FantasticSearch | E-commerce Search Demo

Scroll to: Top Results

E-commerce Search Demo

AI Assisted Filters

Positive filters:

Negative filters:

Category filter:

Parameters

Query:

Positive filters:

Negative filters:

Category filters: All

AI Assist: ON

Page: 1

Products

Time taken: 3 Max score: 1000.000 Total hits: 100 Full time: 0.0 s
Showing 1-10 of 100 products

B01MV5QTLJ Price: $32.15 Score: 1000.000 Category: Electronics Rating: 4.5 Votes: 58 Find similar products Dayton Audio DAEX30HESF-4 High Efficiency Steered Flux Exciter with Shielding 30mm 40W 4 Ohm. Quick Overview The DAEX30HESF-4 30 mm steered high flux exciter is one of the most powerful in Dayton Audios line of exciters capable of handling up to 40 watts. A pre-attached 3M VHB adhesive ring combines with four screw-down mounting tabs for maximum energy transfer. Product Highlights High output exciter design handles up to 40 watts RMS Specially designed neodymium motor and proprietary voice coil 3M™ VHB™ adhesive ring with four mounting holes Low inductance (only 0.3 mH) motor for extended response Product Manuals / Spec Sheets / Downloads Dayton Audio DAEX30HESF-4 Specification Sheet AddThis Sharing Buttons Share to FacebookFacebook Share to TwitterTwitter Share to MoreAddThis Product Description Dayton Audios DAEX30HESF-4 steered high flux exciter is one of our most powerful. It has a specially designed neodymium motor system that imparts strong forces on even the most rigid surface for maximum output. For use with medium sized amplifiers, this steered high flux exciter incorporates a 4 ohm voice coil to extract maximum power. A wide frequency response is permitted due to this exciters low inductance of only 0.3 mH. Four threaded screw holes are integrated into the exciters shell and combine with a 3M VHB (Very High Bond) adhesive, permitting this exciter to be securely coupled to a wide range of materials, even upside-down mounting and attaching to moving objects. Two solder tabs offer quick, permanent wire attachment. Note: An exciters frequency response and sensitivity are completely dependent on the exciters designated surface. Thinner, smaller materials will tend to be louder and create a mid/tweeter response. Thicker, larger materials (with multiple exciters) will be slightly quieter but result in a more full-range sound. To understand more about exciter technology, here is a link to the Exciters Buyers Guide . Product Details Speaker Series Exciters Model Number DAEX30HESF-4 List Price $29.99 Color Silver Unit of Measure Each UPC 848791001574 Warranty - Parts 5 Years Warranty - Labor 5 Years Product Shipping Weight (lbs.) 0.4 Speaker Type Exciter Power Handling (RMS) 40 watts Power Handling (max) -- Continuous Program Power -- Impedance 4 ohms Sensitivity -- Frequency Response -- Voice Coil Diameter 30 mm Magnet Weight -- DC Resistance (Re) 3.8 ohms Voice Coil Inductance (Le) 0.31 mH Resonant Frequency (Fs) 300 Hz Mechanical Q (Qms) -- Electromagnetic Q (Qes) -- Total Q (Qts) -- Diaphragm Mass Inc. Airload (Mms) -- Moving Mass Of Diaphragm (Mmd) -- Mechanical Compliance of Suspension (Cms) -- Surface Area Of Cone (Sd) -- Volume of Displacement (Vd) -- BL Product (BL) -- Compliance Equivalent Volume (Vas) -- Maximum Linear Excursion (Xmax) -- Drivers Mechanical Losses (Rms) -- Entry / Exit Diameter -- Surround Material -- Voice Coil Wire Material -- Voice Coil Former -- Basket/Frame Material -- Magnet Material -- Overall Outside Diameter 2.25 dia. (2.75 across mounting tabs) 1.25 adhesive tab dia. Overall Depth 1.125 H Baffle Cutout Diameter -- Mounting Hole Diameter -- Bolt Circle Diameter -- Product Weight --.	B072QYDPTZ Price: $10.98 Score: 9.901 Category: Electronics Rating: 3.5 Votes: 6 Find similar products Dayton Audio DAEX25QLP-4 Quad Feet Low Profile 25mm Exciter 10W 4 Ohm. Quick Overview Turn almost anything with a flat surface into a speaker. The Dayton Audio DAEX25QLP-4 4 ohm sound exciter improves power handling with a vented voice coil. Product Highlights Four arms provide extra support improving linearity 4 ohms impedance for use with small, Class D amplifiers Rare-earth neodymium motor and a proprietary vented voice coil Turns any flat, rigid surface into a speaker Product Manuals / Spec Sheets / Downloads Dayton Audio DAEX25QLP-4 Specification Sheet AddThis Sharing Buttons Share to FacebookFacebook Share to TwitterTwitter Share to MoreAddThis Product Description Dayton Audios DAEX25QLP-4 quad arm exciter is built with four arms that extend out from the main exciter body, which allows this exciter to transfer sound to a much larger surface for lower frequency response extension (more bass). Also, the arms help to support the magnet/voice coil improving linearity when mounted on horizontal surfaces. A neodymium magnet is employed to create maximum magnetic flux around the proprietary voice coil for increased sensitivity when compared to similar sized exciters. In turn, this reduces power requirements and makes it possible to use very small audio amplifiers, without sacrificing total output. The 1 voice coil allows for more input power, creating rich, dynamic sound. To ensure maximum acoustic energy transfer between the transducer and the surface to which it is attached, 3M VHB (Very High Bond) adhesive is pre-applied to the main body, and the four arms ... just peel and stick! Note: An exciters frequency response and sensitivity are completely dependent on the exciters designated surface. Thinner, smaller materials will tend to be louder and create a mid/tweeter response. Thicker, larger materials (with multiple exciters) will be slightly quieter but result in a more full-range sound. Specifications: • Power handling: 10 watts RMS • VCdia: 1 (25 mm) • Nominal impedance: 4 ohms • Re: 3.8 ohms • Le: 0.28 mH • Fs (uncoupled): 300 Hz • Dimensions: 2.75 (70 mm) overall diameter x 0.75 (19 mm) total height • Weight: 50 grams. To understand more about exciter technology, here is a link to the Exciters Buyers Guide . Product Details Speaker Series Exciters Model Number DAEX25QLP-4 List Price $10.99 Color Black Unit of Measure Each UPC 848791001772 Warranty - Parts 5 Years Warranty - Labor 5 Years Product Shipping Weight (lbs.) 0.167 Power Handling (RMS) 10 watts Power Handling (max) -- Continuous Program Power -- Impedance 4 ohms Sensitivity -- Frequency Response -- Voice Coil Diameter 25 mm Magnet Weight -- DC Resistance (Re) 3.8 ohms Voice Coil Inductance (Le) 0.28 mH @ 1 kHz Resonant Frequency (Fs) 300 Hz Mechanical Q (Qms) -- Electromagnetic Q (Qes) -- Total Q (Qts) -- Diaphragm Mass Inc. Airload (Mms) -- Moving Mass Of Diaphragm (Mmd) -- Mechanical Compliance of Suspension (Cms) -- Surface Area Of Cone (Sd) -- Volume of Displacement (Vd) -- BL Product (BL) -- Compliance Equivalent Volume (Vas) -- Maximum Linear Excursion (Xmax) -- Drivers Mechanical Losses (Rms) -- Entry / Exit Diameter -- Surround Material -- Voice Coil Wire Material -- Voice Coil Former -- Basket/Frame Material -- Magnet Material -- Overall Outside Diameter 70 mm Overall Depth 19 mm H Baffle Cutout Diameter -- Mounting Hole Diameter -- Bolt Circle Diameter -- Product Weight --.
B00GA7SYH8 Price: $19.7 Score: 8.547 Category: Electronics Rating: 4.1 Votes: 52 Find similar products Dayton Audio ND25FN-4 1 Silk Dome Neodymium Tweeter Element 4 Ohm. Quick Overview Compact soft dome tweeter element with high output and smooth, low-distortion sound. The high-strength neodymium motor features an aluminum heat sink for cool operation and reduced power compression. Product Highlights 1 treated silk dome diaphragm Faceplate-free design enables versatile custom mounting High-strength neodymium motor with heatsink and ferrofluid cooling Extremely smooth and extended treble response beyond 22kHz Perfect for use with a waveguide or custom mounting plate Product Manuals / Spec Sheets / Downloads Dayton Audio ND25FN-4 Specification Sheet Dayton Audio ND25FN-4 Data Files AddThis Sharing Buttons Share to FacebookFacebook Share to TwitterTwitter Share to MoreAddThis 2 Product Description Dayton Audio’s ND25FN-4 is a versatile 1” tweeter element for use in highly customized applications requiring smooth, clean treble output. The treated silk dome diaphragm delivers excellent detail and smoothness, while the high-strength neodymium magnet enables high output from an extremely compact size. The rear-mounted heatsink and ferrofluid-filled magnetic gap provide improved heat dissipation from the compact motor structure, for reduced power compression at high levels. A copper pole cap further reduces distortion and inductance effects. This element is identical to the round-faceplate ND25FA-4 model, but with no faceplate installed. It’s perfect for installation into a waveguide or a custom mounting plate, or in limited clearance applications such as automotive A-pillars. Simply bond the unit in place from behind, and prepare to be surprised at the clean, detailed output! Product Details Speaker Series ND Series Model Number ND25FN-4 List Price $19.99 Color Black Unit of Measure Each UPC 848791000867 Warranty - Parts 5 Years Warranty - Labor 5 Years Product Shipping Weight (lbs.) 0.13 Speaker Type Tweeter Power Handling (RMS) 20 watts Power Handling (max) 40 watts Continuous Program Power -- Impedance 4 ohms Sensitivity 90 dB @ 2.83V/1m Frequency Response 2 500 - 20 Voice Coil Diameter 25 mm Magnet Weight -- DC Resistance (Re) 3.3 ohms Voice Coil Inductance (Le) 0.05 mH Resonant Frequency (Fs) 1 290 Hz Mechanical Q (Qms) 4.61 Electromagnetic Q (Qes) 2.54 Total Q (Qts) 1.64 Diaphragm Mass Inc. Airload (Mms) -- Moving Mass Of Diaphragm (Mmd) -- Mechanical Compliance of Suspension (Cms) -- Surface Area Of Cone (Sd) 7.5 cm² Volume of Displacement (Vd) -- BL Product (BL) -- Compliance Equivalent Volume (Vas) -- Maximum Linear Excursion (Xmax) -- Drivers Mechanical Losses (Rms) -- Cone / Diaphragm Material Treated Silk Dome Entry / Exit Diameter -- Surround Material Treated Silk Voice Coil Wire Material Copper Voice Coil Former Kapton® Basket/Frame Material -- Magnet Material Neodymium Overall Outside Diameter 41 mm Overall Depth 21 mm Baffle Cutout Diameter 34 mm # Mounting Holes 4 Mounting Hole Diameter -- Bolt Circle Diameter -- Product Weight -- Cone / Dome Diameter 1.	B0002CNQ6Q Availability: Currently unavailable Score: 6.897 Category: Electronics Rating: 4.6 Votes: 26 Find similar products Rockford Fosgate P400-4 400 Watt 4-Channel Amplifier. Product Description Since day one, we have spearheaded the car audio revolution. Nothing has changed. Rockford Fosgate is still the global leader in audio innovation and your passion is our purpose. We engineer the best audio systems for your lifestyle! Amazon.com The P400-4 is perfect for 4-way front-stage/rear-fill or 3-way front-stage/subwoofer systems. Simply drop a pair of component speakers on the front channels and subs on the rear and BOOM--you got The PUNCH. With its flexible design, the P400-4 is an excellent amplifier choice for virtually any vehicle. Rockford Fosgate Punch Series Amplification For over 25 years, Punch amplifiers have set the standard in the car audio amplifier industry and they continue to do so today. It's the reason that they have become the most popular amplifiers in the world. Each of the Punch family amplifiers reproduce sonic perfection along with impressive power in a compact chassis. Perfect for 4-way front-stage/rear-fill or 3-way front-stage/subwoofer systems. Click to enlarge. All connections are recessed into the amplifier's chassis and located on the bottom edge of the P400-4, for a clean, uncluttered install that looks great in any car. Click to enlarge. P400-4 Features Features: 12dB/octave crossover 12dB/octave crossover 2/4 channel switch 2/4 channel switch 4 Gauge power/ground