FantasticSearch | E-commerce Search Demo

Scroll to: Top Results

E-commerce Search Demo

AI Assisted Filters

Positive filters:

Negative filters:

Category filter:

Parameters

Query:

Positive filters:

Negative filters:

Category filters: All

AI Assist: ON

Page: 1

Products

Time taken: 2 Max score: 1000.000 Total hits: 100 Full time: 0.0 s
Showing 1-10 of 100 products

B078GRJLMV Availability: Currently unavailable Score: 1000.000 Category: Electronics Rating: 2.8 Votes: 2 Find similar products DoorBird Gigabit PoE Injector A1091. TECHNICAL SPECIFICATIONS The DoorBird A1091 PoE Injector is a compact and robust Gigabit PoE injector, compatible with the PoE IEEE 802.3af standard. Its high-quality metal enclosure has been designed for mounting on walls, ceilings or in control cabinets. The PoE Injector can be used wherever PoE- compatible network devices are supplied with power via network cable. The PoE injector is supported by all PoE-compatible DoorBird network devices, such as the DoorBird IP video door stations, the DoorBird door chime and the DoorBird 2 wired Ethernet PoE converter. GENERAL Dimensions 80 x 76 x 25 mm (L x W x H) or 1.15 x 3 x 0.98 in (L x W x H). Power supply 15 V DC, 1A. Operating condition is -25 to 55C / -13 to 131F. Speed 10/100/1000 M (Gigabit). 2x 10/100/1000M RJ45 1x DC 5.5 mm socket Connectors. PoE IEEE 802.3 af (mode A), IEEE 802.3 at(Mode-A), 15.4 watt. Data line pair is 1/2 (+), 3/6 (-). PoE status LED. 80 metres / 262 feet via Cat.5/Cat.6/ Cat.7 network cable Range.	B003QRQ5DK Availability: Currently unavailable Score: 7.299 Category: Electronics Rating: 3 Votes: 14 Find similar products AIR802 POEPASS-02 Passive PoE Injector/Splitter with 5.5 mm x 2.5 mm DC Size Connector. AIR802 has developed a passive Power-over-Ethernet (PoE) kit or set that allows low cost of delivering power over the network cable for shorter distances. This scheme allows power to be carried on 10/100 networks over the spare, unused pairs of a CAT5, CAT5E, or CAT6 Ethernet network cable. On shorter network lengths, the source power could be the power supply that came with the wireless access point, IP video surveillance camera, etc. This set contains a very cost effective injector and breakout or splitter component. The injector inserts the DC voltage at the source location into the 5.5mm x 2.1mm injector plug. The DC voltage is then carried over the spare pairs of the 10BASE-T or 100BASE-T network cable. The breakout or splitter extracts the DC voltage from the network cable onto the 5.5mm x 2.1mm splitter jack. Two other models are available which have different DC size connectors: model POEPASS-01 with 5.5 x 2.1 mm and model POEPASS-03 3.5 x 1.35 mm. *Note our return policy requires any returns to be in the original packaging. Always check the DC connector size prior to ordering.
B088K1HLM5 Price: $23.99 Score: 7.246 Category: Electronics Rating: 4.1 Votes: 5 Find similar products Outdoor PoE Data Protector Interface with ESD and Grounding for C5X and C5c Radios - Mimosa Gigabit Network Interface. The sleek and affordable Mimosa Gigabit Network Interface Device (NID) is designed for exterior wall mounting, providing outdoor technician access, ESD protection and grounding point for C5X and C5c installation. The dust and water-resistant design have foam cable entry seal and a security fastener tie point. PoE Data Protector for C5x and C5c by Mimosa Networks RJ-45 Gigabit Ports. Protection mode: Line to line and line to ground. Gas discharge tube technology. Elegant, lightweight and aesthetic. For exterior and interior. Nominal voltage: 20 V @ 1 A. Wall mount. Temperature range:-40 ~131°F (-40 ~ 55°C). Humidity: 5 ~ 100 % condensing. Protection grade: IP 54. Dimensions: 3.3 x 1.6 x 131“ (84 x 42 x 131 mm). Weight: 0.28 lbs (0.13 Kg).	B06Y612WG1 Price: $25.76 Score: 7.042 Category: Electronics Rating: 4.5 Votes: 15 Find similar products Hawking Technology Gigabit Power-Over-Ethernet (PoE) Injector Kit Max 54V/0.6A (HPOE2). Flexibility to install a PoE enabled device anywhere! The HPOE2 is a power over Ethernet injector. It provides the most convenient and easy plug & Play solution for your PoE application. Do not worry about how to find a power outlet when using wireless access points, IP cameras, VoIP phones or other PoE powered devices. You can easily deploy in any PoE-enabled device and networking environment. Gigabit network speeds provide the fastest wired networking speeds available.note: PoE injector kit should be installed indoors or in a weather-proof enclosure.
