FantasticSearch | E-commerce Search Demo

Scroll to: Top Results

E-commerce Search Demo

AI Assisted Filters

Positive filters:

Negative filters:

Category filter:

Parameters

Query:

Positive filters:

Negative filters:

Category filters: All

AI Assist: ON

Page: 1

Products

Time taken: 3 Max score: 1000.000 Total hits: 600 Full time: 0.0 s
Showing 1-10 of 600 products

B01JTPMBSU Price: $8.95 Score: 1000.000 Category: Tools Rating: 5 Votes: 5 Find similar products Metal Lathe Tooling High Speed Steel (M2) Lathe Cut-Off Blade, Size P1N - 0.040 x 1/2 x 3.5 - M2 HSS, LittleMachineShop.com (1930). Our Lathe Cut-Off Blade is made with M2 high speed steel, ensuring a long-lasting and reliable performance. It measures 0.040 x 1/2 x 4-1/2 and is perfect for all your lathe cutting needs. Its size P1X makes it ideal for precise cuts. These blades are considered T-Shaped and provide great side clearance while the M2 high speed steel provides excellent wear resistance. Whether you're a professional machinist or a DIY enthusiast, you can trust in the quality of our Lathe Cut-Off Blade for all your machining tasks.M2 high speed steel is a popular choice for cutting tools due to its ability to maintain a sharp edge at high temperatures and its resistance to wear and deformation. It is made by adding molybdenum and tungsten to a basic high carbon steel alloy, resulting in a tool material that is tough and durable. Our Lathe Cut-Off Blade is made with this top-quality material, ensuring that it can handle even the most demanding machining tasks.P-type cut-off (or parting) blades are considered T-shaped. Because the body of the tool is narrower than the cutting tip, friction is reduced making the difficult task of parting off somewhat easier.Size P1 blades are 1/16 wide and are the most commonly-used size. P1N blades are 0.040 wide. These thinner blades are good for small work. P1X blades are 5/64 wide. Use these thicker blades for parting off larger diameters where you need additional stiffness.It is easier to part off large diameters if you cut a groove that is wider than the cut-off blade. First, make a cut about 0.100 deep. Now back out and move over at least 0.010. Cut in again, widening the slot. Continue with this cut until you are 0.100 deeper than the first slot. Repeat this process, moving back and forth, until you are through.	B0986M7MMS Price: $13.99 Score: 8.547 Category: Tools Rating: 4.4 Votes: 15 Find similar products Set of 2 HSS 0.04 x 1/2 x 3-1/2 for Lathe Parting Cut Off Blade Parallel Type P1N. General purpose ground blade show exceptional results on mild steel, alloys and tool steels.
B0093C22BG Availability: Currently unavailable Score: 7.813 Category: Tools Rating: 5 Votes: 1 Find similar products Magnate M62M12V10 Bi-Metal Bandsaw Blade, 62 Long - 1/2 Width, 10-14 Variable Tooth. All Magnate bandsaw blades are welded and fabricated in the USA. The coils/material are USA brands but may not be made in the USA. All band saw blades’ pictures depict a general bandsaw blade and thus may look different from each particular item. Bi-Metal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods ( especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16 to 1/4 thick material, * 14 - 18 variable to cut 1/8 to 3/8 thick material, * 10 - 14 variable to cut 3/16 to 7/16 thick material, * 8 - 12 variable to cut 1/4 to 1/2 thick material, * 6 - 10 variable or 6 Hook to cut 5/16 to 5/8 thick material, * 5 - 8 variable or 6 Hook to cut 3/8 to 1 thick material, * 4 - 6 variable or 6 Hook to cut 1/2 to 2 thick material, * 3 - 4 variable or 4 Hook to cut 3/4 to 4-1/2 thick material, * 3 Hook to cut 1 to 6 thick material, * 2 Hook to cut 2 to 12 thick material. Warning: For packaging purposes, this blade is folded into a coiled position which is similar to a spring and may pop open when being coiled or uncoiled. Wear heavy duty leather gloves and eye/body protection while using extreme care when coiling or uncoiling a blade. Failure to exercise the proper care could result in serious bodily injury. See your bandsaw owner's manual for further safety instructions. Please refer to your owner's/operation manual to make sure the blade's length, width and thickness can fit your bandsaw machine.	B0015H3DA6 Price: $31.86 Score: 7.576 Category: Tools Rating: 5 Votes: 4 Find similar products Magnate M70.5M38V14 Bi-metal Bandsaw Blade, 70-1/2 Long - 3/8 Width, 14-18 Variable Tooth. All Magnate bandsaw blades are welded and fabricated in the USA. The coils/material are USA brands but may not be made in the USA. All band saw blades’ pictures depict a general bandsaw blade and thus may look different from each particular item. Bi-Metal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods ( especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16 to 1/4 thick material, * 14 - 18 variable to cut 1/8 to 3/8 thick material, * 10 - 14 variable to cut 3/16 to 7/16 thick material, * 8 - 12 variable to cut 1/4 to 1/2 thick material, * 6 - 10 variable or 6 Hook to cut 5/16 