terminals 4 Gauge power/ground terminals Audiophile grade speaker connections Audiophile grade speaker connections MOSFET output stage MOSFET output stage MOSFET power supply MOSFET power supply Top Mounted LED Indicators CEA-2006 Compliant Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards. These guidelines mean your amplifier's output power ratings are REAL POWER numbers, not inflated marketing ratings. Differential Inputs Differential input circuitry measures the voltage of both the (+) and (-) input signal. The circuitry subtracts the voltage common to both conductors (noise) resulting in only the clean signal. This allows only clean signal to enter the amplifier. DSM (Discrete Surface Mount) DSM utilize 1% tight-tolerances improving efficiency of the circuit, decreases cross-talk from other discrete components and lowers operating temperature. Dynamic Thermal Management Evenly distributes excess heat across entire amplifier heatsink. MEHSA3 MEHSA3 reduces MOSFET temperatures, lowers distortion, increases durability and prolongs the output device life span. NOMAD NOMAD is a real time analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances. Punch EQ2 Onboard equalizer with up to +18dB @ 35Hz and/or up to +12dB boost at 12kHz. TO-247 MOSFETs Rockford Fosgate amps use custom TO-247 MOSFETs. These have 60% more metal tab area for more power capacity, lower impedance and improved heat dissipation over traditional TO-220 MOSFETs found in competitor amps. TRANS·ana Trans·ana simplifies the signal path of the amplifier allowing the signal to travel through the amplifier at a lower voltage. The result is greater reliability and exceptional sound quality. P400-4 SpecificationsNumber of Channels: 4 Rated Power: 50W x 4 @ 4-Ohms RMS 100W x 4 @ 2-Ohms RMS 200W x 2 @ 4-Ohms bridged RMS Total Power: 400 Watts Dynamic Power: Front Channels 86 Watts x 2 @ 4-Ohms 0 degrees Res 144 Watts x 2 @ 2-Ohms 0 degrees Res Rear Channels 85 Watts x 2 @ 4-Ohms 0 degrees Res 142 Watts x 2 @ 2-Ohms 0 degrees Res Bridgeable: Yes Efficiency (average): 71% @ 4-Ohm 70% @ 2-Ohm Crossover Controls: Front High-Pass (HP): 50-500Hz 24dB/octave Butterworth Front Low-Pass (LP): 50-500Hz 24dB/octave Butterworth Rear High-Pass (HP): 50-500Hz 24dB/octave Butterworth Rear Low-Pass (LP): 50-500Hz 24dB/octave Butterworth Tone Controls: Front Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or Front Punch EQ2 Treble: 0dB to +12dB @ 12kHz Rear Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or Rear Punch EQ2 Treble: 0dB to +12dB @ 12kHz Function depends upon LP/AP/HP switch position Signal Input: Low level: 2 RCA pair Signal Output: n/a Power Input Connector: Block Power Wire Gauge: 4 AWG Speaker Output Connector: Screw terminal barrier strip Speaker Wire Gauge: 8 AWG to 18 AWG Heat Sink Type: Cast aluminum Cooling: Convection Remote Controls: Optional PEQ Remote Punch EQ (overrides built-in Punch EQ2 for rear channels only) Visual Indicators: Power Thermal Protect Circuit Topology Class: Class A/B Frequency Response: 20Hz to 20kHz +/- 1dB Shipping Weight: 8.89 Lbs. (4.03 Kg.) Dimensions (HxWxL): 2.25 x 7.625 x 13.02 (in) 5.71 x 19.37 x 33.07 (cm) Thirty Years of Rockford Fosgate Rockford Fosgate products have been designed and engineered in Tempe, Arizona since the beginning. Rockford's 30 year reputation is grounded in engineering and manufacturing some of the finest audio products in the world. The company's no-compromise approach has yielded patented iconic products such as the Punch EQ, Punch 45 amplifier and the 3Sixty integrated signal processor. Today, Rockford's new products push the performance envelope even further. Each new product is a step forward--they sound bigger, they play louder, and run longer. Rockford never settles for good enough. The 2010 product line represents the company's core philosophy. Rockfords new amplifiers, speakers and subwoofers have raised the bar on the competition. What's in the Box Rockford Fosgate Punch P400-4 400-Watt Stereo Amplifier, User's Manual More Amplifier Options From Rockford Fosgate If you need more features, step up to the Power Series T400-4. On a Tighter Budget? Rockford's also got you covered. Consider the Prime Series R300-4. Rockford Fosgate Punch Series Power AmplifiersRockford Fosgate Punch P200-2 200-Watt Stereo Amplifier Rockford Fosgate Punch P300-1 300-Watt Mono Amplifer Rockford Fosgate Punch P300-2 300-Watt Stereo Amplifer Rockford Fosgate Punch P400-1 400 Watt Mono Amplifier Rockford Fosgate Punch P400-2 400-Watt Stereo Amplifier Rockford Fosgate Punch P400-4 400-Watt Multi Channel Amplifer Rockford Fosgate Punch P500-1BD 500-Watt Mono Amplifer Rockford Fosgate Punch P500-2 500-Watt Stereo Amplifer Rockford Fosgate Punch P500-4 500 Watt Multi Channel Amplifier Rockford Fosgate Punch P700-1BD 700 Watt Mono Amplifier Rockford Fosgate Punch P1000-1BD 1000-Watt Mono Amplifer Top Mounted LED Indicators CEA-2006 Compliant Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards. These guidelines mean your amplifier's output power ratings are REAL POWER numbers, not inflated marketing ratings. Differential Inputs Differential input circuitry measures the voltage of both the (+) and (-) input signal. The circuitry subtracts the voltage common to both conductors (noise) resulting in only the clean signal. This allows only clean signal to enter the amplifier. DSM (Discrete Surface Mount) DSM utilize 1% tight-tolerances improving efficiency of the circuit, decreases cross-talk from other discrete components and lowers operating temperature. Dynamic Thermal Management Evenly distributes excess heat across entire amplifier heatsink. MEHSA 3 MEHSA 3 reduces MOSFET temperatures, lowers distortion, increases durability and prolongs the output device life span. NOMAD NOMAD is a real time analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances. Punch EQ2 Onboard equalizer