FantasticSearch | E-commerce Search Demo

Scroll to: Top Results

E-commerce Search Demo

AI Assisted Filters

Positive filters:

Negative filters:

Category filter:

Parameters

Query:

Positive filters:

Negative filters:

Category filters: All

AI Assist: ON

Page: 1

Products

Time taken: 4 Max score: 1000.000 Total hits: 600 Full time: 0.0 s
Showing 1-10 of 600 products

B01MT5FJ28 Price: $134.95 Score: 1000.000 Category: Tools Rating: 3.9 Votes: 3 Find similar products 3 Screwless Vise plus Parallels and Mounting Clamps - The Body and Jaws are Hardened to Rc 58-62 - All Sides are Flat, Square and Parallel to 0.0002, LittleMachineShop.com (3763). This high precision toolmakers screwless vise has a one-piece body. The body and jaws are hardened to Rc 58-62. All sides are flat, square and parallel to 0.0002. There are horizontal and vertical vees on the inside face of the movable jaw to hold round objects. The jaws are 1.38 deep and open to 3.78 capacity. The vise is 7.28 long, 2.76 tall and 3.00 wide.Set of ten pairs of thin parallels in a fitted case The thin parallels are 1/8 thick and 3 long. The heights are 1/2, 5/8, 3/4, 7/8, 1, 1-1/8, 1-1/4, 1-3/8, 1-1/2, and 1-5/8. They are made of high grade alloy steel hardened to 52 to 58 Rc . The top and bottom of each parallel is parallel within 0.0002. The pairs are matched in height within 0.0004.The pair of clamps is used to mount a screwless vise on your mill table. You furnish T-slot nuts and socket head cap screws (up to 3/8 diameter) of the appropriate length for your mill. These clamps are height-adjustable so they will work with any screwless vise with 8 mm (5/16) or larger holes. You can also use these clamps in the slots that are in the end of most screwless vises.	B01N6N7HR9 Price: $99.95 Score: 11.364 Category: Tools Rating: 4.7 Votes: 3 Find similar products 3 Screwless Vise with Hold Down Clamps - Height Adjustable Clamps, LittleMachineShop.com (3767). This high precision toolmakers screwless vise has a one-piece body. The body and jaws are hardened to Rc 58-62. All sides are flat, square and parallel to 0.0002. There are horizontal and vertical vees on the inside face of the movable jaw to hold round objects.The jaws are 1.38 deep and open to 3.78 capacity.The vise is 7.28 long, 2.76 tall and 3.00 wide.The pair of clamps is used to mount the screwless vise on your mill table. You furnish 3/8 socket head cap screws of the appropriate length for your mill, and T-slot nuts. These clamps are height-adjustable so they will work with any screwless vise with 8 mm (5/16) or larger holes. You can also use these clamps in the slots that are in the end of most screwless vises.
B098BGB9KS Price: $39.99 Score: 7.813 Category: Tools Rating: 4.2 Votes: 14 Find similar products EXXO 6 Inch Bench Vise - Clamp On Vise Heavy Duty Universal Cast Iron 2 Inch Vise Jaw Depth Adjustable Table Vise Woodworking Tools and Equipment Carpenter Tools Workbench Vise Metal Working Tools. Exxo Shop Bench Vise About Us Exxo Tools is a quality hand tools manufacturer that offers engineering excellence for the world's most demanding industries. Our tool range includes Industrial Tools, Precision Tools, Cutting Tools, Lubrication Tools and more! As a leader in the Tools Manufacturing Industry, we make it a point to focus on quality and customer satisfaction. This distinction sets us apart from our competitors. Woodworkers Bench Vise Our heavy duty work bench vise has been designed with the best features available. Users love the hole provision for attaching wood liners, adjustable vise clamp and built-in slots integrated for permanent clamping and the vise jaws that are equipped with a toe-in feature to help provide even clamping. Versatile Fit This wood vise is adjustable for many surfaces including a garage work bench, shop table, portable work benches, wooden tables, desk and more. It can be used to create the ultimate workstation. Made for quick, secure attachment by simply tightening the bolts on the C clamp. Top