E-commerce Search Demo
AI Assisted Filters
Positive filters:
Negative filters:
Parameters
Query:
Positive filters:
Negative filters:
Category filters: All
AI Assist: ON
Page: 1
Products
Time taken: 3 Max score: 1000.000 Total hits: 100 Full time: 0.0 s
Showing 1-10 of 100 products
 B09C3HG598 Price: $17.68 Score: 1000.000 Category: Electronics Rating: 3.9 Votes: 46 Find similar products10S 32V 36V 42V 1.2A Li-ion Lipo Lifepo4 LFP Battery Active Equalizer BMS Balancer Inductive Balance Lithium Battery Energy Transfer Board (10S). Note: If the battery is connected, it must be used with the BMS protection board. The charge/discharge voltage difference triggers the balance board to work to achieve energy transfer balance. Applicable battery: NCM(Li-ion)/LFP, NOT Fit LTO. Single battery voltage: 3.0-4.2V Suggested battery capacity: below 30AH, If more than 30AH, pls search B096NLHXPF . Voltage balance accuracy: 30mV (typical value) between adjacent voltages Balance method: Detect that the voltage difference between adjacent batteries is greater than 0.1V to trigger the start of equalization, and the adjacent battery voltage difference is less than 0.03V to stop working. Balance current: 0.1V voltage difference 0.5A balance current, the maximum balance current is 1.2A when the voltage difference is above 0.2V. Under-voltage protection dormant voltage: The adjacent voltage difference is less than 0.03V and enters dormant state. Static working current: 0.01mA Accessories: 30cm 22awg terminal wire Product Size: 3.34x1.77x0.25inch Balance indication: 1. When the balance indicator on, the balance work is turned on. 2. The balance indicator OFF, the balance circuit sleeps, 3. The balance indicator flashes, it drop cells, or the circuit is faulty. Note: The cable plug needs to be inserted obliquely, first touch the B- pin and insert it obliquely, otherwise it may cause the board to burn out! Wiring definition: B-: the total negative pole of the battery pack (the negative pole of the first battery) B1: The positive pole of the first battery B2: The positive pole of the second battery B3: The positive pole of the third battery B4: The positive electrode of the 4th battery B5....... and so on. Package included: 1x Active Balance PCB with 11pin Cable. |  B075MFX6H6 Price: $6.07 Score: 7.519 Category: Electronics Rating: 2.4 Votes: 4 Find similar products3Series 11.1V 12V 12.6V Li ion Lithium 18650 Battery Charging Protection Board PCB BMS Module(10-13A). Specifications: Type(Optional): #1(9-10A), #2(10-13A) Model: 1#:HX-3S-01, 2#:HX-3S-FL10-A Size: #1: 50×16×1.0mm/1.97×0.63×0.04 inch #2: 53×17×4.0mm/2.09×0.67×0.16 inch Over voltage range: 4.25-4.35v±0.05v Over discharge voltage range: 2.3-3.0v±0.05v Maximum operating current: 6-8A Maximum transient current: #1: 9-10A, #2:10-13A Quiescent current: ＜ 30uA Internal resistance: ＜ 100mΩ Charging voltage: 12.6V - 13V Working temperature:﹣40~﹢50℃ Storage condition:﹣40~﹢80℃ Effective life: >30000h Short circuit protection: Yes, delayed self recovery The component included: #1: 1 pcs S-8254AA protection chip, 4 pcs AO4407 #2: 1 pcs 2110-cb protection chip, 2 pcs AOD472 Notes: 1. Higher than 3A current discharge product, the discharge rate of battery discharge is above 3C. 2.Multiplier calculation formula: 1C battery, 2000 capacity is equal to 2AH * 1 = 2A maximum working current. 3C ratio battery, 2000 capacity is equal to 2AH * 3 = 6A maximum working current. 3.In the process of use, if the battery heat, the battery power is not applicable. This situation cannot be used for a long time.Otherwise, the battery will soon be damaged. Package Included: 1×PCB Protection Board(have assembled). |
 B07511RJ9S Price: $10.84 Score: 7.246 Category: Electronics Rating: 3.9 Votes: 106 Find similar products12V 100A 4Series BMS Protection Board with Balancing with Overcharge/Overdischarge/Overcurrent/Short Circuit Protection for LiFePO4 Battery Pack. . |  B07XD824JS Availability: Currently unavailable Score: 7.092 Category: Electronics Rating: 3.5 Votes: 12 Find similar products8S Li-ion Lifepo4 LTO Battery Active Equalizer BMS 1.2A Balancer. . |
 B07G456MS8 Price: $6.99 Score: 6.849 Category: Electronics Rating: 4.7 Votes: 8 Find similar productsNOYITO DC to DC 5A 75W Buck Power Supply Module CC CV DC 5V - 36V Buck to 1.2V - 32V Output ADJ 75W Max Constant Voltage Constant Current Step-Down Power Supply Module LED Driver Board. Module features: 1. High power, high efficiency, 5A, low ripple; 2. Three-in-one: used as a common step-down module with overcurrent protection; used as a charger for various voltage lithium batteries, batteries, nickel-cadmium nickel-hydrogen batteries (batteries), for solar panels, wind power generation Machine and other occasions; used as a high-power LED constant current drive module; 3. There are two modes of constant voltage and constant current, and there are indicators to indicate which mode the module is currently in; 4. When used as a lithium battery charger, you can set the float voltage and charge current, and the indicator light indicates whether it is charging or is full; 5. With current limiting protection, the module will not burn out even if the output is short circuited. Module parameter Input voltage: DC 5V - 36V. Output voltage: DC 1.25V - 