FantasticSearch | E-commerce Search Demo

Scroll to: Top Results

E-commerce Search Demo

AI Assisted Filters

Positive filters:

Negative filters:

Category filter:

Parameters

Query:

Positive filters:

Negative filters:

Category filters: All

AI Assist: ON

Page: 1

Products

Time taken: 3 Max score: 1000.000 Total hits: 600 Full time: 0.0 s
Showing 1-10 of 600 products

B075F9X3L8 Price: $25.95 Score: 1000.000 Category: Tools Rating: 3.8 Votes: 8 Find similar products FlexTrim #126: 1/2 x 3/4 Flexible Base Shoe Molding - 12 feet long. Conventional woodworking tools can be used with this material. Always install moulding in a relaxed position. Use construction or panel adhesive continuously on the backside and nails to secure moulding in place until adhesive bonds. Remember – do not use staples to fasten material, keep nails to a minimum (no closer than 6 inches between nails), and do not nail closer than 3/8 inch from edge of moulding. Flex Trim is stable and will not absorb moisture and is ideal for humid environments. It is not affected by heat or cold and can withstand extreme environments. ALWAYS lay out the material to let it relax back into its original shape; this is a good time to double-check molding style and application. NEVER pre-finish the material prior to installation. The material may flex during installation and cause fractures in the finish. ALWAYS make certain that the surface you are applying the material to is flat and smooth. Flexible molding will follow any irregularities in the surface. NEVER use staples or nails with large heads. Keep nails to a minimum and away from edges to avoid bumps at the edge. ALWAYS use a construction adhesive in conjunction with (or in lieu of) nails or screws. This will ensure a quick and easy application and a cleaner finished look.	B07RF49H12 Price: $17.95 Score: 13.699 Category: Tools Rating: 4.4 Votes: 320 Find similar products FLEXTRIM #WM108: 1/2 x 1/2 Flexible Quarter Round - 8 feet long (96 long). Flexible Quarter Round Molding: 1/2 x 1/2 and at least 96 long (at least 8 feet long). Waterproof - use inside and outside - VERY durable. Conventional woodworking tools can be used with this material. Always install moulding in a relaxed position. Use construction or panel adhesive continuously on the backside and nails to secure moulding in place until adhesive bonds. Remember – do not use staples to fasten material, keep nails to a minimum (no closer than 6 inches between nails), and do not nail closer than 3/8 inch from edge of moulding. Flex Trim is stable and will not absorb moisture and is ideal for humid environments. It is not affected by heat or cold and can withstand extreme environments. ALWAYS lay out the material to let it relax back into its original shape; this is a good time to double-check molding style and application. NEVER pre-finish the material prior to installation. The material may flex during installation and cause fractures in the finish. ALWAYS make certain that the surface you are applying the material to is flat and smooth. Flexible molding will follow any irregularities in the surface. NEVER use staples or nails with large heads. Keep nails to a minimum and away from edges to avoid bumps at the edge. ALWAYS use a construction adhesive in conjunction with (or in lieu of) nails or screws. This will ensure a quick and easy application and a cleaner finished look.
B07LGFJX5W Price: $25.95 Score: 11.236 Category: Tools Rating: 4.7 Votes: 24 Find similar products FLEXTRIM #WM126-OAK Grain: 1/2 x 3/4 Flexible Base Shoe molding - 12' feet Long - Oak Grain Texture. FLEXTRIM #WM126-OAK Grain: 1/2 x 3/4 Flexible Base Shoe molding - 12' feet Long - Oak Grain Texture. Flexible polyurethane material. Conventional woodworking tools can be used with this material. Always install moulding in a relaxed position. Use construction or panel adhesive continuously on the backside and nails to secure moulding in place until adhesive bonds. Remember – do not use staples to fasten material, keep nails to a minimum (no closer than 6 inches between nails), and do not nail closer than 3/8 inch from edge of moulding. Flex Trim is stable and will not absorb moisture and is ideal for humid environments. It is not affected by heat or cold and can withstand extreme environments. ALWAYS lay out the material to let it relax back into its original shape; this is a good time to double-check molding style and application. NEVER pre-finish the material prior to installation. The material may flex during installation and cause fractures in the finish. ALWAYS make certain that the surface you are applying the material to is flat and smooth. Flexible molding will follow any irregularities in the surface. NEVER use staples or nails with large heads. Keep nails to a minimum and away from edges to avoid bumps at the edge. ALWAYS use a construction adhesive in conjunction with (or in lieu of) nails or screws. This will ensure a quick and easy application and a cleaner finished look.	