with up to +18dB @ 35Hz and/or up to +12dB boost at 12kHz. TO-247 MOSFETs Rockford Fosgate amps use custom TO-247 MOSFETs. These have 60% more metal tab area for more power capacity, lower impedance and improved heat dissipation over traditional TO-220 MOSFETs found in competitor amps. TRANS·ana Trans·ana simplifies the signal path of the amplifier allowing the signal to travel through the amplifier at a lower voltage. The result is greater reliability and exceptional sound quality. P400-4 Specifications Number of Channels: 4 Rated Power: 50W x 4 @ 4-Ohms RMS 100W x 4 @ 2-Ohms RMS 200W x 2 @ 4-Ohms bridged RMS Total Power: 400 Watts Dynamic Power: Front Channels 86 Watts x 2 @ 4-Ohms 0 degrees Res 144 Watts x 2 @ 2-Ohms 0 degrees Res Rear Channels 85 Watts x 2 @ 4-Ohms 0 degrees Res 142 Watts x 2 @ 2-Ohms 0 degrees Res Bridgeable: Yes Efficiency (average): 71% @ 4-Ohm 70% @ 2-Ohm Crossover Controls: Front High-Pass (HP): 50-500Hz 24dB/octave Butterworth Front Low-Pass (LP): 50-500Hz 24dB/octave Butterworth Rear High-Pass (HP): 50-500Hz 24dB/octave Butterworth Rear Low-Pass (LP): 50-500Hz 24dB/octave Butterworth Tone Controls: Front Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or Front Punch EQ2 Treble: 0dB to +12dB @ 12kHz Rear Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or Rear Punch EQ2 Treble: 0dB to +12dB @ 12kHz Function depends upon LP/AP/HP switch position Signal Input: Low level: 2 RCA pair Signal Output: n/a Power Input Connector: Block Power Wire Gauge: 4 AWG Speaker Output Connector: Screw terminal barrier strip Speaker Wire Gauge: 8 AWG to 18 AWG Heat Sink Type: Cast aluminum Cooling: Convection Remote Controls: Optional PEQ Remote Punch EQ (overrides built-in Punch EQ2 for rear channels only) Visual Indicators: Power Thermal Protect Circuit Topology Class: Class A/B Frequency Response: 20Hz to 20kHz +/- 1dB Shipping Weight: 8.89 Lbs. (4.03 Kg.) Dimensions (HxWxL): 2.25 x 7.625 x 13.02 (in) 5.71 x 19.37 x 33.07 (cm) Thirty Years of Rockford Fosgate Rockford Fosgate products have been designed and engineered in Tempe, Arizona since the beginning. Rockford's 30 year reputation is grounded in engineering and manufacturing some of the finest audio products in the world. The company's no-compromise approach has yielded patented iconic products such as the Punch EQ, Punch 45 amplifier and the 3Sixty integrated signal processor. Today, Rockford's new products push the performance envelope even further. Each new product is a step forward--they sound bigger, they play louder, and run longer. Rockford never settles for good enough. The 2010 product line represents the company's core philosophy. Rockfords new amplifiers, speakers and subwoofers have raised the bar on the competition. What's in the Box Rockford Fosgate Punch P400-4 400-Watt Stereo Amplifier, User's Manual More Amplifier Options From Rockford Fosgate If you need more features, step up to the Power Series T400-4 . On a Tighter Budget? Rockford's also got you covered. Consider the Prime Series R300-4 . Rockford Fosgate Punch Series Power Amplifiers Rockford Fosgate Punch P200-2 200-Watt Stereo Amplifier Rockford Fosgate Punch P300-1 300-Watt Mono Amplifer Rockford Fosgate Punch P300-2 300-Watt Stereo Amplifer Rockford Fosgate Punch P400-1 400 Watt Mono Amplifier Rockford Fosgate Punch P400-2 400-Watt Stereo Amplifier Rockford Fosgate Punch P400-4 400-Watt Multi Channel Amplifer Rockford Fosgate Punch P500-1BD 500-Watt Mono Amplifer Rockford Fosgate Punch P500-2 500-Watt Stereo Amplifer Rockford Fosgate Punch P500-4 500 Watt Multi Channel Amplifier Rockford Fosgate Punch P700-1BD 700 Watt Mono Amplifier Rockford Fosgate Punch P1000-1BD 1000-Watt Mono Amplifer From the Manufacturer From the Manufacturer Manufacturer's Description (November 1, 2008) If you're considering a new car audio system or just want to upgrade your current system, Rockford Fosgate equipment is a solid foundation on which to build. Rockford is one of the oldest and most respected brands in car audio history, and has been pumping out high quality, great-sounding gear since 1973. By pioneering ideas like the Punch EQ (boosting frequencies below 45Hz and above 20Khz for improved in-car music response) and using MOSFET circuitry to power in-car amplifiers, Rockford Fosgate paved the way for modern in-car electronics and hasn't slowed down since. The P400-4 features an ultra-small small footprint, and a clean, simple design that looks great no matter where it's installed. Dynamic Thermal Management ensures even heat dissipation across the entire heatsink for maximum efficiency and cooling. Rockford Fosgate amplifiers combine raw, clean power, with sleek, smart designs that are easy to install and look great in any car. All Rockford amps are CES-2006 compliant, which means the power listed is the actual power delivered, and each amp includes a birth certificate to prove it. But don't let the small size fool you; this petite powerhouse, which can easily fit under any seat, packs quite a punch! The P400-4 is the perfect companion for two pairs of coaxial or component speakers, or a pair of speakers and a simple subwoofer system. The P400-4 delivers 50 watts of clean power to for channels in stereo mode, or 200 watts per channel when bridged down to a two channel amp. But what exactly sets a Rockford Fosgate amplifier apart from the competition? Plenty. Keeping Things Clean and Cool The amplifier's job is to produce power, and lots of it. But a side effect of creating power is heat, and that is an electronic component's worst enemy. Rockford tackles this problem by incorporating a cast aluminum heat sink, Dynamic Thermal Management, and MEHSA³ technology to every amplifier, resulting in a significant reduction of the amplifier's operating temperature. The cast aluminum heat sink surrounds three of the four sides of the amplifier's circuit board, which