FantasticSearch | E-commerce Search Demo

Scroll to: Top Results

E-commerce Search Demo

AI Assisted Filters

Positive filters:

Negative filters:

Category filter:

Parameters

Query:

Positive filters:

Negative filters:

Category filters: All

AI Assist: ON

Page: 1

Products

Time taken: 3 Max score: 1000.000 Total hits: 600 Full time: 0.0 s
Showing 1-10 of 600 products

B01B8T96T2 Availability: Currently unavailable Score: 1000.000 Category: Tools Rating: 5 Votes: 2 Find similar products DAE P204-200-S KIT L, UL Listed kWh Smart Submeter Polaris 2000, 3 phase, 4 wire, 200A, 120/208v, with 3 Solid Core CTs. 200A Revenue-Grade Polaris 2000 kWh Meter, 120/208V, 3 phases, 4 wires (Wye), with 3 Solid core CTs (inner diameter 1.02, CT-200D3).1/2 and 3/4' Knockouts are available to connect with wiring conduits.Split core CTs (CT-200S) optional. Solid core CTs are suggested for new construction or for retrofitting construction when the power can be shut off. Split core CTs are ideal for retrofitting projects without having to disconnect wire terminations.1000 pulses per kWhCurrent sensors (CTs) inner diameter 1.02 and their accuracy will not be affected when the CTs are mounted up to 2000 feet away from the meter.kWh reading With LED display, very clear even in not-well lighted areaParallel up to three sets of CTs for cumulative reading. Non-volatile Memory, the stored data is maintained through power outages.Demand optional (15 minute interval standard, 30 minute or 60 minute intervals available)No conversion factor or multiplier required.Foolproof system. The whole LED display will be warning if the meter is improperly installed.DAE’s CTs are exactly the same and exchangeable among all the meters including Polaris 1000, 1500, 2000, 2500, 3000 and SMB 350 multi-circuit, multi-function meters.Five year warranty from the seller.See DAE Controls website for more information.	B088RMD721 Price: $275 Score: 8.333 Category: Tools Rating: 5 Votes: 1 Find similar products GridGear kWH Electric Meter, 120/208/240V, 3W, with 2 200A or Less Solid Core CT's, Surface Mount Kit, with Outdoor Enclosure. GridGear’s GG is a flexible, low cost, revenue grade meter, for the residential, commercial, and institutional market. The meter is UL listed (E489079) and designed to provide accurate measurement and verification of electricity consumption. Ease of installation and configuration makes the GG an ideal choice for many submetering applications including, new construction, retrofit upgrades and up to 3 element load monitoring. The meter comes equipped with a display, isolated pulse output and adaptable register output for interfacing to 3rd party pulse counters, recorders, and AMR systems. GridGear supplies a line of UL approved solid and split core,revenue grade, current transformers that are calibrated with our line of meters to maximize system accuracy. APPLICATIONS AND FEATURES GridGear GG meters are designed with the following features and intended applications: Measurement and Verification Tenant cost allocation and billing Energy conservation and cost reduction Automatic Meter Reading Individually tested for 99.5% accuracy Self powered from voltage inputs Multi service configurations: 120V Line to Neutral Single Phase 2 Wire 120V Line to Neutral/240V Line to Line Single Phase 3 Wire 120V Line to Neutral/208V Line to Line 3 Phase 4 Wire Wye Employs revenue grade accuracy, 100mA secondary solid and split core current transformers (CT’s) Has an isolated pulse output for integration into 3rd party counters, recorders, and AMR systems. Factory adjustable pulse weights from 4mWh/pulse to 1kWh/pulse. UL listed (E489079) as an open style meter for use with different enclosures.This meter is NTEP approved for California use.
B09CBFF6Q8 Availability: Currently unavailable Score: 6.897 Category: Tools Rating: 5 Votes: 2 Find similar products DAE P153-200-S KIT, UL CTEP kWh Smart Submeter, 1 phase 3 wire (2 hot wire, 1 neutral), 200A, 120/240v, 2 CTs, RS485. .	B0BR4JNSXP Price: $144.99 Score: 6.098 Category: Tools Rating: 4 Votes: 2 Find similar products Industrial PDU 240V 30A L6-30P Plug AMP & WATT Meter Breaker 6-C13 & 4-C19 (Black). Main Features: Voltage/Current Meter, Power Surge Protection and Breaker.
B08BJTPTMQ Price: $31.32 Score: 5.814 Category: Tools Rating: 3.4 Votes: 3 Find similar products 3 Phase 4P KWh Meter Energy Meter 220/380V 5-80A Digital Electric Power Meter Electricity Usage Monitor for Power Metering Systems. Feature: This product adopts transparent shell, which is convenient to observe the operation status of electronic components inside the meter. LCD backlight display is used to read data clearly. The power consumption of the product is very low. The theoretical power consumption is less than or equal to 2 W. The product has stable performance and can run steadily in the range of -20-55 degrees Celsius. Products are widely used in power metering systems. Specification: Model: DTM024 Voltage: 3x220/380V Current: 3x5 (80) A Accuracy level: 1.0 Standard: IEC62052-11 IEC62053-21 Frequency: 50 Hz Pulse constant: 400imp/kWh Display: LCD 6+2 Power consumption: ≤ 2W, 10VA Starting current: 0.004lb Working temperature -20~55°C Storage temperature: -25~70°C Working voltage: 0.9-1.1 rated voltage Maximum voltage: 0.8-1.15 rated voltage Annual average humidity value: ≤75% Creep: less than 1 pulse when the rated voltage is 115% or no current Weight: 398g / 14.0oz Package list: 1 * Electric Power Meter(without battery) Note: The actual product color may deviate from the photo due to light. There may be a slight deviation in the measurement of product.	