B006R98II4 Price: $72.32 Score: 7.353 Category: Tools Rating: 4.6 Votes: 89 Find similar products Flexible Moulding - Flexible Flatstock Moulding - WM1X4-3/4 X 3-1/2 - 8' Length - Flexible Trim. Duraflex Flexible Moulding:Moisture & Insect proof.Bends like a belt around your waist.Withstands extreme heat and cold temperatures without warping, cracking or deteriorating. Seamless construction without lamination defects. For interior and exterior use. Install using standard woodworking equipment - cut, sand, shape and finish like wood. Material is Beige in color. Duraflex Flexible Moulding: Moisture & Insect proof. Moisture & Insect proof. Bends like a belt around your waist. Bends like a belt around your waist. Withstands extreme heat and cold temperatures without warping, cracking or deteriorating. Withstands extreme heat and cold temperatures without warping, cracking or deteriorating. Seamless construction without lamination defects. Seamless construction without lamination defects. For interior and exterior use. For interior and exterior use. Install using standard woodworking equipment - cut, sand, shape and finish like wood. Install using standard woodworking equipment - cut, sand, shape and finish like wood. Material is Beige in color. Material is Beige in color. For applications with a minimum radius of 6 or greater.FasteningPolyurethane construction adhesive behind and at miter joints in addition to pneumatic pin nailing is recommended. Use of tape or clamps may be helpful in securing material in position while adhesives bond. Always install Flexible Moulding first is a relaxed non-tensile state. Nails should be kept to a minimum and 3/8” from any edge. For best results, we recommend using Loctite PL Premium Polyurethane Construction Adhesive. Cutting Material can be cut, shaped and sanded using standard woodworking equipment. Note that the wood grain on Stain grade material is only on the surface and will be eliminated if sanded. PaintingPrimer coats are not recommended. Use water based Acrylic Latex Paint. When using Alkyd Enamels an exterior primer such as Kilz is required. When using Alkyd Enamels additional drying time may be necessary. Never paint before installation. The material is flexible and the paint may crack during installation. For applications with a minimum radius of 6 or greater . Fastening Polyurethane construction adhesive behind and at miter joints in addition to pneumatic pin nailing is recommended. Use of tape or clamps may be helpful in securing material in position while adhesives bond. Always install Flexible Moulding first is a relaxed non-tensile state. Nails should be kept to a minimum and 3/8” from any edge. For best results, we recommend using Loctite PL Premium Polyurethane Construction Adhesive. Cutting Material can be cut, shaped and sanded using standard woodworking equipment. Note that the wood grain on Stain grade material is only on the surface and will be eliminated if sanded. Painting Primer coats are not recommended. Use water based Acrylic Latex Paint. When using Alkyd Enamels an exterior primer such as Kilz is required. When using Alkyd Enamels additional drying time may be necessary. Never paint before installation. The material is flexible and the paint may crack during installation.
B00B3YVPDS Availability: Currently unavailable Score: 7.246 Category: Tools Rating: 4 Votes: 3 Find similar products Flexible Moulding - Flexible Half-Round Moulding - WM123-5/16 X 5/8 - 12' Length - Flexible Trim. Duraflex Flexible Moulding:Moisture & Insect proof.Bends like a belt around your waist.Withstands extreme heat and cold temperatures without warping, cracking or deteriorating. Seamless construction without lamination defects. For interior and exterior use. Install using standard woodworking equipment - cut, sand, shape and finish like wood. Material is Beige in color. Duraflex Flexible Moulding: Moisture & Insect proof. Moisture & Insect proof. Bends like a belt around your waist. Bends like a belt around your waist. Withstands extreme heat and cold temperatures without warping, cracking or deteriorating. Withstands extreme heat and cold temperatures without warping, cracking or deteriorating. Seamless construction without lamination defects. Seamless construction without lamination defects. For interior and exterior use. For interior and exterior use. Install using standard woodworking equipment - cut, sand, shape and finish like wood. Install using standard woodworking equipment - cut, sand, shape and finish like wood. Material is Beige in color. Material is Beige in color. For applications with a minimum radius of 6 or greater.FasteningPolyurethane construction adhesive behind and at miter joints in addition to pneumatic pin nailing is recommended. Use of tape or clamps may be helpful in securing material in position while adhesives bond. Always install Flexible Moulding first is a relaxed non-tensile state. Nails should be kept to a minimum and 3/8” from any edge. For best results, we recommend using Loctite PL Premium Polyurethane Construction Adhesive. Cutting Material can be cut, shaped and sanded using standard woodworking equipment. Note that the wood grain on Stain grade