maximizes the cooling surface area, and since the heat sink is cast it offers 30% better cooling ability over extruded designs. When combined with Rockford's patented Dynamic Thermal Management (DTM), cooling efficiency is taken one step further. DTM distributes heat evenly across the heat sink where other heat sink designs can create dangerous hot spots in the amplifier. Rockford also developed MEHSA³ technology for the MOSFET (metal–oxide–semiconductor field-effect transistor ) power transistors. MEHSA³ (Maximum Efficiency Heat Sink Application- Third Generation) maximizes heat transfer from the MOSFETs to the heat sink for up to five times better heat transfer. By keeping the internal components cool, the amplifier maximizes efficiency, produces more power, and reduces distortion for increased sound quality. Not only does the P400-4 produce lots of clean power, it also delivers exceptional sound quality. Differential input circuitry measures the positive and negative input signal as it enters the amp and subtracts the voltage common to both conductors (noise), resulting in a crisp, clean signal for maximum sound quality. The use of TRANS-ana circuitry, borrowed from pro-audio company, Hafler, also adds to the sound quality recipe. The TRANS-ana circuit simplifies the audio signal and allows it to travel through the amplifier as a low voltage signal before it reaches the amplification stage. This improves the sound quality of the signal, delivers cleaner performance, and improved reliability. The P400-4's TO-247 MOSFET power transistors offer 60% more metal tab area than the industry standard TO-220 MOSFETs, which means more power, better cooling, and improved sound quality. Once the signal reaches the amplification stage, it's greeted by much beefier MOSFETs than what is traditionally used in most amplifiers. Rockford uses TO-247 MOSFETs compared to the somewhat standard and less efficient TO-220 MOSFETs. TO-247s offer 60% more metal tab area, which means more power capacity, better heat dissipation, and lower impedance capability. In other words, these things produce some serious power with very little effort. Sound Shaping and Equalization Upgrading speakers and adding subwoofers will always improve your sound system, but in order to maximize how well the speaker performs requires a bit of equalization and sound shaping. Door and dash speakers can play a pretty broad range of frequencies, but realistically cannot produce the ultra-low frequencies that a subwoofer is designed to produce. Just the opposite is true for a subwoofer. It cannot produce mid or high frequencies well; its job is to pump out gut-punching bass. To make sure your speakers are working at their maximum efficiency, Rockford incorporated a fully variable 12db high-pass and low-pass crossover into the 400-4. With a twist of the dial, the high-pass crossover can be adjusted to eliminate any frequencies below a certain point between 50Hz and 500Hz. If using the 400-4 for a subwoofer system, switch on the low-pass crossover and adjust the crossover to eliminate higher frequencies, adjustable between 50HZ and 500Hz. The Punch EQ can be tweaked to deliver up to an 18dB increase at 45Hz for subwoofers, or up to a 12dB increase at 12kHz for speakers. This improves overall sound quality and overcomes audio response problems common to the automotive environment. Rockford Fosgate built a reputation around the Punch EQ, which is incorporated into their Punch amplifiers, and allows the amp to better shape the sound quality of your speaker or subwoofer system. When using the high-pass crossover, the Punch EQ can boost high frequencies above 12kHz anywhere from 0-12dB. This frequency range is often lost to road noise and other factors, and the Punch EQ allows you to dial up that range for perfect sound. If the low-pass filter is on, the Punch EQ can add a bit of boost (up to 18dB) to the 45Hz frequency range. This gives you the ability to dial in a little extra rib-rattling bass to your music that can be lost due to the compact size of most car interiors. Making the Connection All controls and connections are located on one edge of the amplifier, making it easy to access all controls and guaranteeing an easy, clutter-free installation. The P400-4 will accept up to 4-gauge power and ground wire, and all connections are neatly housed in c-clamp type connectors that terminate inside the amp's chassis. This adds a cleaner appearance to your install and ensures no fly-away wires can stray to other terminals causing possible shorts. All connections are recessed into the amplifier's chassis and located on the bottom edge of the P400-4, for a clean, uncluttered install that looks great in any car. Speaker connections also use a similar clean audiophile design, and will accept up to 12-gauge wire for maximum signal transfer to your speakers or subs. The amp features a single RCA connection flush with the amp's chassis, further enhancing the overall clean appearance. An RJ-45 jack is for connecting an optional remote-mounted Punch EQ control and is located next to the crossover and Punch EQ controls. The remote PEQ controller can be installed up front and within easy reach to give you on-the-fly control of your Punch EQ settings. Pushing Power The P400-4 is a flexible amplifier and is stable at two-ohms. This amp is perfect for powering front and rear speakers in four-channel mode, delivering 50 watts of clean power to each speaker. Or you can mix things up a bit and use the P400-4 to drive two front coaxial or component speakers at 50 watts RMS and bridge the rear channel to deliver 200 watts to a subwoofer. What’s in the Box P400-4 amplifier, Installation & operation manual, Warranty See more.
