichever type of piece you are polishing as pressure is applied, making it perfect for items with contoured edges and curves. SE is committed to providing the customer with the best source for value possible on the market. You will enjoy the quality, function and usefulness of our SE 2 Mushroom Polishing Muslin Buff with 1/4 Shank. IPR Rights Notice: Important: Avoid getting counterfeit items. Genuine SE products come with the SE logo on the packaging. SE is a registered trademark protected by US Trademark Law.
B00365FCLI Availability: Currently unavailable Score: 5.348 Category: Tools Rating: 5 Votes: 2 Find similar products American Carbide Tool Carbide-Tipped Pointed Nose Utility Tool Bit, Neutral, C2 Grade, 0.5 Square Shank, D 8 Size. The American Carbide Tool D-style C2 grade carbide-tipped brazed pointed nose utility tool bit has a neutral cutting direction and a pointed tip with an 80-degree angle for light turning, undercutting, chamfering, and boring on cast iron and nonferrous materials. The D-style, also called pointed nose, tool shape has a positive, 7-degree rake angle that provides a sharp edge for making continuous cuts and a neutral cutting direction for right-to-left or left-to-right feed. The tool has a C2 grade uncoated carbide tip, which provides good resistance to shock and wear for machining on cast iron and nonferrous materials. Carbide is harder than high-speed or cobalt steel, making it more wear resistant at high speeds and providing longer tool life. The tip is brazed to a square steel shank that fits square toolholders. Brazed tools, often called single-point brazed carbide-tipped tools, are used for metal shaping on lathes or screw machines. These single-point tools have a cutting edge at one end that is a carbide tip brazed to a steel shaft. They come in multiple geometry styles for cutting different shapes and are identified by a lettering standard that conforms to American National Standards Institute (ANSI) B212.1 specifications. The tool has a side cutting edge and end cutting edge, with the tool shape style defining which cutting edge is principal and auxiliary. Brazed tools are available in three hand options: right, left, and neutral. A right-hand tool has its principal cutting edge on the right side of the tool to feed into the workpiece from right to left, a left-hand tool feeds into the workpiece from left to right, and a neutral-hand tool will cut either left to right or right to left. The side cutting and end cutting edge angles, in combination with the angle at which the tool is positioned in relation to the workpiece (also called the lead angle), influence the tool's cutting shape and action. Rake angles are the degree of inclination of the face toward or away from the cutting edge. They may be positive for sharp, continuous cuts, negative for heavy, interrupted cuts, or neutral for a true 90-degree cut. The tip, or nose, of the tool performs the finish cut on the workpiece. In general, a larger tip radius will produce a better surface finish and permit a faster feed rate than a smaller tip radius. American Carbide Tool manufactures standard single-point brazed carbide-tipped tools, and precision ground cutting tools and inserts. The company, founded in 1953, is headquartered in Canton, OH.	B09JYNHX99 Price: $20.88 Score: 5.291 Category: Tools Rating: 2.6 Votes: 4 Find similar products findmall Adjustable Hand Reamer HSS 15/16-1 Inch HSS Hand Reamer Straight Flute. The reamer is a tool used for finishing and semi-finishing of holes, mainly to improve the machining accuracy of the hole and reduce the roughness of its surfaceHand reamer can be hand operated by use of wrenches and used for light cut, repair work, removing stock or simply for enlarging holes, fit for A3 steel, alloy steel, cast iron, cast steel, aluminum and other metal materials, etc Specification: Material: HSSFlutes Quantity: 6Adjustment Range: 23 - 26mm/ 15/16 - 1inOverall Length: 203.09mm/ 8.00inTool Flute Length: 72.90mm/ 2.87inSquare End Size: 13.70 x 13.70mm/ 0.54 x 0.54 inchesAccuracy: 0.02mm/ 0.0008in Features: Adjustable: The blade diameter of the adjustable reamer can be slightly adjusted several times to expand the reused reamer, thereby greatly reducing the loss of the reamer and reducing the processing costStraight Flute: Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts. Straight flute reamers should be used in thru-hole applications onlySquare end: Square end allows the user to turn the reamer by hand with an adjustable wrench or straight handle tap wrench Package Includes: 1 x Adjustable Hand Reamer.
B07V3TDCNZ Price: $51.69 Score: 5.236 Category: Tools Rating: 5 Votes: 2 Find similar products Robert Sorby 833 3/8 Inch Bedan Parting Tool HSS, Unhandled NOT Sovereign Compatible. Years ago, most turning tools came without handles, leaving turners to fashion their own to their specific needs. This made perfect sense as who better suited to make a wood handle than a wood turner. Turners were able to make handles that better fit their hands, were designed for the task at hand and that used whatever wood was readily available. Robert Sorby offers the majority of their tools in unhandled versions to allow turners the flexibility to turn their own custom handles. These High Speed Steel (HSS) tools are the exact same as the ones in their handled tools. These HSS tools are easily sharpened and will keep a sharpened edge about six times longer than carbon steel and resist blued softening from overheating during grinding or from heavy use. This blade is also compatible with the Robert Sorby Sovereign System Modular handles. Solid brass Robert Sorby ferrules are available separately.	B001V9KOV4 Price: $49.68 Score: 5.236 Category: Tools Rating: 3.5 Votes: 4 Find similar products Crown 244 1/8 3mm Parting Tool, 8-1/2 216mm Handle, Walleted. Product Description Crown Tools 244 / Big Horn 24040 1/8 Parting Tool. This quality 1/8-Inch 3-mm Parting Tool features an 8-1/2-Inch 216-mm beechwood handle. From the Manufacturer This quality Crown 1/8-Inch 3-mm Parting Tool features an 8-1/2-Inch 216-mm Rosewood handle.
B00BB2SNFA Price: $38.31 Score: 5.236 Category: Tools Rating: 1 Votes: 1 Find similar products Shrimp IO-1122 Facing Whetstone, Mini, Grooved, Medium. Quickly corrects dents in whetstone Kongo sand makes it more clean and faster.	B077XND3PG Price: $69.94 Score: 5.208 Category: Tools Rating: 5 Votes: 2 Find similar products Crown 230K CRYO Cryogenic 3/4-Inch Spindle Roughing Gouge. This standard #230K 3/4 Roughing Gouge from Crown in the Cryo treated version. Ideal for roughing out the preliminary rounded shape of spindle stock. Stained black ash handle is approximately 10 long, and the tool has an overall length of approximately 16-1/2. England About Crown Cryogenic Tools Years ago tool makers discovered the enormous benefits of cryogenically (super-cold) treated tool cutters, especially plane blades. Now this technology has been applied to select Crown Turning Tools to bring a giant leap in turning tool performance. Cryo treating cutting tools alters the crystalline molecular form of key ingredients in the metal. This altered structure helps the metal achieve a vast improvement in wear resistance for longer life and longer edge retention, and a superior feel in use.