32V continuously adjustable. Output current: adjustable, 5A (recommended for use within 4.5A). Output power: 75W (recommended to use within 50W, please reduce power when using large differential pressure). Working temperature: -40~+85 °C. Working frequency: 180KHz. Conversion efficiency: 96%. Short circuit protection: Yes (limit current 8A). Over temperature protection: Yes (automatically turn off the output after over temperature). Input reverse connection protection: None, (If necessary, please input a large current diode in the input string). Installation method: 4 pieces of 3mm twisted wire. Wiring method: terminal block or soldering terminal, V-IN is input, V-OUT is output. Module size: length 68.2mm width 38.8mm height 15mm. Weight: 35g. Note: When using this module for more than 3A, 35W, please strengthen the heat! ! ! Package Included 1Pcs NOYITO DC-DC 5A 75W Buck Power Supply Module. |  B081LYCL4T Price: $8.6 Score: 6.849 Category: Electronics Rating: 3.7 Votes: 24 Find similar productsLIVISN 3S 30A 12.6V Max Li-ion Lithium 18650 Battery Charger Protection Board PCB BMS Batteries Protecting Module (3S 30A). Operating Current: 15A (natural cooling 10A, additional heat sink 15A, the maximum instantaneous current of 30A). Main features: over charge protection, over-discharge protection, short circuit protection, overcurrent protection. No part design on the back, can be attached to the heat sink to ensure that large currents to work long hours. Lift Condition:Protecting release the auto recovery, without activation. Connection: welding output. Module:3S Li-ion Lithium Battery Protection Board overcharge detection voltage :4.25 ± 0.025V overcharge Lift the voltage:4.15 ± 0.05V over discharge detection voltage :2.50 ± 0.08V over discharge Lift the voltage:3.00 ± 0.1V overcurrent current:20-30A working current:15A(Natural cooling 10.A, add heat sink 15A, the maximum instantaneous current 30A) Remove protection condition automatic recovery, without activation Protections: Short circuit protection Overcharge protection Over-discharge protection Overcurrent protection Operating temperature:-40~+85℃ Size:50*22*4mm(L*W*H) Package include: 1 x 3S Li-ion Lithium Battery Charger Protection Board. |
 B07G446KHJ Price: $5.99 Score: 6.803 Category: Electronics Rating: 3.6 Votes: 12 Find similar productsNOYITO DC to DC 5A Adjustable Buck Regulator Power Supply Module CC CV DC 5V - 32V Buck to 0.8V - 30V Output ADJ Constant Voltage Constant Current Step-Down Power Supply Module LED Driver Board. Features: The module uses high-quality chips, high efficiency (up to 95%), low heat generation, maximum 5A current, and TI's op amp control output current, making the overall output very stable. This module uses a low-ESR filter capacitor to reduce ripple voltage to 50mV! Module nature: non-isolated buck module Rectification mode: asynchronous rectification Wiring port: Input mode: IN+ input positive, IN- input negative Output mode: OUT+ output positive, OUT-output negative Input voltage: DC 5V-32V Output voltage: DC 0.8V-30V Output current: Adjustable , Max 5A Conversion efficiency: 95% (maximum) Switching frequency: 300KHz Output ripple: 50mV (maximum) 20M bandwidth Load adjustment rate: +/-0.5% Voltage regulation rate: +/- 2.5% Operating temperature: -40°C to +85°C Size: 51*26.3*14 (length * width * height) (mm) Package Included: 1Pcs NOYITO DC-DC 5A Adjustable Buck Regulator Power Supply Module. |  B07KYMZ1F2 Price: $13.87 Score: 6.711 Category: Electronics Rating: 2.9 Votes: 8 Find similar products14S 30A Professional Li ion Cell BMS PCB Board Lithium Battery Protection Board Fast and Safe Charging. Description: This battery protection board is suitable for 14 series Li-ion cell, and we assure the product is 100% brand new with high quality. It is great for fast and safe charging and over charge protection, over discharge protection, and short circuit protection. The quality is reliable for the load and aging test. Please notice that this product has no balance charging function. Specification: Battery type: 3.7V ternary cell, lithium manganate cell, lithium cobalt cell Discharge current: 30A Weight: Approx. 38g Package list: 1 × Lithium Battery Protection Board Note: This protection board has no balance charging function. |
 B07DRP5DYB Price: $15.29 Score: 6.623 Category: Electronics Rating: 3.4 Votes: 29 Find similar products10S 36V 40A Battery Protection Board BMS PCB Module for Ternary Cobalt Acid with Balance Batteries Power Tools. . |  B07HCP8QFN Price: $5.99 Score: 6.494 Category: Electronics Rating: 4.1 Votes: 13 Find similar productsFASTROHY DC 3v-6v to 400kV Boost Step-up Power Module High-Voltage Generator 400000V. Specification: Voltage: Input DC3.6-6V, output DC400kV - 600KV ( Please note that when security) High Type : Pulse Current High voltage bipolar discharge distance : 10mm-20mm Output voltage lines Length: about 100mm Input power cable length: about 100mm Dimensions : Φ24 * 65mm Input wiring: Red and green power connection red line:+ green line - About Power : 3.7V Li-ion battery can be used single or two series , such as 18650 , idle cell phone batteries ( to remove the protection board , the proposed capacity of 2000mAh or more ) or NiCd / NiMH battery pack , 4V or 6V Lead Acid batteries. |