B00AZTTW7S Availability: Currently unavailable Score: 6.711 Category: Electronics Rating: 5 Votes: 1 Find similar products XXX Ground Loop Isolator, Model#: XR16. XXX 160 Watt High Frequency Mini Tweeter.	B0039OGNF0 Availability: Currently unavailable Score: 6.711 Category: Electronics Rating: 3.5 Votes: 10 Find similar products Rockford Fosgate Punch 500-Watt Stereo Amplifier. Product Description Since day one, we have spearheaded the car audio revolution. Nothing has changed. Rockford Fosgate is still the global leader in audio innovation and your passion is our purpose. We engineer the best audio systems for your lifestyle! Amazon.com Whether you're looking to drive high frequency component speakers or low frequency subwoofers, the P500-2 has the power and flexibility you need to put some serious PUNCH in your vehicle. The power available from such a small amp means it's a great match for a 2-ohm DVC subwoofer or pair of 8-ohm SVC subwoofers. Rockford Fosgate Punch Series Amplification For over 25 years, Punch amplifiers have set the standard in the car audio amplifier industry and they continue to do so today. It's the reason that they have become the most popular amplifiers in the world. Each of the Punch family amplifiers reproduce sonic perfection along with impressive power in a compact chassis. The P500-2 has the power and flexibility you need to put some serious PUNCH in your vehicle. Click to enlarge. All connections are recessed into the amplifier's chassis and located on the bottom edge of the P500-2, for a clean, uncluttered install that looks great in any car. Click to enlarge. P500-2 Features Features: 12dB/octave crossover 12dB/octave crossover 4 Gauge power/ground terminals 4 Gauge power/ground terminals Audiophile grade speaker connections Audiophile grade speaker connections MOSFET output stage MOSFET output stage MOSFET power supply MOSFET power supply RCA pass-thru RCA pass-thru Top Mounted LED Indicators CEA-2006 Compliant Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards. These guidelines mean your amplifier's output power ratings are REAL POWER numbers, not inflated marketing ratings. Differential Inputs Differential input circuitry measures the voltage of both the (+) and (-) input signal. The circuitry subtracts the voltage common to both conductors (noise) resulting in only the clean signal. This allows only clean signal to enter the amplifier. DSM (Discrete Surface Mount) DSM utilize 1% tight-tolerances improving efficiency of the circuit, decreases cross-talk from other discrete components and lowers operating temperature. Dynamic Thermal Management Evenly distributes excess heat across entire amplifier heatsink. MEHSA3 MEHSA3 reduces MOSFET temperatures, lowers distortion, increases durability and prolongs the output device life span. NOMAD NOMAD is a real time analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances. Punch EQ2 Onboard equalizer with up to +18dB @ 35Hz and/or up to +12dB boost at 12kHz. TO-247 MOSFETs Rockford Fosgate amps use custom TO-247 MOSFETs. These have 60% more metal tab area for more power capacity, lower impedance and improved heat dissipation over traditional TO-220 MOSFETs found in competitor amps. TRANS·ana Trans·ana simplifies the signal path of the amplifier allowing the signal to travel through the amplifier at a lower voltage. The result is greater reliability and exceptional sound quality. P500-2 SpecificationsNumber of Channels: 2 Rated Power: 125 Watts RMS x 2 @ 4-Ohms 250 Watts RMS x 2 @ 2-Ohms 500 Watts RMS x 1 @ 4-Ohms Bridged/Mono Total Power: 500 Watts Dynamic Power: 229 Watts x 2 @ 4-Ohms 0 degrees Res 371 Watts x 2 @ 2-Ohms 0 degrees Res Bridgeable: Yes Efficiency (average): 71% @ 4-Ohm 66% @ 2-Ohm Crossover Controls: High-Pass (HP): 50Hz-500Hz 12dB/octave Butterworth Low-Pass (LP): 50-500Hz 12dB/octave Butterworth Tone Controls: Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or Punch EQ2 Treble: 0dB to +12dB @ 12kHz Function depends upon LP/AP/HP switch position Signal Input: Low level: 1 RCA pair Signal Output: Low level: 1 RCA pair Power Input Connector: Block Power Wire Gauge: 4 AWG Speaker Output Connector: Screw terminal barrier strip Speaker Wire Gauge: 8 AWG to 18 AWG Heat Sink Type: Cast aluminum Cooling: Convection Remote Controls: Optional PEQ Remote Punch EQ (overrides built-in Punch EQ2) Visual Indicators: Power Thermal Protect Circuit Topology Class: Class A/B Frequency Response: 20Hz to 20kHz +/- 1dB Shipping Weight: 8.89 Lbs. (4.03 Kg.) Dimensions (HxWxL):2.25 x 7.625 x 13.02 (in) 5.71 x 19.37 x 33.07 (cm)Thirty Years of Rockford Fosgate Rockford Fosgate products have been designed and engineered in Tempe, Arizona since the beginning. Rockford's 30 year reputation is grounded in engineering and manufacturing some of the finest audio products in the world. The company's no-compromise approach has yielded patented iconic products such as the Punch EQ, Punch 45 amplifier and the 3Sixty integrated signal processor. Today, Rockford's new products push the performance envelope even further. Each new product is a step forward--they sound bigger, they play louder, and run longer. Rockford never settles for good enough. The 2010 product line represents the company's core philosophy. Rockfords new amplifiers, speakers and subwoofers have raised the bar on the competition. What's in the Box Rockford Fosgate Punch P500-2 500-Watt Stereo Amplifier, User's Manual Need More Amp? If you need more features, step up to the Power Series T600-2. Rockford Fosgate Punch Series Power AmplifiersRockford Fosgate Punch P200-2 200-Watt Stereo Amplifier Rockford Fosgate Punch P300-1 300-Watt Mono Amplifer Rockford Fosgate Punch P300-2 300-Watt Stereo Amplifer Rockford Fosgate Punch P400-1 400 Watt Mono Amplifier Rockford Fosgate Punch P400-2 400-Watt Stereo Amplifier Rockford Fosgate Punch P400-4 400-Watt Multi Channel Amplifer Rockford Fosgate Punch P500-1BD 500-Watt Mono Amplifer Rockford Fosgate Punch P500-2 500-Watt Stereo Amplifer Rockford Fosgate Punch P500-4 500 Watt Multi