FantasticSearch | E-commerce Search Demo

Scroll to: Top Results

E-commerce Search Demo

AI Assisted Filters

Positive filters:

Negative filters:

Category filter:

Parameters

Query:

Positive filters:

Negative filters:

Category filters: All

AI Assist: ON

Page: 1

Products

Time taken: 4 Max score: 1000.000 Total hits: 600 Full time: 0.0 s
Showing 1-10 of 600 products

B07GQRL17K Price: $29.52 Score: 1000.000 Category: Tools Rating: 2.8 Votes: 9 Find similar products EPC-4 110V Pressure Controller Automatic Pressure Controller Electronic Switch Control Regulator For Water Pump. Features: Designed to automatize the starting and stopping operation of an water pump. Start pressure is 1-1.5 bar, and maximum working pressure can be up to 10 bar. Stopping the pump when senses the lack of water flow, preventing it from any damage dry operation. The pressure gauge checks the starting pressure value and the pressure in the system. Verifies any possible presence of water leakage in the very system. Specifications: Product number: EPC-4 Voltage:110V Frequency: 50/60Hz Max. current: 10A Max. power: 1.1KW Start pressure setting: 1bar-1.5bar Max. working pressure: 10bar Connection thread: R1 Protection grade: IP65 Max. working temperature: 55 Wiring requirements: 7.5-9mm Size: 19.5 x 9.3cm /7.68 x 3.66in Weight: 632g Package included: 1 x Pressure Controller 1set x Accessories 1 x Manual.	B01N7WSP8O Availability: Currently unavailable Score: 7.407 Category: Tools Rating: 5 Votes: 1 Find similar products Switch Pressure 40-60lpc. The Merrill Switch Pressure with Low Pressure CutOff is designed for control of electrically driven water pumps It may be used for all pumps including jet submersible and reciprocating Features. Type 1 Indoor. Enclosure contacts open on rising pressure. 2pole rated 112 hp at 115 Vac 2HP at 230 Vac. Diaphram actuated adjustable cutinout and differential. Low pressure cut off feature to protect the well systemSpecifications. Minimum Pressure 40 PSI. Maximum Pressure 60 PSI.
B07GWJ1PHD Availability: Currently unavailable Score: 6.536 Category: Tools Rating: 3.5 Votes: 2 Find similar products IIL Pressure transducer or Sender, 100 psi (5V), for Oil, Fuel, air, Water. Brand new pressure transducer. Stainless steel body. Input: 0-100 psi. Output: 0.5V – 4.5V linear voltage output. 0 psi outputs 0.5V, 50 psi outputs 2.5V, 100 psi outputs 4.5V. Works for oil, fuel, water or air pressure. Can be used in oil tank, gas tank, etc. Accuracy: within 1.5% of reading (full scale). Current draw: less than 4 mA. Burst (over or max pressure) pressure: minimum 200 psi. Thread: 1/8”-27 NPT. (see our fitting set for other thread size below). Wiring connector: water sealed quick disconnect. Mating connector and wire harness (pigtail) is included. Wiring: Red for +5V. Black for ground. Blue for signal output. Our material is using top of line 316 stainless steel (not 304) and high temperature auto-graded plastic. This is a high quality pressure sender, with ceramic pressure chip sensor inside.	B07G794R6G Price: $12.51 Score: 6.135 Category: Tools Rating: 3.3 Votes: 5 Find similar products HT-60 220V 0.5A G3/4-3/4 Thread Water Flow Sensor Switch for Booster Pump. Specifications: Product model: HT-60 Medium: Tap water, and similar liquid with similar physical and chemical properties Medium pressure: <0.6Mpa Medium temperature: <70 Voltage: 220V Working current: 0.5A Thread: G 3/4 -3/4 Size: 7.4 x 5.7cm /2.91 x 2.24in Weight: 177g Package included: 1 x Pump Flow Switch 2 x Circle.
B00XVQ7KEO Price: $30.99 Score: 6.098 Category: Tools Rating: 4.4 Votes: 117 Find similar products Ac110v Automatic Timed Condensate Drain Valve for Compressed with Power Cable. With about 1.8m Power Cable(3PIN US Plug) Sub-drain valve to simulate circuits and solid state electronic timer solenoid valve to match the compressed air system to achieve automatic timed condensate discharge Widely used in gas tank, drip legs and other compressed air system components There are test button and the intervals, emission time adjustment knob Easy to install, fully automatic operation Specifications: Time interval (OFF): 0.5 to 45 minutes Discharge time (ON): 0.5 to 10 seconds Manual test button (micro switch) Power supply voltage: AC110 50HZ The current consumption of the largest 4mA Ambient temperature: minus 40°C to 60°C Shell material: Flame retardant ABS plastic Electrical connection: DIN43650A Indicator lamp: LED indicating power on / off Type: two two direct-acting valve In / out port size: 1/2 Maximum working pressure: 1.6Mpa Maximum temperature: 90°C Forging brass valve, flow aperture of 5 mm Insulation: class H Protection grade: IP65 Voltage range: ±10% Package included: 1 x Automatic Electronic Timed Drain Valve With US Plug Power Cable.	