B07XH5GZVJ Price: $199.99 Score: 6.803 Category: Electronics Rating: 4.3 Votes: 10 Find similar products TRENDnet 5 DBI Wireless AC1300 Outdoor PoE+ Omni-Directional Access Point, TEW-841APBO, 4 X 5 DBI Omni Directional Antennas, Point-to-Point & Point-to-Multi-Point WiFi Bridging, IEEE 802.3AT PoE+. TRENDnet’s 5 dBi wireless AC1300 outdoor PoE+ Omni-directional access point, model TEW-841APBO, is designed for point-to-point and Point-to-Multi-Point Wi-Fi bridging applications. The wireless multi-point bridge can be powered with a PoE+ switch or PoE+ injector of your choosing. A variety of installation scenarios are facilitated with access point, WDS bridge, WDS access point, WDS station, and client bridge modes. The IP67 rated housing on the wireless multi-point bridge is designed for outdoor environments, and includes wall and pole mounting hardware. Wireless Multi-Point Bridge Use this dual band wireless AC1300 point-to-multi-point bridge to conveniently link two or more locations together with wireless AC speeds and performance. Wireless Modes Supports Access Point, WDS Bridge, WDS Access Point, WDS Station, and Client Bridge modes for a variety of wireless applications. Outdoor Ready Built for outdoor installations with an IP67 outdoor protection rating and an operating temperature range of -20° – 60° C (-4° – 140° F). PACKAGE CONTENTS TEW-841APBO 2 x Detachable 2. 4GHz 5 dBi antennas 2 x Detachable 5GHz 5 dBi antennas IP67 weather rated cable gland Mounting hardware Quick Installation Guide.	B079YSQGT2 Availability: Currently unavailable Score: 6.757 Category: Electronics Rating: 1 Votes: 1 Find similar products AC1200 Wireless MU-MIMO Gigabit Indoor/O. Brand Tp link Model EAP225-Outdoor Characteristics Hardware - Interface: Gigabit Ethernet port (RJ-45) * 1 (support 802.3af PoE and passive PoE) - Button: Reset - Power supply: 802.3af PoE and 24 PoE passive (PoE adapter included) - Power consumption: 10.5W - Antenna: 2.4GHz: 2 * 3dBi, 5GHz: 2 * 4dBi - Dimensions (W x D x H): 8.5 x 1.8 x 1.1in. (215 x 46 x 27 mm) - Mounting: Post / Wall mounting (Kits included) - Watch Dog: Yes Wireless - Wireless standards: IEEE 802.11a / b / g / n / ac - Frequency: 2.4GHz, 5GHz - Signal Rate: 802.11ac: 5G: 6.5 Mbps to 867Mbps (MCS0-MCS9, NSS = 1 to 2 VHT20 / 40/80) 2.4G: 78Mbps to 300Mbps (MCS8-MCS9 VHT20 / 40, NSS = 1 to 3) 802.11n: 6.5 Mbps at 300 Mbps (MCS0-MCS15, VHT 20/40) 802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps 802.11b: 1, 5.5, 11Mbps 802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps - Wireless functions: Multiple SSID (up to 16 SSID, 8 for each band) Activate / deactivate the wireless radio Automatic channel assignment Transmit the power control (adjust the transmission power in dBm) QoS (WMM) MU-MIMO Equity of airtime Beamforming Band direction Load balance Limit ratio Restart program Wireless schedule Wireless statistics based on SSID / AP / Client - Wireless security: authentication of the captive portal Access control Wireless MAC Address Filtering Wireless isolation between clients SSID to VLAN assignment Rogue AP detection 802.1X compatibility - Transmission power: CE: <20dBm (2.4GHz,.
B00OBW9BOY Availability: Currently unavailable Score: 6.667 Category: Electronics Rating: 5 Votes: 1 Find similar products Black Box 802.3af 10/100/1000 PoE Injector. further Details Sends Data And Power Over A Single Ethernet Cable. Use To Power Ip Phones, Security Cameras, Wireless Access Points, Ip Print Servers, And Other 802.3af-compatible Equipment. Avoid The Cost And Hassle Of Installing Ac Power At A Remote Camera Or Door Scanner. Supports 10-/100-/1000-mbps Midspan Data Connections On Rj-45 Input/output. Protection Includes Overvoltage/current Overload And Short Circuit Protection On The Power Output (per 802.3af Specifications). Diagnostic Leds Indicate Adverse Power Conditions. Detects Unstable Current Measurements, Low Voltage, Incorrect Resistive Signature, And More. Simple Plug-and-play Installation. Compact, Weighs Less Than Half A Pound, And Can Be Easily Wallmounted. Rohs Compliant.	