B00VHBJZJS Availability: Currently unavailable Score: 5.650 Category: Tools Rating: 5 Votes: 4 Find similar products DROK® Digital AC Amp Volt Multimeter Ammeter Voltmeter AC 200-450V 1-199.9A Voltage Ampere Tester Meter Car Motorcycle Motor 2in1 LCD Voltage Current Measure with Current Transformer CT. Parameters: Measuring range: AC200-450V; AC1-199.9A (with sensor transformer) Accuracy: 1% +/- 2 digits Power consumption: <0.2 VA Measurement speed: about 2 times/seconds Working mode: voltage and current dual display; 2-wires Color of housing: black Display: three-digits LCD display blue backlight Dimensions: 70x40x40mm Installation size: 68x38 mm (flush mounting) Sensor pore size: 24mm Features: 1.Dual display of AC voltage and AC current in the same time 2.The meter requires no extra power supply and AC transformer(package includes AC transformer) 3.LCD display with words in black and blue background, clear to read 4.It can directly replace the 85L17 Analog current and voltage meter 5.This meter can be widely used with power distribution box, distribution cabinet, voltage regulators Note: 1.The meter only suits for pure AC 50-60Hz power supply and cannot used for wave square, output of inverter and circuit testing in sine wave of revised wave square, or the meter will be damaged forever 2.This meter can directly replace the 85L17 analog current and voltage meter Usage: The meter can be applied to power distribution box, distribution cabinet, regulators, teaching aids, household small distribution box etc. Wiring sequence: 1.Connect current loop 2.Connect the AC power supply 3. Please do not touch any components and circuit to avoid electric shock Package included: 1x Digital AC Volt Amp Meter 1x Sensor Transformer.
B08QCTK772 Price: $13.49 Score: 5.525 Category: Tools Rating: 3.4 Votes: 3 Find similar products Oumefar Generator Dual Display LED Detector Digital AC Monitor Gauge Panel Ammeter Voltmeter Frequency Meter Testing Tool Current Sense Transformer(Black). Features: AC 80-500V LED dual display of AC voltage and frequency in the same time. The data is more intuitive, LED two-color display, red + green, clear and easy for monitoring at a glance. Do not need power supply, two wires just connect with AC 80-500V directly, then you can finish testing. Easy to install, embedded buckle installation, more stable. Meter only fits with pure AC 45-60HZ power supply, not be used for square wave, inverter output. Specification: Condition:100% Brand New Product Model: YB4835VF Material: Plastic Color: White, Black(Optional) Weight: Approx.70g/2.5oz Display Mode: 0.39in LED, voltage: red word, frequency: green word Measurement Accuracy: 1%(±2 words ) Testing Rate: 2 times/sec Frequency Measuring Range: 45.0 - 60.0Hz Minimum Resolution: 0.1hz Voltage Measuring Range: AC80-500V Minimum Resolution: 1V Package List: 1 x Voltage Frequency Meter.	B085DDLT4Y Availability: Currently unavailable Score: 5.525 Category: Tools Rating: 4 Votes: 22 Find similar products DC Multifunction Meter, DROK Voltmeter Ammeter Multimeter 0-120V 30A LCD Display Bidirectional Voltage Current Power Capacity Energy Temperature Time Tester for Battery Charging Discharging Monitoring. DROK 7-in-1 DC Multimeter Panel Measuring Range: Voltage: DC 6V-75V (self-powered)/ DC 0-12V (external power source) External Power Source Voltage Range: DC 6-60V Current: 0-30A Capacity: 0.001AH-65000.00AH Energy: 0.00KWH-99999.9WH Running Time: 0-100h Power: 99KW Temperature: 1-100℃ Accuracy: Voltage: ±1% + 2 digits Current: ±2% + 5 digits Temperature: ±1℃ Measuring Rate: 5 times/second Protection: OVP (Over-voltage protection): 0.01V-120V LVP (Low-voltage protection): 0.01-120V OCP (Over-current protection): 0-30A NCP (Discharging over-current protection): 0-30A OTP (Over-temperature protection): 0-100℃ Display Panel Dimension: 784226mm/3.071.651.02 inch Measurement Panel Dimension: 874924mm/3.431.930.94 inch Note: If the voltage of the power supply (battery) to be detected is within DC 6V~75V in normal operation, the meter can be powered by the battery. If the voltage of the power supply (battery) to be detected is beyond DC 6V~75V in normal operation, it needs a external power source to supply power to the meter. External power source voltage range is DC 6V-60V. Package Included: 1x DC Multifunction Meter.