to 5/8 thick material, * 5 - 8 variable or 6 Hook to cut 3/8 to 1 thick material, * 4 - 6 variable or 6 Hook to cut 1/2 to 2 thick material, * 3 - 4 variable or 4 Hook to cut 3/4 to 4-1/2 thick material, * 3 Hook to cut 1 to 6 thick material, * 2 Hook to cut 2 to 12 thick material. Warning: For packaging purposes, this blade is folded into a coiled position which is similar to a spring and may pop open when being coiled or uncoiled. Wear heavy duty leather gloves and eye/body protection while using extreme care when coiling or uncoiling a blade. Failure to exercise the proper care could result in serious bodily injury. See your bandsaw owner's manual for further safety instructions. Please refer to your owner's/operation manual to make sure the blade's length, width and thickness can fit your bandsaw machine.
B0010QQKBQ Price: $9.79 Score: 7.519 Category: Tools Rating: 3.4 Votes: 22 Find similar products Magnate M70.5C14R24 Carbon Steel Bandsaw Blade, 70-1/2 Long - 1/4 Width, 24 Raker Tooth. Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal ( i.e. aluminum, copper and brass ) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel ( don't cut hard steel ), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 24 raker to cut 1/16 to 1/4 thick material, * 18 raker to cut 1/8 to 3/8 thick material,* 14 raker to cut 3/16 to 7/16 thick material,* 10 raker to cut 1/4 to 5/8 thick material,* 6 Hook to cut 3/8 to 2 thick material,* 4 Hook to cut 3/4 to 4-1/2 thick material,* 3 Hook to cut 1 to 6 thick material,* 2 Hook to cut 2 to 12 thick material. All Magnate bandsaw blades are welded and fabricated in the USA. The coils/material are USA brands but may not be made in the USA. All band saw blades’ pictures depict a general bandsaw blade and thus may look different from each particular item. Warning: For packaging purposes, this blade is folded into a coiled position which is similar to a spring and may pop open when being coiled or uncoiled. Wear heavy duty leather gloves and eye/body protection while using extreme care when coiling or uncoiling a blade. Failure to exercise the proper care could result in serious bodily injury. See your bandsaw owner's manual for further safety instructions. Please refer to your owner's/operation manual to make sure the blade's length, width and thickness can fit your bandsaw machine.	B004CP2A9S Price: $11.55 Score: 7.519 Category: Tools Rating: 3.9 Votes: 7 Find similar products Magnate M67.5C316S6 Carbon Steel Bandsaw Blade, 67-1/2 Long - 3/16 Width, 6 Skip Tooth. Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal ( i.e. aluminum, copper and brass ) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel ( don't cut hard steel ), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 24 raker to cut 1/16 to 1/4 thick material, * 18 raker to cut 1/8 to 3/8 thick material,* 14 raker to cut 3/16 to 7/16 thick material,* 10 raker to cut 1/4 to 5/8 thick material,* 6 Hook to cut 3/8 to 2 thick material,* 4 Hook to cut 3/4 to 4-1/2 thick material,* 3 Hook to cut 1 to 6 thick material,* 2 Hook to cut 2 to 12 thick material. All Magnate bandsaw blades are welded and fabricated in the USA. The coils/material are USA brands but may not be made in the USA. All band saw blades’ pictures depict a general bandsaw blade and thus may look different from each particular item. Warning: For packaging purposes, this blade is folded into a coiled position which is similar to a spring and may pop open when being coiled or uncoiled. Wear heavy duty leather gloves and eye/body protection while using extreme care when coiling or uncoiling a blade. Failure to exercise the proper care could result in serious bodily injury. See your bandsaw owner's manual for further safety instructions. Please refer to your owner's/operation manual to make sure the blade's length, width and thickness can fit your bandsaw machine.
B002YC9G7K Price: $31.86 Score: 7.463 Category: Tools Rating: 5 Votes: 2 Find similar products Magnate M68.5M12V6 Bi-metal Bandsaw Blade, 68-1/2 Long - 1/2 Width, 6-10 Variable Tooth. All Magnate bandsaw blades are welded and fabricated in the USA. The coils/material are USA brands but may not be made in the USA. All band saw blades’ pictures depict a general bandsaw blade and thus may look different from each particular item. Bi-Metal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods ( especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16 to 1/4 thick material, * 14 - 18 variable to cut 1/8 to 3/8 thick material, * 10 - 14 variable to cut 3/16 to 7/16 thick material, * 8 - 12 variable to cut 1/4 to 1/2 thick material, * 6 - 10 variable or 6 Hook to cut 5/16 to 5/8 thick material, * 5 - 8 variable or 6 Hook to cut 3/8 to 1 thick material, * 4 - 6 variable or 6 Hook to cut 1/2 to 2 thick material, * 3 - 4 variable or 4 Hook to cut 3/4 to 4-1/2 thick material, * 3 Hook to cut 1 to 6 thick material, * 2 Hook to cut 2 to 12 thick material. Warning: For packaging purposes, this blade is folded into a coiled position which is similar to a spring and may pop open when being coiled or uncoiled. Wear heavy duty leather gloves and eye/body protection while using extreme care when coiling or uncoiling a blade. Failure to exercise the proper care could result in serious bodily injury. See your bandsaw owner's manual for further safety instructions. Please refer to your owner's/operation manual to make sure the blade's length, width and thickness can fit your bandsaw machine.	