Quality This general purpose vise system is made with casting iron metal for increased strength and durability. For easy cleaning, repair and maintenance refer to owner's manual. Good for work benches for garage, jewelry vise, gun vise for cleaning, pipe vise, hobby vise, milling vise and more. Useful Vises can be used by a beginner or professional. They are a very useful tool for woodworkers, mechanics, metal workers, crafters, jewelers, locksmith, machinist and others. They are ideal for many projects including crafts, utility work, repair work, welding, gunsmith work, epoxy work, jewelry making and more. Use them to hold or grip accessories and gadgets together, as a grinder, press and more. Great for light, medium or heavy use. Specs Jaw Width: 6 Inches Jaw Width: 6 Inches Jaw Opening: 4-1/2 Inches Jaw Opening: 4-1/2 Inches Jaw Depth: 2 Inches Jaw Depth: 2 Inches.	B006K3GQGS Availability: Currently unavailable Score: 7.576 Category: Tools Rating: 4.2 Votes: 61 Find similar products Yost Vises 936-AS 6 All-Steel Combination Pipe and Bench Vise with 360-Degree Swivel Base. The Yost Vises 936-AS 6 medium-duty all-steel combination pipe and bench vise has a 360-degree swivel base and mounts to a workbench to provide clamping action. The 360-degree swivel base adjusts the direction of the jaws for proper placement. Hand-tightening the two lock knobs on the base secures its position. The body is made of cast steel and has a black painted finish for mild corrosion protection. A flat portion on the body acts as a reinforced anvil and an additional work surface. The top jaws are made of hardened steel and can be replaced when worn, and the built-in pipe jaws are cast steel. Both the top jaws and pipe jaws are grooved for enhanced grip. The jaws draw closer together or farther apart by turning the vise handle clockwise or counterclockwise. The main screw that controls the jaws has been continuous rolled for high strength and is covered by a bar to protect it from damage. A rubber washer on either side of the handle prevents unwanted sliding when turning, and the balls on each end unscrew to enable replacement of the handle if worn. The base has three 0.56-diameter holes for mounting hardware (not included). Specifications Jaw width (nominal)6Jaw opening (nominal)5Throat depth (nominal)2-5/8Pipe capacity1/2 to 1-1/2Overall dimensions6 x 7 x 16 inches (H x W x D)Weight29 lb. H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Vises use the clamping action of jaws to hold a workpiece in place for applications such as drilling and sawing. Vise styles are categorized by how the device is mounted. For example, bench vises mount to a benchtop; drill press vises bolt to a drill press; and woodworking vises fit underneath, on top, or to the side of a workbench. A vise's jaw opening and throat depth should be large enough for the workpiece. Yost Vises manufactures a wide range of vises, including bench-mount, woodworking, and drill-press styles. The company, founded in 1908, is headquartered in Holland, MI.
B0058EDY9W Price: $10.58 Score: 7.463 Category: Tools Rating: 4.3 Votes: 28 Find similar products Double Ended Pin Vise \| PIN-218.00. Known as Swiss style, this pin vise features two chucks. Capacity of 0 to 2.5mm (0 - .10). Length is 4-1/2.	B00UCHGLUO Price: $103.49 Score: 7.353 Category: Tools Rating: 5 Votes: 4 Find similar products Accusize Industrial Tools 3'' Precision Screwless Vise, Hardened, 0.0002'', 0235-0303. .