B00PZE0X94 Availability: Currently unavailable Score: 6.098 Category: Tools Rating: 3 Votes: 1 Find similar products Rego Gas Regulator Valve New 1/2 Female NPT - 100 To 200 PSIG Pressure Final Line Heavy Duty Brass Body (1784C). The BR-1780 Series Regulators are designed for final line pressure regulation on medical oxygen systems. They are equally suitable for a variety of gases in medical or industrial applications. The BR-1780 Series Regulators have a balanced seat, are constructed with oxygen compatible materials, and offer a tamper resistant adjustment screw cap. Flow performance is impressive as well offering up to 30,000 SCFH for the 3/4 and 1 model and up to 20,000 SCFH for the 1/2 model. For Carbon Dioxide or Nitrous Oxide service: Specify EPDM material for seat disc and O-rings, add “E” to end of part number. For Carbon Dioxide or Nitrous Oxide service: Specify EPDM material for seat disc and O-rings, add “E” to end of part number. Maintains a steady downstream pressure across a range of inlet pressure commonly provided by a cryogenic bulk tank. Large seat and diaphragm areas provide high capacity with sensitive control of delivery pressure with low falloff. Two % FNPT delivery pressure gauge ports are located (plugged) on each side of the valve. Two bonnet drain/vent holes to allow for different mounting orientation. Bonnet cap covering adjusting screw for tamper protection. Maximum inlet pressure is 435 psig. Available in four delivery pressure ranges. Temperature range: -40° F to +165° F. Cleaned per CGA G-4.1 for oxygen service. 100% Factory Tested.
B07NY8MB58 Price: $24.59 Score: 6.061 Category: Tools Rating: 4.1 Votes: 176 Find similar products Air Compressor Pressure Valve Switch Control Regulator with Gauges for Fast Pressure Reduction. .	B007FXJA60 Availability: Currently unavailable Score: 5.988 Category: Tools Rating: 4.4 Votes: 3 Find similar products Parker 06R318AC Regulator, Relieving Type, 2-125 psi Pressure Range, Gauge, 75 scfm, 1/2 NPT. 75 scfm at 100 psi inlet pressure with 90 psig no flow secondary setting and 10 psig pressure drop.
B092R7G6W2 Price: $77.9 Score: 5.917 Category: Tools Rating: 4.5 Votes: 363 Find similar products Taprite T742HP Primary Double Gauge CO2 Regulator, Brass. WARNING: THIS PRODUCT CONTAINS ONE OR MORE CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER AND BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM. WASH HANDS AFTER HANDLING. You can use this low-pressure regulator on any CO2 tank with a CGA-320 valve. CO2 tanks have a male thread (CGA-320); these regulators have a female thread. This regulator features dual gauges to measure psi as well as the volume of CO2 in the cylinder, indicating how much CO2 is left in the cylinder and when you should have it refilled. The knob on the front is used to adjust the output pressure. The red polycarbonate bonnet will not chip, break or fade. There is a non-adjustable shut down built into the body of the regulator. The high-pressure ports have left-hand female threads to prevent their use as a low-pressure outlet. The non-removable adjusting screw is designed so that when it is turned all the way in the maximum downstream delivery pressure will not exceed 50psi, with a safety blow off at 60psi. Internal relief valve opens whenever delivery pressure exceeds set pressure by 15psi. This feature serves as a warning that the seat or diaphragm may be worn or damaged and should be replaced. Sintered metal flow control filter in the inlet nipple to prevent dirt and other particles from damaging internal regulator parts. The permanent Quad-Ring Seal on the inlet nipple helps eliminate a source of leaks, so there is no need to use a new fiber washer each time the tank is changed. Outlet features NADS 1600C shutoff which eliminates a source of gas leaks. The duck bill check valve helps prevent product back up into the regulator, a common cause of malfunction in the regulating and relief valve parts. Hose barb end designed for use with 5/16 inch I.D. pressure tubing. All regulators are pressure tested to assure in-field reliability. The seat assembly is easily replaceable, so there is no need to remove the regulator from the tank. Bullets change to: Low pressure gauge (the top gauge) indicates output pressure to the keg The low pressure regulator allows for an adjusted pressure from 1 to 50psi, the maximum downstream delivery pressure will not exceed 50psi High pressure gauge (the side gauge) indicates CO2 tank pressure remaining Duck bill check valve helps prevent product back up into the regulator Assembled and Tested in the USA.	B07YFJT34H Price: $12.3 Score: 5.882 Category: Tools Rating: 4.5 Votes: 953 Find similar products Pressure Switch 120-150 PSI Air Compressor Pressure Switch 1/4-18 NPT Air Pessure Switch 24V 12V Pressure Switch Air Tank High 150PSI Pressure Switch 120PSI Pressure Controller. 1/4 NPT Male Thread: Quick connector,easy to use and no special need for fixing. 120 PSI ON/150 PSI OFF: The pressure switch will automatically turn it on when the pressure is below 120 PSI and turn it off when pressure reaches 150 PSI. Suit for DC/AC Power: DC 24v pressure switch,DC 12v pressure switch,AC 110V 120V 240V etc air pressure switch. Versalite Use :train horn pressure switch,air tank pressure switch,suspension systems air ride pressure switch etc. Service life :100000cycles,long working life air pressure switch,please contact us if any issue.