B00ZYX0IQO Price: $10.98 Score: 6.667 Category: Electronics Rating: 4.4 Votes: 116 Find similar products iCreatin Wall Plug Gigabit Power Over Ethernet POE Injector Max 24W Adapter,1000Mbps 802.3af Compliant, Up to 100 Meters (328 Feet). Note: This PoE injector work for 10/100/1000Mbps Gigabit network. The iCreatin PoE Injector can save you money by using an existing Ethernet line to deliver data and power. The iCreatin PoE Injector can easily connect any IEEE 802.3af-compliant device to a non-PoE LAN switch port. This PoE Injector can be used to connect a wireless access point, IP phone, network camera, or any IEEE 802.3af powered device to a LAN switch. Reduce Wiring Costs With the iCreatin PoE Injector you can dramatically reduce wiring costs by powering devices through your existing Ethernet line rather than running new AC power lines. To use this PoE injector, all you need to do is connect the iCreatin PoE Injector to the LAN switch port, and then use your existing Ethernet Cable to deliver DC power and data to your device. Protect Your Equipment Now that you are running DC power to your networked equipment through the Cat5 cabling, you need to be sure that your devices are protected from power problems. The iCreatin PoE Injector is designed with short circuit protection Over Current and Over Voltage Protection, keeping your devices safe. It is also protect your products from overloads Specifications 2 Gigabit Ethernet ports 48-55V output voltage , up to 24W Rated power, support IEEE802.3af, Power feed: V+ 4,5; V- 7,8;and V+ 1,2; V- 3,6; Data rate: 10/100/1000Mbps. Deliver power up to about 328.1 feet(100 meters) Support 100-240V voltage input What in Box? 1 x US wall plug 24watt Gigabit PoE injector.
B07ZJZKHDV Price: $19.88 Score: 6.667 Category: Electronics Rating: 4.1 Votes: 20 Find similar products PLUSPOE PoE Injector Adapter with 2 Ports Max 48 watts Power Over Ethernet for 2 IP Cameras, VOIP Phones, Access Points and Other 10/100M 802.3af/at Devices. The Dual Ports Power over Ethernet Injector, combines electrical power with a 10/100Mbps network connection to produce a Power over Ethernet (PoE) signal. Connect this device to a non-PoE switch and then run an Ethernet cable for up to 100 meters (328 Feet) to network PoE devices. Specifications 4 RJ45 Ethernet ports (2 PoE ports) 48 volt 1.0Amp 48watt power output, 24 watt each port Power feed: V+ 4,5; V- 7,8; Deliver power up to about 328.1 feet(100 meters) Support 100-240V voltage input Package content? 1 x PLUSPOE Dual Ports PoE injector 48v48w 1 x US power cord.	B003QROZB4 Availability: Currently unavailable Score: 6.452 Category: Electronics Rating: 3.3 Votes: 30 Find similar products AIR802 POEPASS-03 Passive PoE Injector/Splitter with 3.5 mm x 1.35 mm DC Size Connector. AIR802 has developed a passive Power-over-Ethernet (PoE) kit or set that allows low cost of delivering power over the network cable for shorter distances. This scheme allows power to be carried on 10/100 networks over the spare, unused pairs of a CAT5, CAT5E, or CAT6 Ethernet network cable. On shorter network lengths, the source power could be the power supply that came with the wireless access point, IP video surveillance camera, etc. This set contains a very cost effective injector and breakout or splitter component. The injector inserts the DC voltage at the source location into the 3.5 mm x 1.35 m injector plug. The DC voltage is then carried over the spare pairs of the 10BASE-T or 100BASE-T network cable. The breakout or splitter extracts the DC voltage from the network cable onto the 3.5 mm x 1.35 mm splitter jack. Other models with various DC size connectors are available. This model is commonly used with Foscam model cameras. Foscam cameras come with 5vdc power supplies. Voltage drops or dissapates naturally over ever foot of cable used. The precise amount of the voltage drop depends on variables like the cable length and quality. There is an abundance of poor quality cable in the market, including patch cords. It is too complex to fully describe here but in general the AWG (size) of the conductor is mis-stated (smaller than than specified) or it may use copper cladded aluminum instead of solid copper as the conductor. Note that Foscam cameras will not work less than 4.5 vdc. Exceeding 1/2 volt loss causes the camera not to operate. Insure quality cable and many are using a higher output power supply, i.e. 6vdc. *Note our return policy requires any returns to be in the original packaging. Always check the DC connector size prior to ordering.