B0839H4S1F Availability: Currently unavailable Score: 7.194 Category: Tools Rating: 4.6 Votes: 34 Find similar products BestEquip Bench Vise, 6 Inch Multipurpose Vise, Kn25 360-Degree Rotation Heavy Duty 44lbs Vise Cast Iron Swivel Base, with Ground Anvil Vise Grip Table Vice Clamping Fixing Equipment. Swivel Bench Vise with Anvil A 6-inch rotating bench vise is the ideal industry light-duty vise that prevents water, dirt & rust. It can be used for home craftsmen, in the workshop, and even can be outdoor used. If the vise can be normally operated, it will be lifetime using. Light-Duty ConstructionSufficient Clamping Capacity Convenient Adjustment Precision & Hardness key FeaturesDurable MaterialBuilt by grey cast iron(HT200) material, the vise is more durable and harder when in use. Designed for long service time. Hardened Clamping JawsThe hardened jaw of HRC 46-52 jaw adjusts well to the workpieces to provide powerful clamping pressure while reducing marring for superior grip. Swivel BaseThe base of the vise can also rotate 360 degrees, allowing for optimal work placement. With fixing holes and pins, it can achieve stable operation. Quality Lead ScrewUpgraded lead screw with deep thread has good rust prevention, especially connected with a handle to operate the head of the vise. It can be rotated by 360 degrees. Large Ground AnvilThis large thickened work surface is machined smooth and designed for metal shaping or bending. Wide ApplicationIt can be used in the machine tool processing, industrial or household for clamping or fixing the workpiece. Specifications Material: HT200 Width of Jaw: 6'' Max Opening: 140mm/5.5'' Throat Depth: 75mm/3'' Clamping Force: Kn25Package Content 1 x Bench Vise 1 x Set of Screw.	B0824XQS3J Price: $24.99 Score: 7.194 Category: Tools Rating: 4.7 Votes: 5 Find similar products Baby Bench 40 mm Jaw width Easy Clamp Hobby Craft Jewelers Vise Vice For Filing, Polishing, Carving, Sanding. LIGHTWEIGHT & PORTABLE- This Mini table vise is lightweight weighing approx 1.4 Lbs. The Jaw width of this baby bench vice is 40 mm , which makes it incredibly portable to bring around in tool bags. SUPER DURABLE- This mini table vise is made of quality grade caste Iron, which makes it robust and durable. Vice will not break when dropped, and can last through years of use giving you an incredible investment. GREAT FOR CRAFTS & HOBBY- This vise is also great for hobbyist and crafters alike. Hold Small parts and models for detailing, painting, gluing, finishing and more. Hold small parts for soldering as well. GREAT FOR WOODWORKING- This vise is ideal for any small woodworking job or project that you may be working on. Clamp down any wooden block for sanding, grinding, detail, drilling, carving, chiseling, and much more EASY TO USE- This vise is very easy to use for anyone. Simply turn the bar on top to open and close the clamp onto a table surface and then turn the screw to securely clamp any small objects to work on.
B01AD5REIM Availability: Currently unavailable Score: 7.143 Category: Tools Rating: 5 Votes: 1 Find similar products 5 Bench Vise with Anvil Swivel Locking Base Table top Clamp Heavy Duty Steel. .	B0951TFCDZ Price: $31.32 Score: 6.993 Category: Tools Rating: 4.1 Votes: 1377 Find similar products SE 3 Universal Aluminum Table Vise 360 Degrees Rotating - 8436MVC. The SE 3 Universal Aluminum Table Vise 360 Degrees Rotating is designed to be lightweight yet durable enough to tackle the toughest of projects. The width of the vise jaws are 3 and they span open for a length of 2. These jaws are padded with rubber soles to comfortably secure your item in the vise. The overall dimensions are 11 by 6 by 3. A vise is a mechanical apparatus used to secure an object so that work can be performed on it. Vises have two parallel jaws (one fixed and the other movable) threaded in and out by a screw and lever. This tool was crafted with high quality materials to ensure that SE’s table vise will be the only one you need for all your metalworking, woodworking, and many other material-handling needs. *Note: This product is not for heavy-duty use. Important: Avoid getting counterfeit items. Genuine SE products come with our SE logo on the packaging. SE products are quality items for extremely reasonable prices. SE is committed to providing the customer with the best source for value possible on the market. You will enjoy the quality, function and usefulness this SE 3 Universal Aluminum Table Vise 360 Degrees Rotating has to offer. SE is a registered trademark protected by US Trademark Law.