Channel Amplifier Rockford Fosgate Punch P700-1BD 700 Watt Mono Amplifier Rockford Fosgate Punch P1000-1BD 1000-Watt Mono Amplifer Top Mounted LED Indicators CEA-2006 Compliant Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards. These guidelines mean your amplifier's output power ratings are REAL POWER numbers, not inflated marketing ratings. Differential Inputs Differential input circuitry measures the voltage of both the (+) and (-) input signal. The circuitry subtracts the voltage common to both conductors (noise) resulting in only the clean signal. This allows only clean signal to enter the amplifier. DSM (Discrete Surface Mount) DSM utilize 1% tight-tolerances improving efficiency of the circuit, decreases cross-talk from other discrete components and lowers operating temperature. Dynamic Thermal Management Evenly distributes excess heat across entire amplifier heatsink. MEHSA 3 MEHSA 3 reduces MOSFET temperatures, lowers distortion, increases durability and prolongs the output device life span. NOMAD NOMAD is a real time analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances. Punch EQ2 Onboard equalizer with up to +18dB @ 35Hz and/or up to +12dB boost at 12kHz. TO-247 MOSFETs Rockford Fosgate amps use custom TO-247 MOSFETs. These have 60% more metal tab area for more power capacity, lower impedance and improved heat dissipation over traditional TO-220 MOSFETs found in competitor amps. TRANS·ana Trans·ana simplifies the signal path of the amplifier allowing the signal to travel through the amplifier at a lower voltage. The result is greater reliability and exceptional sound quality. P500-2 Specifications Number of Channels: 2 Rated Power: 125 Watts RMS x 2 @ 4-Ohms 250 Watts RMS x 2 @ 2-Ohms 500 Watts RMS x 1 @ 4-Ohms Bridged/Mono Total Power: 500 Watts Dynamic Power: 229 Watts x 2 @ 4-Ohms 0 degrees Res 371 Watts x 2 @ 2-Ohms 0 degrees Res Bridgeable: Yes Efficiency (average): 71% @ 4-Ohm 66% @ 2-Ohm Crossover Controls: High-Pass (HP): 50Hz-500Hz 12dB/octave Butterworth Low-Pass (LP): 50-500Hz 12dB/octave Butterworth Tone Controls: Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or Punch EQ2 Treble: 0dB to +12dB @ 12kHz Function depends upon LP/AP/HP switch position Signal Input: Low level: 1 RCA pair Signal Output: Low level: 1 RCA pair Power Input Connector: Block Power Wire Gauge: 4 AWG Speaker Output Connector: Screw terminal barrier strip Speaker Wire Gauge: 8 AWG to 18 AWG Heat Sink Type: Cast aluminum Cooling: Convection Remote Controls: Optional PEQ Remote Punch EQ (overrides built-in Punch EQ2) Visual Indicators: Power Thermal Protect Circuit Topology Class: Class A/B Frequency Response: 20Hz to 20kHz +/- 1dB Shipping Weight: 8.89 Lbs. (4.03 Kg.) Dimensions (HxWxL): 2.25 x 7.625 x 13.02 (in) 5.71 x 19.37 x 33.07 (cm) Thirty Years of Rockford Fosgate Rockford Fosgate products have been designed and engineered in Tempe, Arizona since the beginning. Rockford's 30 year reputation is grounded in engineering and manufacturing some of the finest audio products in the world. The company's no-compromise approach has yielded patented iconic products such as the Punch EQ, Punch 45 amplifier and the 3Sixty integrated signal processor. Today, Rockford's new products push the performance envelope even further. Each new product is a step forward--they sound bigger, they play louder, and run longer. Rockford never settles for good enough. The 2010 product line represents the company's core philosophy. Rockfords new amplifiers, speakers and subwoofers have raised the bar on the competition. What's in the Box Rockford Fosgate Punch P500-2 500-Watt Stereo Amplifier, User's Manual Need More Amp? If you need more features, step up to the Power Series T600-2 . Rockford Fosgate Punch Series Power Amplifiers Rockford Fosgate Punch P200-2 200-Watt Stereo Amplifier Rockford Fosgate Punch P300-1 300-Watt Mono Amplifer Rockford Fosgate Punch P300-2 300-Watt Stereo Amplifer Rockford Fosgate Punch P400-1 400 Watt Mono Amplifier Rockford Fosgate Punch P400-2 400-Watt Stereo Amplifier Rockford Fosgate Punch P400-4 400-Watt Multi Channel Amplifer Rockford Fosgate Punch P500-1BD 500-Watt Mono Amplifer Rockford Fosgate Punch P500-2 500-Watt Stereo Amplifer Rockford Fosgate Punch P500-4 500 Watt Multi Channel Amplifier Rockford Fosgate Punch P700-1BD 700 Watt Mono Amplifier Rockford Fosgate Punch P1000-1BD 1000-Watt Mono Amplifer.
B074XNDT35 Price: $8.99 Score: 6.667 Category: Electronics Rating: 3.1 Votes: 23 Find similar products KNACRO DC 10V-24V Low-Pass Filter NE5532 Bass Tone Subwoofer Pre-Amplifier Preamp Board. Power supply voltage: DC12V-24V DC single power supply. Frequency range: 22Hz-300Hz. Audio input: mono or two-channel. Audio output: monaural. PCB Size: 78x32mm, thickness: 1.6mm. PCB Materials: FR-4 ultra-hard glass plate. Finished plate net weight: 30g. Plate mounting holes center to center spacing: 70x24mm, hole diameter: 3.2mm. Potentiometer shaft center to center spacing: 32.5mm. Special reminder: This board is a board bass preamp, directly connected to the speaker will not say anything, must be connected to the subsequent stage amplifier board made of pure active subwoofer to speak, pure stage power amplifier board selected according to individual needs of the degree of shock, The greater the power of pure power amp bass more shocking. The so-called low-pass filter plate is to filter the human voice more than treble part, retain the low frequency part is amplified to improve the bass reproduction efforts will not hear the human voice and high-frequency sound when playing the instrument. The buyer must understand this knowledge, in order to avoid the only, do not know how to use. Most of the market before the subwoofer preamp board are basically dual power, the majority of DIY enthusiasts, is not very convenient to use, after all, a single power supply is relatively easy to find, the premise of guaranteeing effective, we have introduced a single-supply subwoofer home board, you can share a stage with the power amplifier boards, DIY is very convenient. Package included: 1 x Low-pass Filter NE5532 (with 2 rotary potentiometer cap).	B0BZTG2T4D Price: $15.99 Score: 6.579 Category: Electronics Rating: 4.4 Votes: 23 Find similar products 5 CORE Compression Driver 1 Exit Screw-On Horn 200W PMPO Tweeter Driver Unit High Frequency 8 Ohms 1 Voice Coil 108dB Also-for Car Audio Speaker System 5C-D26. .