B004O8X8IU Availability: Currently unavailable Score: 5.495 Category: Tools Rating: 2.9 Votes: 2 Find similar products BK Precision 2708B Auto-Ranging, True RMS Digital Multimeter, 10 Amp, 750VAC, 1000 VDC, 34 Megaohms. The BK Precision 2708B digital multimeter (also known as a multitester) is a true RMS, auto-ranging meter for measuring current, voltage, and resistance in electrical testing applications. The meter comes with a set of detachable test leads. An audible continuity sensor confirms a circuit conducts electricity, and a diode test detects proper functioning of a circuit’s diodes. The LCD shows readings in digits and on a 34-segment bar graph. The hold function keeps a reading on the display, even after the meter is disconnected. An alarm sounds when the test leads are connected to the wrong jack for the measurement being taken. The unit automatically turns off after 10 minutes of nonuse to conserve battery life, and a low-battery indicator signals when the meter's batteries need to be replaced. A magnetic strap is included for hanging the meter from a metal door or surface for hands-free use. This true RMS (root mean square) meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has an undistorted waveform, or nonlinear loads, such as electronic devices or motors, where the current or voltage has a distorted waveform. When turned on, the meter is in auto-ranging mode and automatically selects the correct operating range for the property being measured. It can be switched to manual-ranging mode, which allows the operator to choose the appropriate operating range. The LCD has a 3,400-count resolution, meaning it can display up to 3,399 units (3-3/4 digits) before the operating range needs to be changed. It meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for Category II installations up to 1,000V, which covers large household appliances and devices connected to a fixed power supply (such as refrigerators and air conditioners), and Category III installations up to 600V, which covers items used with enclosed building circuit installations (such as service panel parts, branch circuits, and fixed installations that are connected directly to a building's AC power supply). Specifications Maximum alternating current (AC) input10 ampMaximum direct current (DC) input10 ampMaximum AC voltage input750 volts (V)Maximum DC voltage input1,000VMaximum resistance detected34 megaohmsPower supply9V battery (one, installed)Standards metEuropean Conformity (CE); International Electrotechnical Commission (IEC) safety standard 61010-1; European Union EMC (EN) EN61326Weight285 g/10 oz.Dimensions165 x 78 x 42.5 mm/6.5 x 3.1 x 1.7 inches (H x W x D) H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Multitesters (also called multimeters) are electrical test meters that measure multiple properties of an electrical circuit, such as current, voltage, resistance, capacitance, and continuity. Available in handheld or benchtop models, multitesters diagnose electrical problems in electrical equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Multitesters display information either in analog or digital form. Factors that influence meter choice include the electrical properties to be measured, the anticipated range of results, and the desired level of protection against transient voltages. Safety ratings are based on the International Electrotechnical Commission's (IEC) standards for low-voltage test equipment. IEC 61010 delineates four overvoltage installation categories. In general, a meter with a category IV rating will provide more protection against transient voltages than a meter with a lower category rating. BK Precision manufactures test and measurement instruments for research and development, production-line testing, and electronic field service applications. The company, founded in 1951, is headquartered in Yorba Linda, CA. It meets International Organization for Standardization (ISO) standard 9001:2008 and is compliant with Restriction of Hazardous Substances (RoHS) and waste electronic and electrical equipment (WEEE) directives. What's in the Box? BK Precision 2708B true RMS digital multimeter BK Precision 2708B true RMS digital multimeter (1) Set test leads (1) Set test leads 9V battery (installed) 9V battery (installed) Spare fuse Spare fuse Instructions Instructions.	B008S0P8QK Availability: Currently unavailable Score: 5.495 Category: Tools Rating: 4 Votes: 1 Find similar products Reed ST-ELECTRICKIT2 Electrical Test Kit with Auto-Ranging, True RMS Multimeter, Clamp-On Current Attachment, Temperature Input Adapter, K-Type Thermocouple Probe, AC Line Splitter, Test Leads, and Case. The Reed Instruments ST-Electrikit2 electrical test kit includes a digital multimeter, clamp-on current attachment, temperature input adapter, K-type thermocouple probe, and AC line splitter for installing, repairing, and maintaining commercial and residential electrical systems. The kit comes with instructions and batteries for all components and one test lead set for the multimeter. A carrying case is included for storing and transporting the kit when not in use. The Reed Instruments ST-9919 digital multimeter (also known as a multitester) measures voltage, current, resistance, capacitance, frequency, duty cycles, and