B072XDHVBX Price: $14.57 Score: 7.463 Category: Tools Rating: 4.5 Votes: 3 Find similar products Magnate M100.75C12H4 Carbon Steel Bandsaw Blade, 100-3/4 Long - 1/2 Width, 4 Hook Tooth. Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal ( i.e. aluminum, copper and brass ) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel ( don't cut hard steel ), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 24 raker to cut 1/16 to 1/4 thick material, * 18 raker to cut 1/8 to 3/8 thick material,* 14 raker to cut 3/16 to 7/16 thick material,* 10 raker to cut 1/4 to 5/8 thick material,* 6 Hook to cut 3/8 to 2 thick material,* 4 Hook to cut 3/4 to 4-1/2 thick material,* 3 Hook to cut 1 to 6 thick material,* 2 Hook to cut 2 to 12 thick material. All Magnate bandsaw blades are welded and fabricated in the USA. The coils/material are USA brands but may not be made in the USA. All band saw blades’ pictures depict a general bandsaw blade and thus may look different from each particular item. Warning: For packaging purposes, this blade is folded into a coiled position which is similar to a spring and may pop open when being coiled or uncoiled. Wear heavy duty leather gloves and eye/body protection while using extreme care when coiling or uncoiling a blade. Failure to exercise the proper care could result in serious bodily injury. See your bandsaw owner's manual for further safety instructions. Please refer to your owner's/operation manual to make sure the blade's length, width and thickness can fit your bandsaw machine.
B002YC9G2U Price: $9.79 Score: 7.407 Category: Tools Rating: 5 Votes: 1 Find similar products Magnate M67.5C14R24 Carbon Steel Bandsaw Blade, 67-1/2 Long - 1/4 Width, 24 Raker Tooth. Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal ( i.e. aluminum, copper and brass ) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel ( don't cut hard steel ), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 24 raker to cut 1/16 to 1/4 thick material, * 18 raker to cut 1/8 to 3/8 thick material,* 14 raker to cut 3/16 to 7/16 thick material,* 10 raker to cut 1/4 to 5/8 thick material,* 6 Hook to cut 3/8 to 2 thick material,* 4 Hook to cut 3/4 to 4-1/2 thick material,* 3 Hook to cut 1 to 6 thick material,* 2 Hook to cut 2 to 12 thick material. All Magnate bandsaw blades are welded and fabricated in the USA. The coils/material are USA brands but may not be made in the USA. All band saw blades’ pictures depict a general bandsaw blade and thus may look different from each particular item. Warning: For packaging purposes, this blade is folded into a coiled position which is similar to a spring and may pop open when being coiled or uncoiled. Wear heavy duty leather gloves and eye/body protection while using extreme care when coiling or uncoiling a blade. Failure to exercise the proper care could result in serious bodily injury. See your bandsaw owner's manual for further safety instructions. Please refer to your owner's/operation manual to make sure the blade's length, width and thickness can fit your bandsaw machine.	B004COXV4C Price: $8.88 Score: 7.407 Category: Tools Rating: 4.3 Votes: 3 Find similar products Magnate M59.5C14R24 Carbon Steel Bandsaw Blade, 59-1/2 Long - 1/4 Width, 24 Raker Tooth. Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal ( i.e. aluminum, copper and brass ) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel ( don't cut hard steel ), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 24 raker to cut 1/16 to 1/4 thick material, * 18 raker to cut 1/8 to 3/8 thick material,* 14 raker to cut 3/16 to 7/16 thick material,* 10 raker to cut 1/4 to 5/8 thick material,* 6 Hook to cut 3/8 to 2 thick material,* 4 Hook to cut 3/4 to 4-1/2 thick material,* 3 Hook to cut 1 to 6 thick material,* 2 Hook to cut 2 to 12 thick material. All Magnate bandsaw blades are welded and fabricated in the USA. The coils/material are USA brands but may not be made in the USA. All band saw blades’ pictures depict a general bandsaw blade and thus may look different from each particular item. Warning: For packaging purposes, this blade is folded into a coiled position which is similar to a spring and may pop open when being coiled or uncoiled. Wear heavy duty leather gloves and eye/body protection while using extreme care when coiling or uncoiling a blade. Failure to exercise the proper care could result in serious bodily injury. See your bandsaw owner's manual for further safety instructions. Please refer to your owner's/operation manual to make sure the blade's length, width and thickness can fit your bandsaw machine.