material is only on the surface and will be eliminated if sanded. PaintingPrimer coats are not recommended. Use water based Acrylic Latex Paint. When using Alkyd Enamels an exterior primer such as Kilz is required. When using Alkyd Enamels additional drying time may be necessary. Never paint before installation. The material is flexible and the paint may crack during installation. For applications with a minimum radius of 6 or greater . Fastening Polyurethane construction adhesive behind and at miter joints in addition to pneumatic pin nailing is recommended. Use of tape or clamps may be helpful in securing material in position while adhesives bond. Always install Flexible Moulding first is a relaxed non-tensile state. Nails should be kept to a minimum and 3/8” from any edge. For best results, we recommend using Loctite PL Premium Polyurethane Construction Adhesive. Cutting Material can be cut, shaped and sanded using standard woodworking equipment. Note that the wood grain on Stain grade material is only on the surface and will be eliminated if sanded. Painting Primer coats are not recommended. Use water based Acrylic Latex Paint. When using Alkyd Enamels an exterior primer such as Kilz is required. When using Alkyd Enamels additional drying time may be necessary. Never paint before installation. The material is flexible and the paint may crack during installation.	B00BCOOLIK Price: $23.36 Score: 6.993 Category: Tools Rating: 4.3 Votes: 11 Find similar products Flexible Moulding - Flexible Rope Moulding - DE908-1/2 X 1-1/4 - 8' Length - Flexible Trim. Duraflex Flexible Moulding:Moisture & Insect proof.Bends like a belt around your waist.Withstands extreme heat and cold temperatures without warping, cracking or deteriorating. Seamless construction without lamination defects. For interior and exterior use. Install using standard woodworking equipment - cut, sand, shape and finish like wood. Material is Beige in color. Duraflex Flexible Moulding: Moisture & Insect proof. Moisture & Insect proof. Bends like a belt around your waist. Bends like a belt around your waist. Withstands extreme heat and cold temperatures without warping, cracking or deteriorating. Withstands extreme heat and cold temperatures without warping, cracking or deteriorating. Seamless construction without lamination defects. Seamless construction without lamination defects. For interior and exterior use. For interior and exterior use. Install using standard woodworking equipment - cut, sand, shape and finish like wood. Install using standard woodworking equipment - cut, sand, shape and finish like wood. Material is Beige in color. Material is Beige in color. For applications with a minimum radius of 6 or greater.FasteningPolyurethane construction adhesive behind and at miter joints in addition to pneumatic pin nailing is recommended. Use of tape or clamps may be helpful in securing material in position while adhesives bond. Always install Flexible Moulding first is a relaxed non-tensile state. Nails should be kept to a minimum and 3/8” from any edge. For best results, we recommend using Loctite PL Premium Polyurethane Construction Adhesive. Cutting Material can be cut, shaped and sanded using standard woodworking equipment. Note that the wood grain on Stain grade material is only on the surface and will be eliminated if sanded. PaintingPrimer coats are not recommended. Use water based Acrylic Latex Paint. When using Alkyd Enamels an exterior primer such as Kilz is required. When using Alkyd Enamels additional drying time may be necessary. Never paint before installation. The material is flexible and the paint may crack during installation. For applications with a minimum radius of 6 or greater . Fastening Polyurethane construction adhesive behind and at miter joints in addition to pneumatic pin nailing is recommended. Use of tape or clamps may be helpful in securing material in position while adhesives bond. Always install Flexible Moulding first is a relaxed non-tensile state. Nails should be kept to a minimum and 3/8” from any edge. For best results, we recommend using Loctite PL Premium Polyurethane Construction Adhesive. Cutting Material can be cut, shaped and sanded using standard woodworking equipment. Note that the wood grain on Stain grade material is only on the surface and will be eliminated if sanded. Painting Primer coats are not recommended. Use water based Acrylic Latex Paint. When using Alkyd Enamels an exterior primer such as Kilz is required. When using Alkyd Enamels additional drying time may be necessary. Never paint before installation. The material is flexible and the paint may crack during installation.