temperature in electrical testing applications. The meter measures duty cycles to 99.90%, indicating the percent of time a circuit is on. An audible continuity sensor confirms a circuit conducts electricity, and a diode test detects proper functioning of a circuit’s diodes. The LCD shows readings in digits and on a bar graph and is backlit for readability in low light. The meter's internal memory stores maximum and minimum values for a session for future recall. The peak hold function records instantaneous peak values, such as when a motor is turned on. The relative mode stores a reading in memory to use as a zero point for subsequent readings so that multiple readings can be compared. The hold function keeps a reading on the LCD, even after the meter is disconnected. It is a true RMS (root mean square) meter and provides accurate readings when measuring linear loads where the current or voltage has an undistorted waveform, or nonlinear loads where the current or voltage has a distorted waveform. When turned on, the meter is in auto-ranging mode and automatically selects the correct operating range for the property being measured. It can be switched to manual-ranging mode, which allows the operator to choose the appropriate operating range. The LCD has a 40,000-count resolution, meaning it can display up to 39,999 units (4-3/4 digits) before the operating range needs to be changed. The meter operates on one 9V battery (installed). The Reed Instruments CP-09 clamp-on current attachment connects to a compatible multimeter to extend the meter's current-measurement capabilities. It has two jaws that can close around an electrical conductor to measure current without touching or interrupting the circuit. A finger guard on the body of the meter helps protect fingers from shock. The Reed Instruments AD-1 temperature adapter allows a temperature probe with a mini connector to be connected to a compatible multimeter with 3/4 banana jacks. The Reed Instruments TP-01 K-type thermocouple wire probe measures surface temperature. The Reed Instruments AC-006 AC line splitter connects to a compatible multimeter to take AC current measurements on a 2- or 3-wire power cord up to 15 amp without requiring the plug to be removed or the wire to be split. It also indicates if there is live voltage present in the wire. Specifications Multimeter maximum alternating current (AC) or direct current (DC) voltage input1,000 volts (V)Multimeter maximum resistance detected40 megaohmsMultimeter maximum AC or DC current input10 ampMultimeter maximum frequency detected400 megahertz (MHz)Multimeter maximum capacitance detected40 millifarads (mF)Multimeter temperature measurement range-50 to 1,000 degrees Celsius/-58 to 1832 degrees FahrenheitMultimeter standards metEuropean Conformity (CE); International Electrotechnical Commission (IEC) safety standard 61010-1 and 61326; Underwriters Laboratories (UL) 61010-1, 2nd Ed. (2004), UL61010B-2-031; Canadian Standards Association (CAN/CSA) C22.2 No. 61010-1 2nd Ed. (2004)Multimeter safety category ratingCategory III 1,000V, Category IV 600VClamp meter maximum AC current input200 ampClamp meter maximum voltage output1 millivolt (mV) per ampLine splitter maximum AC current input15 ampLine splitter safety category ratingCategory II 600V Multitesters (also called multimeters) are electrical test meters that measure multiple properties of an electrical circuit, such as current, voltage, resistance, capacitance, and continuity. Available in handheld or benchtop models, multitesters diagnose electrical problems in electrical equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Multitesters display information either in analog or digital form. Factors that influence meter choice include the electrical properties to be measured, the anticipated range of results, and the desired level of protection against transient voltages. Safety ratings are based on the International Electrotechnical Commission's (IEC) standards for low-voltage test equipment. IEC 61010 delineates four overvoltage installation categories. In general, a meter with a category IV rating will provide more protection against transient voltages than a meter with a lower category rating. Reed Instruments manufactures test and measurement equipment such as pressure gauges, electrical testers, temperature and humidity instrumentation, and inspection instruments. The company, founded in 2004, is headquartered in Wilmington, NC. What's in the Box? Reed Instruments ST-9919 true RMS digital multimeter Reed Instruments ST-9919 true RMS digital multimeter Test lead set for ST-9919 Test lead set for ST-9919 Reed Instruments CP-09 current clamp adapter Reed Instruments CP-09 current clamp adapter Reed instruments AD-1 temperature adapter Reed instruments AD-1 temperature adapter Reed Instruments TP-01 K-type thermocouple wire probe Reed Instruments TP-01 K-type thermocouple wire probe Reed Instruments AC-006 AC line splitter Reed Instruments AC-006 AC line splitter Batteries Batteries Carrying case Carrying case Instructions Instructions.