B00BQO0C7K Availability: Currently unavailable Score: 6.452 Category: Electronics Rating: 2.8 Votes: 13 Find similar products Lanzar 4,000 Watt Car Power Amplifier - 4-Channel SMD Class A/B MOSFET, RCA Input, Amp Power Supply, Bass Boost, Mobile Audio, Amplifier for Car Speakers, Car Electronics, Crossover Network EV484. Lanzar Model : EV484 4,000 Watt 4 Channel SMD Class AB Power Amplifier 4 x 500 Watts RMS Power at 4 Ohms 4 x 500 Watts RMS Power at 4 Ohms 4 x 1,000 Watts Peak Power at 4 Ohms 4 x 1,000 Watts Peak Power at 4 Ohms 2 x 1,000 Watts RMS Power at 4 Ohm Bridged 2 x 1,000 Watts RMS Power at 4 Ohm Bridged 2 x 2,000 Watts Peak Power at 4 Ohm Bridged 2 x 2,000 Watts Peak Power at 4 Ohm Bridged Variable Low Pass Filter : 50Hz - 500Hz Variable Low Pass Filter : 50Hz - 500Hz Variable High Pass Filter : 50Hz - 500Hz Variable High Pass Filter : 50Hz - 500Hz Variable Bass Boost : 0 - 18dB@60Hz FIX Variable Bass Boost : 0 - 18dB@60Hz FIX Input Sensitivity: Low: 200mV-6V, High: 400mV~12V Input Sensitivity: Low: 200mV-6V, High: 400mV~12V THD : <0.05% THD : <0.05% S/N Ratio : >100dB S/N Ratio : >100dB Channel Separation : >60dB Channel Separation : >60dB Frequency Response : 15Hz - 40KHz Frequency Response : 15Hz - 40KHz Electronic Crossover Network Electronic Crossover Network Bridgeable at 4 Ohms Bridgeable at 4 Ohms 2 Ohm Stereo Stable 2 Ohm Stereo Stable Tri-mode Capable Tri-mode Capable Double Side Epoxy PCB Circuit Board Double Side Epoxy PCB Circuit Board Nickel Plated RCA Inputs Nickel Plated RCA Inputs Line Outs For Left and Right Channels Line Outs For Left and Right Channels Low Pass Filter Controls Low Pass Filter Controls High Pass Filter Controls High Pass Filter Controls Power & Protection LED Indicator Power & Protection LED Indicator Thermal, Over load & Speaker Short Protection Thermal, Over load & Speaker Short Protection Soft Turn-on/Turn-Off Soft Turn-on/Turn-Off Top Control PANNEL GREEN Illumination Top Control PANNEL GREEN Illumination Fuse Rating: 40A x 3 Fuse Rating: 40A x 3 Dimensions: 8.97''(W) x 2.41''(H) x 17.16''(L) Dimensions: 8.97''(W) x 2.41''(H) x 17.16''(L) Lanzar's New Evolution Series Amplifiers provide high-performance sound reinforcement for all of your mobile audio equipment. The versatility enables compatibility with optional equalizers, frequency dividing crossover networks and other audio processors to improve virtually any vehicle's customized system configuration. Select model Amplifier features include variable high and low pass filters, hi-tech SMD circuitry, nickel-plated RCA inputs, double-sided epoxy PCB circuit boards, bass boost variability, and plenty more features to evolve your audio.	B0006B4ZS6 Price: $25.93 Score: 6.410 Category: Electronics Rating: 4.5 Votes: 18 Find similar products Dayton Audio ND20FA-6 3/4 Soft Dome Neodymium Tweeter. Quick Overview This versatile tweeter is a huge step above the average budget tweeter. It has the sensitivity, smoothness, and power handling to individually do a two-way with most small woofers. Product Highlights Compact neodymium motors have low stray field Ferrofluid enhances power handling and helps damp resonance Front-mount pressfit design Center-to-center spacing as low as 1-3/4 Extremely flat and extended response Product Manuals / Spec Sheets / Downloads Dayton Audio ND20FA-6 Specification Sheet Dayton Audio ND20FA-6 Data Files AddThis Sharing Buttons Share to FacebookFacebook Share to TwitterTwitter Share to MoreAddThis Product Description Dont let the low price fool you! This versatile tweeter is a huge step above the average budget tweeter. Conceived with line array thoughts in mind, it is finally possible to achieve the inter-driver spacing needed to minimize comb filtering out to nearly 20 kHz. But its uses dont stop at line arrays-- it has the sensitivity, smoothness, and power handling to individually do a two-way with most small woofers. Or, use it in an A-pillar in your car as a great inexpensive component tweeter. Give them a try for your next budget or micro speaker-- you will be pleasantly surprised! Product Details Speaker Series ND Series Model Number ND20FA-6 List Price $19.99 Color Black Unit of Measure Each UPC 844632000874 Warranty - Parts 5 Years Warranty - Labor 5 Years Product Shipping Weight (lbs.) 0.1 Speaker Type Tweeter Nominal Diameter .75 Power Handling (RMS) 15 watts Power Handling (max) 30 watts Continuous Program Power -- Impedance 6 ohms Sensitivity 90 dB @ 1W/1m Frequency Response 3 500 - 25 Voice Coil Diameter 19 mm Magnet Weight -- DC Resistance (Re) 5.2 ohms Voice Coil Inductance (Le) 0.05 mH Resonant Frequency (Fs) 2 005 Hz Mechanical Q (Qms) 1.5 Electromagnetic Q (Qes) 2.88 Total Q (Qts) 0.99 Diaphragm Mass Inc. Airload (Mms) -- Moving Mass Of Diaphragm (Mmd) -- Mechanical Compliance of Suspension (Cms) -- Surface Area Of Cone (Sd) 2.8 cm² Volume of Displacement (Vd) -- BL Product (BL) -- Compliance Equivalent Volume (Vas) -- Maximum Linear Excursion (Xmax) -- Drivers Mechanical Losses (Rms) -- Cone / Diaphragm Material Textile Soft Dome Entry / Exit Diameter -- Surround Material -- Voice Coil Wire Material Copper Voice Coil Former Aluminum Basket/Frame Material -- Magnet Material Neodymium Overall Outside Diameter 45 mm Overall Depth 15 mm Baffle Cutout Diameter 33 mm Mounting Hole Diameter -- Bolt Circle Diameter -- Product Weight -- Cone / Dome Diameter 3/4.