B0128XYFXE Price: $69.99 Score: 6.579 Category: Tools Rating: 4.9 Votes: 37 Find similar products Edge Supply Walnut 7/8 X 250' Roll Preglued. Walnut Edge Banding, Iron on with Hot Melt Adhesive. Flexible Wood Veneer Walnut Edging Sanded to Perfection. Easy Application, Made in USA. High quality wood veneer edge banding Wood edge banding is used to cover the exposed sides of materials such as particle board, plywood, metal or MDF. The veneer edging increases the durability of your project as well as giving it a perfect finish. Real walnut wood pre-glued edge banding Our walnut wood edge banding is pre-glued with a German high-quality adhesive that provides a strong, permanent bond. The glue is activated by heat and will strongly apply this high-quality veneer edging onto your shelf, furniture or DIY project. You will receive 1 roll of walnut wood, iron-on veneer edging with your purchase. Easy to install plywood edge banding The only tool you need to apply this veneer edging is a regular household iron at cotton temperature. A hot air blower or edge banding machine can also be used if you have these to hand, but a regular iron will be sufficient for a great application. To apply, simply position the veneer edging on the edge of your plywood or other substrate and smooth it with a few passes of an iron or slide it through an edge-banding machine. Suitable for straight-line edges as well as contours. Bandings are impregnated with a high-speed hot-melt glue that creates a permanent, durable bond. BUY NOW and complete your furniture and cabinetry edging with this premium quality, iron-on walnut wood veneer edging Product Description.	B08L9TMSS5 Price: $19.99 Score: 6.410 Category: Tools Rating: 4.6 Votes: 856 Find similar products Edge Supply Maple 3/4” X 50' Roll of Plywood Edge Banding – Pre-glued Real Wood Veneer Edging – Flexible Veneer Edging – Easy Application Iron-on Edge Banding for Furniture Restoration – Made in USA. High quality wood veneer edge banding Wood edge banding is used to cover the exposed sides of materials such as particle board, plywood, metal or MDF. The veneer edging increases the durability of your project as well as giving it a perfect finish. Real maple wood pre-glued edge banding Our maple wood edge banding is pre-glued with a German high-quality adhesive that provides a strong, permanent bond. The glue is activated by heat and will strongly apply this high-quality veneer edging onto your shelf, furniture or DIY project. You will receive 1 roll of maple wood, iron-on veneer edging with your purchase. Easy to install plywood edge banding The only tool you need to apply this veneer edging is a regular household iron at cotton (hot) temperature. To apply, simply position the veneer edging on the edge of your plywood or other substrate and smooth it with a few passes of an iron. Bandings are impregnated with a high-speed hot-melt glue that creates a permanent, durable bond. How to apply Edge Supply Edging 1. Prepare Surface Edge: Fill any large holes, sand rough spots, remove sawdust, cut edging ½ longer than surface to be covered. 2. Apply Edging: Preheat iron on “cotton” setting, position edging, slowly press iron over edging, check to see if glue is melting. Note: Use kraft paper or aluminum foil to protect iron bottom. 3. Bonding: While still hot, press veneer down firmly with wood block or roller, If there is a mistake, simply reheat and reapply. 4. Trim Edge: Allow edging to cool completely, trim any excess with an edge trimmer, a razor blade or file, sand smooth and finish as desired. BUY NOW this premium quality, maple iron-on wood veneer edging.
B01AYD14DY Availability: Currently unavailable Score: 6.410 Category: Tools Rating: 4.5 Votes: 19 Find similar products Edge Supply Birch 13/16 X 50' Roll, Wood Veneer Edge Banding Preglued, Iron on with Hot Melt Adhesive, Flexible Wood Tape Sanded to Perfection. Easy Application, Made in USA. High quality wood veneer edge banding Wood edge banding is used to cover the exposed sides of materials such as particle board, plywood, metal or MDF. The veneer edging increases the durability of your project as well as giving it a perfect finish. Real birch wood pre-glued edge banding Our birch wood edge banding is pre-glued with a German high-quality adhesive that provides a strong, permanent bond. The glue is activated by heat and will strongly apply this high-quality veneer edging onto your shelf, furniture or DIY project. You will receive one roll of 13/16 birch wood, iron-on veneer edging with your purchase. Easy to install plywood edge banding The only tool you need to apply this veneer edging is a regular household iron. A hot air blower or edge banding machine can also be used if you have these to hand, but a regular iron will be sufficient for a great application. To apply, simply position the veneer edging on the edge of your plywood or other substrate and smooth it with a few passes of an iron or slide it through an edge-banding machine. Suitable for straight-line edges as well as contours. Bandings are impregnated with a high-speed hot-melt glue that creates a permanent, durable bond. BUY NOW and complete your furniture and cabinetry edging with this premium quality, iron-on birch wood veneer edging.	B09T2K7H1B Price: $12.99 Score: 6.410 Category: Tools Rating: 4.5 Votes: 9 Find similar products Self Adhesive Floor Transition Strip Carpet & Flooring Transitions Edging PVC Trim Strip (9.84 Feet, Black). Self Adhesive Floor Transition Strip Carpet & Flooring Transitions Edging PVC Trim Strip.